Chine (Rép. pop) Biens d'équipement
Biens d'équipement

SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber

Quantité : 2000 tons   Prix : USD 0.8-1.3/kg

This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can improve the toughness, bending and tensile strength, shear strength, shock resistance, cracking resistance, and permeability of concrete. Thus, steel fiber concrete is essentially different from ordinary concrete. Welcome to contact us for steel fiber density and other information about this kind of steel fiber.

The Specification of SDS-05030 0.50mm Diameter 30mm Length Glued Hooked End Steel Fiber

Name

SD-05030

Type

Glued

Diameter

0.50mm

Length

30mm

L/D(length/diameter)

60

Tensile strength

>1150Mpa

Application

shotcrete

The Advantages of SDS-05030 0.50mm Diameter 30mm Length Glued Hooked End Steel Fiber

Under the same strength, the amount of concrete can be reduced;

Replace or partially replace the reinforcement;

The glued steel fiber can shorten the construction period, especially suitable for larger projects requiring continuous and rapid concrete pouring;

Compared with ordinary concrete, the same mixing and construction do not need to add new equipment.

USER'S GUIDANCE

Dosage: depending on the application and the minimum dosage is 20kg/㎥-70kg/㎥

Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it on a mixing table, dry, and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.

Put the uniformly mixed fiber concrete into the conveyor and transport.

Concrete pouring and laying should be compacted.

The Safety & Packaging of SDS-05030 0.50mm Diameter 30mm Length Hooked End Steel Fiber

Star Smith is one of professional concrete fiber manufacturers that can offer a wide range of hooked end steel fiber that meets different needs.

Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet,24tons per 20'container.

And the pallets should be waterproof, don't stack pallets on top of each other.

Gloves and eye protection should be used when adding the steel fibers.

Localisation : NO.397 Shunhe Road,Tengzhou Economic Development Zone,Shandong Province,China., 277500 Tengzhou,
Personne à contacter : fiber cnsteel, 0632 5236036

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber

Rechercher dans la catégorie : Biens d'équipement
Rechercher dans la catégorie :
steel, 30mm, length, diameter, 50mm, glued, fiber
Royaume-Uni (UK) PR4 5HY Matériels occasions
photo non disponible

Mercredi 10 septembre 2014

Quantité : 1 - Prix : 234 000,00 €

2000 HEIDELBERG CD 102 -5 Couleurs: 5 Taille: 72 x 102 cm Âge: Count 2000 (Poster Drupa modèle) Impression: 105 millions d' Équipement: CP 2000 - AUTOPLATE - PRESET - Infra Sèche-Rouge - ALCOLOR mouillage - Technotrans centrale de réfrigération - Toutes les laveuses automatiques (blanchets...)

Delfina International Ltd

  • PR4 5HY - Lancashire
  • +447031987697
Taiwan 833 Bâtiment
Heavy Duty Padlock

Mardi 11 août 2015

One Lus International is a professional security padlock manufacturer in Taiwan and provides a series of security padlock to meet customer's needs. The heavy duty padlock is anti-thief hardened shackle, tube and side covers are with high security, the shackle can be taken out. If...

One Lus International Co., Ltd.

Pays-Bas 3454 jc Pro / B2B
photo non disponible

Samedi 29 novembre 2014

Quantité : 1-1000 - Prix : 1,00 €

- - Estamos callos - c molde de inyección fabricante en China son nuestros esencial del diseño para nuestro diseño de moldes 1. Use la estructura base del molde estándar establecido de base del molde de inyección . 2. uso es de acero o las piezas de moldeo de plástico estándar misma...

triple-c

  • 3454 jc - de meern
  • +31 3 06 66 56 78
  • +31 3 06 66 76 38