Solar panel silicone adhesive
Before The Curing
| Appearance | White Paste |
| Tack Free Time | ≤10 (min) |
| Extrudability | 5~11 (g/s,25℃) |
| Cure Time | 3~7(d) |
After the curing
| Relative Density | 1.40~1.45 (g/cm3) |
| Tensile Strength | ≥2.5 (MPa) |
| Break Elongation | ≥500 (%) |
| Shear Strength | ≥2.0 (MPa) |
| Hardness | 45~55 (Shore A) |
| The Temperature Range | -60~200 (℃) |
| Volume Resistivity | 2.6×1015 (Ω·CM) |
| Dielectric Strength | 20 (kV/·mm) |
| Dielectric Constant | 3.12 |
| Flame Retardant Grade | UL94 HB |
Sample: 300mL / tube, 25tubes / box.

1. Features
ZS-GF-D906W is one kinds of the one-component silicone sealant which is room temperature curing. This product is a kind of special sealant for solar modules, which have the properties such as excellent moisture,quake-proof, corona resistance and leakage resistance. It has excellent resistance about cold and hot alternative performance,and the temperature range is -60℃~200℃. And this product is completely operators in the European Union RoHS directive requirements.
2. The Typical Use
Bonding and sealing solar photovoltaic modules of aluminum frame , junction box ,TPT/TPE film ,steel support on the bacd of solar cells,glass ,solar lamps and so on.
3. Instructions
•Surface cleaning: cleaning the sticklied and coated surface,remove the rust,dirt and oil.
•Brush the glue: Unscrew the hose cap (or cut open), pushed the glue to clean the surface, evenly distributed so that will be glued surfaces together and fixed.
•Curing: put the glued or sealed parts in the air and let it be natural cured. It's one curing process that cured from the surface to the internal, in less than 24 hours (at room temperature and 55% relative humidity) glue curing depth of 2 ~ 4mm, if the sizing location more deeper, in particular, which is not easily accessible to the air, then the fully curing time will be extended, if the temperature is low, the curing time will be extended too, sealant is fully cured at least 7 days if the thick have 6mm .
4. Note
After Operating, unused glue must be sealed and stored , and tighten the cap immediately,. if the seal has a little crust when use it in the next time, remove it and it will not affect the normal use. During the storage process, the canal orifices may appear a small amount of the curing phenomenon, cleared it and it can use it again, and no affection to the product performance.
5. Storage And Transportation
•The product must be stored in a cool, dry environment below 25 ℃, can be storaged below 25 ℃ for six months.
•Such products are non-dangerous goods, can be transported as common chemicals. Be careful during transport and prevent the leakage.
•Should be recognized before being used with or without abnormal if the products exceeding retention period.

Personne à contacter : jiang selina, +086 0769 88888312
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
|
Cette page concerne les importateurs et exportateurs de Solar panel silicone adhesive Rechercher dans la catégorie : Destockage Rechercher dans la catégorie : panel, solar, silicone, adhesive |
Tuesday 14 February 2023
Bulb light applied with patented LED technology. It can sterlize the air and surface around while offer general ligting. Specification of Bulb Light UVWL12BLXX93 Model Input Voltage Power Efficacy CCT CRI Size Package Bulb Light UVWL12BLXX93 AC100-265V AC175-265V 12W ...
Foshan Feiliu Enterprise Management co.LTD
- 528300 - Foshan
- 86 757 29311003
Friday 24 May 2024
Overview of Ti Gr1 Titanium Plate Yesheng Ti Gr1 Titanium Plate is a high-quality, commercially pure titanium plate made from grade 1 titanium. Ti Gr1 Titanium Plate Manufacturer is a popular choice because of its excellent strength, low weight, and good corrosion resistance, making...
Baoji Yesheng Titanium Industry Co.,LTD
- yesheng
- 721013 - baoji
- 0917 3906666
- +8615289358824
Friday 08 July 2022
Quantité : 100
Caractéristiques Type Ampoule intelligente Type d'ampoule LED Type de culot E14 Couleur de la lumière Variable Température de la couleur (min) 2000 K Température de la couleur (max) 6500 K Flux lumineux 470 lm Puissance de l'ampoule 5.3 W Puissance ampoule équivalente 40 W Durée...
MaKant Europe GmbH & Co. KG
- 60386 - Frankfurt am Main
- +49 (69) 9 150 750 14
Paiement sécurisé





