Chine (Rép. pop) Véhicule
Véhicule

Semi Tipper Trailer buying guide: How to Choose the Right Specs

Quantité : 1   Prix : 15000~26000$

Due to different work requirements and different work sites, the choice of products is also different. Choosing a correct semi tipper trailer model will also improve work efficiency. Below we will provide you with different dump truck models:

What is a tipper semi-trailer?

Tipper trailer can be used in many other fields such as construction, agriculture, etc. They have different shapes and types, which are divided into side tipper trailer and rear tipping trailer.

Semi tipper trailer:

Dump trailers will help you move and unload bulk cargo in a very simple and effective way. Especially when dealing with large jobs. Through carefully designed unloading mechanism, operation safety can be well maintained.

Rear dump trailers are also called rear dump trailers. They are usually used to carry building materials such as sand, stones, ore, and scrap iron.

Lifting principle: The tractor gearbox uses an external power take-off to pressurize the hydraulic oil pump. The hydraulic oil pump controls the hydraulic oil pressure to achieve the lifting or lowering of the hydraulic cylinder. Generally, it can be fully lifted in 30 seconds to achieve unloading.

It is important to note that the length of the dump truck cannot exceed 12m. Because the roadbed is not hard enough, the longer it is, the easier it is to overturn and cause the tipper semi trailer to be scrapped.

End semi tipper trailer for sale

side dump semi trailer

The side tipper is designed to fall sideways for a reason, and you may be forced to unload in areas where there is not enough space.

In this case, you can use side dump trailer to help save space. The load capacity of the side tilted dumper may be greater than that of the rear tractor tipper trailer.

End dump trailer: its body length can be 8 meters to 12 meters, according to customer needs.

Side tipper: suitable for large workplaces, its maximum carrying capacity can reach 80-100tons.

Dump truck

1. Mine place: According to your requirements, the engine can choose 290 ~ 420hp. Choosing a short wheelbase improves the strength of the frame and the passability of the vehicle. For the self-unloading system, you can choose mid-top or front-top.

2. Urban buildings: These trucks usually drive on urban roads with a travel distance of less than 200 km. 336hp or 380hp engine power is the best choice. Choose 6 × 4 or 8X4 tractor according to the load capacity.

3. For transportation distances over 200 kilometers, it is best to use 8X4 to load more goods.

Precautions:

In the process of connecting the tractor to the semi-trailer, attention should be paid to the connection between the tractor and the semi-trailer in all aspects, mainly in the connection between the traction seat and the traction pin and the connection of the electrical circuit.

Connection of saddle and traction pin

Before connecting, carefully check whether there is enough lubricating grease on the surface of the saddle plate of the tractor, and whether there are other foreign objects on the traction pin and traction skateboard of the semi-trailer, to ensure the cleaning of the traction skateboard.

1. Adjust the support legs so that the semi-trailer traction skateboard is compatible with the height of the traction saddle. Generally, the semi-trailer traction skateboard is 1-3 cm lower than the center of the upper plane of the traction saddle of the tractor. Otherwise, sometimes not only can not connect, but also damage the traction seat, traction pin and related parts.

2. Operate the locking mechanism of the traction base to open the locking block into a free state.

3. When the tractor is going backwards, the centerline of the tractor and the semi-trailer should be consistent, and carefully adjust until the tractor and semi-trailer are successfully towed.

4. Check whether the locking block of the traction seat has locked the traction pin and whether it is locked firmly.

5. Slightly advance the tractor and check whether the connection is good.

Welcome to click “Resource“, you can get more article about our trailers.

Click “Product“, you can find your favorite semi trailer.

Localisation : Shandong Titan Vehicle Co., Ltd., 250000 Jinan,
Personne à contacter : Semi trailer TITAN, +8618615679754

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Semi Tipper Trailer buying guide: How to Choose the Right Specs

Rechercher dans la catégorie : Véhicule
Rechercher dans la catégorie :
choose, right, guide, semi, tipper, trailer, buying
France 518057 Matières premières
RTV- 2 caoutchouc de silicone pour la fabrication de moules

Lundi 31 mars 2014

Quantité : ≥200KG - Prix : 5.88 USD/KG~6.98 USD

RTV- 2 caoutchouc de silicone pour fabrication de moules Modèle de produit: INNO SILICE ® IS- CR Dureté: 15 Shore A , 20 Shore A , 25 Shore A , 30 Shore A , 35 Shore A , 40 Shore A Applications: Il est utilisé principalement dans l'industrie de fabrication de moules à la coulée...

Shen Zhen Inno Silica Co.,Ltd

Turquie 175 Pro / B2B
photo non disponible

Jeudi 28 janvier 2016

Quantité : haute - Prix : 2-15 USD

Sarah Gares Çorlu/turkey sarra.gares@fares.com.tr Cher Mr ,Notre entreprise Fares, implantée en Turquie, est spécialiste de l'exploitation minière. Dans ce cadre d'activités, elle s'occupe de la production des matériaux de construction tel que : tous types de ciment (Mortiers)...

Fares yapi kimyasal malzemeleri

  • 175 - çorlu
  • 00905308934540
Thailande 10110 Matières premières
photo non disponible

Mardi 14 juillet 2015

Quantité : 15000MT - Prix : 2500euro

Meilleur prix Scrap chaude cuivre de vente déchets métalliques / cuivre, ferraille fil de cuivre, baie Copper Mill 99,9% ((Fabricant) Nous sommes des fournisseurs de haute qualité fil de cuivre Scrap 99,99% Milberry spécification Fil de cuivre SCRAP, (Millberry) 99,78% à une pureté de 99...)

CA PRODUCTS CO, LTD

  • 10110 - bangkok
  • +66 2 62 61 74 11
  • +66 9 62 91 74 69