Chine (Rép. pop) Biens d'équipement
Biens d'équipement

Rod Making Machine Making Sawdust Briquettes

The new rod making machine is also called wood chip making machine, rice husk rod making machine, sawing rod making machine, sawdust briquette machine, and charcoal briquette machine. This machine is a device for making materials into rod-shaped solid fuel under high temperature and high pressure. The rod making machine uses the thermocouple temperature adjustment indicator, which can set the temperature according to the work needs, the operation is stable and convenient, the heating time is greatly improved, the cost is saved, the benefit is improved, the structure is reasonable, the operation is simple, and the like, the rod making machine can be made mandrel with a diameter of 45mm, 50mm, 55mm.

The Advantages Of The New Rod Making Machine

The rod making machine has high speed, high density of finished product, high molding efficiency, no cracking, easy temperature adjustment, etc. In addition, the screw propeller of the new rod making machine adopts special wear-resistant material, and the service life is several times higher than that of the traditional propeller. Precision casting with special formulated alloy materials, long life, not only saves maintenance costs, but also greatly increases the production efficiency.

The Principle Of The New Rod Making Machine

1. Forming principle

The plant contains a large amount of lignin and cellulose. The lignin has no melting point but has a softening point. When the temperature is 120-160 °C, the hot water-soluble matter in the lignin begins to dissolve, and the lignin will not only dissolve at 180 °C. Softening and plasticizing, when a certain pressure is applied to make it adhere to the fibers and adhere to the adjacent particles. The rod-out technique is formed by heating and extruding this characteristic of the equipment.

2. Molding conditions

People use the principle that equipment can soften, so that they can be formed under certain conditions. Due to the different types of materials, different water content, different volume and specific gravity, the uncertainty of molding conditions are required. It has caused the uncertainty of the rod technology and the complexity of the process. Some technical problems still trouble the customer. Therefore, mastering the rod technology is equivalent to mastering the whole technology of mechanism charcoal production.

Hope this rod making machine can help you know more about rod making machine, if you want to build your own charcoal briquette plant, please contact us.

Localisation : No.45 Agricultural Road, Jinshui District, Zhengzhou, Henan China, 450003 Zhengzhou,
Personne à contacter : Yan Amy, +8615838279423

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Rod Making Machine Making Sawdust Briquettes

Rechercher dans la catégorie : Biens d'équipement
Rechercher dans la catégorie :
briquettes, sawdust, machine, making
Indonésie 29431 Véhicule
2013 Yamaha Raptor 700R SE

Wednesday 16 January 2013

Quantité : 100 - Prix : USD5279

Engine Type 686cc liquid-cooled w/fan, 4-stroke; SOHC, 4 valves Bore x Stroke 102.0mm x 84.0mm Compression Ratio 9.2: 1 Fuel Delivery Yamaha Fuel Injection (YFI), 44mm Ignition 16-Bit ECU Starting System Electric Transmission 5-speed w/reverse; wet multiplate clutch Drive Train 2WD...

KRAMBA TRANSPORTATION

  • 29431 - Batam
  • 6285762075388
Vietnam Divers
photo non disponible

Friday 04 July 2008

3H CO : Sell a lot of rolled bamboo, compressed bamboo, spun bamboo for basket, tray, bowl, flowerpot, coaster, place mat, box with competitive price and high quality.Localisation : 8B6 Ha Huy Giap Str, Thanh Loc ward, District 12, HCM, Personne à contacter : Nguyen huu Hung, +84...

3H CO

Russie 125363 High Tech
photo non disponible

Tuesday 08 May 2012

Glass bead for sandblasting has the features of chemical stability, high mechanical intensity and hardness. They can be blasted onto the object surface with compressed air and can be used on compress glass, rubber, plastic, moulds with metal casting or compressing. The jetting balls...

ermakhim