Signal SPD
Signal surge protective device (Signal SPD) is actually a signal lightning arrester, which is installed in series in the signal transmission line, usually at the front end of the equipment, to protect the subsequent equipment-all kinds of signal lines and equipment, and prevent lightning waves from influencing the signal line and damaging the equipment.
Its main functions are:
1.Limit the transient overvoltage caused by the induced lightning in the signal line. According to surveys, more than 80% of lightning strikes in electronic systems are caused by induced lightning. Therefore, the wide application of microelectronic equipment in modern society should strengthen the lightning protection of electronic systems and install suitable signal surge protectors.
2.Limit the surge caused by the start and stop of the electronic system. In addition to the lightning induction caused by the surge in the signal line, the most important reason is the start and stop of the electronic equipment. This kind of surge is widespread. The installation of a suitable signal surge protector on the line can effectively suppress the surge caused by the operation of the electronic system, and can effectively reduce the deterioration and failure of electronic sensitive components, and ensure the signal line The stability, prolong the service life of electronic equipment.
Signal surge protectors can be divided into network signal surge protectors, monitoring signal surge protectors, control signal surge protectors, video signal surge protectors, telephone signal surge protectors according to different types of protected lines, Explosion-proof signal surge protectors,s and many other types, each type has many models, parameters and different appearances.
SPD for Network / Data Line Surge Protector
Data line protector series are mainly used in TCP/IP communication networks to protect electrical and electronic equipment's signal line from the impact of lightning electromagnetic pulse, induced over-voltage, transient operation, and resonance overvoltage.
SPD for Audio Surge Protector
With a standard RJ11 interface, The audio signal lightning protection device is suitable for audio signal lightning protection of 1 to 4 pairs of dedicated communication lines and protection of trunk lines and internal lines of program-controlled exchanges.
SPD for Video Signal System
Come With BNC interface, video signal lightning protection device is suitable for monitoring systems and video-on-demand equivalents Axis communication equipment.
Industrial Control Line AI/AO Analog signal RS485 Protector
The control signal lightning protection device is designed to protect the control line system to protect the electrical and electronic equipment's signal line from the impact of the lightning electromagnetic pulse.
SPD for Ethernet Power System
The POE Ethernet series lightning protection device is a lightning protection device developed for POE network power supply equipment in accordance with the standard requirements of IEC61643-21, EN61643-11: 2012, YD5075-98, and IEEE802.3AT.
SPD for Serial Signal System
The serial port signal lightning protection device is designed for communication network line not to be spoiled by lightning over-voltage, induce a voltage, and static discharge.
2 in 1 SPD for CCTV
2 in 1 monitor lightning arrester (power and network/ power and video/ power and control), is designed for a digital camera to protect the camera power and data line/power line/video line from the impulse of lightning electromagnetic pulse, induced over-voltage, operating over-voltage.
3 in 1 SPD for CCTV
3 in 1 monitoring surge protector is designed to protect the analog monitoring equipment ( power, data, control, video) from the damage of lightning electromagnetic pulse, induced over-voltage, operating over-voltage.
Explosion-Proof Signal Lightning Surge Protector
Explosion-proof signal lightning protector is designed for protecting instruments of 2line, 3 lines, 4 lines, from the impact of lightning electromagnetic pulse, induced over-voltage, transient operation and resonance over-voltage, transient operation, and resonance overvoltage.
If you need any kinds of power supply surge protector, please contact us, as a professional surge protector factory, Techwin is willing to offer you high quality products.
Personne à contacter : win Tech, 0755 86215101
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de Signal SPD Rechercher dans la catégorie : Pro / B2B Rechercher dans la catégorie : signal |
Dimanche 24 janvier 2016
Structural Steel Buildings' Advantages: 1. Easy Installation The steel frames are accurately engineered to fit simultaneously, with one end skidding into the other. No exceptional fasteners are required, and fewer employees are required to entire the process. No cutting, retaining...
Hunan ADTO Industrial Group Co., Ltd
- adtosteel
- 413000 - Changsha
- +86 0731 85526339
Jeudi 03 décembre 2015
Quantité : 1000 tons
Notre géotextile perméable géosynthétique est composé uniquement de textiles. Les géotextiles sont utilisés avec la fondation, le sol, la roche, la terre, ou de tout autre matériel connexe de génie-géotechnique en tant que partie intégrante du projet d'origine humaine, la structure...
Tianjin Binjin Fiberglass Prouducts Co. Ltd
- 300400 - Tianjin
- +86 22 26849477
Jeudi 02 juillet 2015
Quantité : 100 - Prix : USD 120
Product Details: Place of Origin: Zhejiang, China (Mainland) Brand Name: Yom Model Number: CZ-1000C Type: Inverter With Charger Output Power: 1000W Output Type: Single Phase Machine Size: 48.5*16.5*8.5cm Machine Weight: 4.7 kg Efficiency: 90% Cooling Way: intelligent Cooling...
Yueqing Yongmao Power Co.,Ltd
- 325600 - WENZHOU
- 8657762216128