SSAW Transmission Pipe

SSAW Transmission Pipe

Standard: API 5L, ASTM A252, ISO 3158, EN 10208

Grade: Q235A, Q235B, Q345, L245(B), L290(B), L290(X42), L320(X46), L360(X52), L390(X56), L415(X60)

Size: SAW SSAW:

Outer Diameter: 219.1mm-4064mm (8”-160”)

Wall Thickness: 3.2 mm-40mm

Length: 6mtr-18mtr

Use: Used for liquid delivery and gas delivery, such as water supply, drainage and oil, gas, vapour, liquefied petroleum gas and natural gas.

End: Square ends (Straight cut, saw cut, and torch cut), or beveled for welding, beveled.

Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE)

Packing: Plastic plugs in both ends, Hexagonal bundles of max. 2000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVE sleeve, and sackcloth with several steel strips, Plastic caps.

Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.

Third party inspection: SGS, BV, Lloyds etc.