PP Melt-Blown Filter Cartridge Feature

First, the continuous polypropylene long fibers produced by the melt-blown process are wound with polypropylene as raw material.

Second, high filtration accuracy, large flow rate, uniform structure, large contamination capacity, and long service life.

Third, good chemical compatibility, without any additives, the fiber is not easy to fall off.

Fourth, PP melt-blown filter cartridge with widely used and high dirt retention capacity.

In the deep layer of the filter cartridge, the effect of capturing particulate matter according to the density can be realized, and the effectiveness of the filter core can be given full play.

Higher soil retention means longer service life and lower replacement frequency and cost savings; The surface density of the filter element is low, but from the surface to the center of the filter element, the density increases gradually; There are no surface blind spots that will reduce the flow rate of the filter element and increase the replacement frequency.

High temperature bonded fiber; does not contain moisturizers, antistatic agents and binders; extensive chemical resistance; easy to handle after incineration; meets the requirements of FDA food and beverage industry; does not produce dissolution and release.