Chine (Rép. pop) Biens d'équipement
Biens d'équipement

Steel Pipe Shot Blasting Machine

Shot blasting pipe shot blasting machine is a new type of special shot blasting equipment designed to user requirements, which is specially used for cleaning the outer wall of large circular steel and wind power wind towers, and in some situations to clean inner and outer walls surfaces of steel .

Specification of Steel Pipe Shot Blasting Machine

Features of Steel Pipe Blasting Machine

1. The shot blasting device adopts an upward shot blasting arrangement. Because the bottom surface of the steel pipe with different diameters is conveyed on the roller table at the same height, the shot blaster shoots from bottom to top, and the distance between the abrasive and the surface of the steel pipe is basically the same, that is, the cleaning effect is more uniform.

2. The workpiece continuously passes through the inlet and outlet of the shot blasting machine. Due to the cleaning of the steel pipe with a large diameter, in order to prevent the abrasive from flying outside, the machine uses a multi-layer replaceable sealing brush to achieve a perfect seal to the abrasive.

3. The use of centrifugal cantilever novel high-efficiency multi-function shot blasting machine, large shot blasting amount, high efficiency, rapid blade replacement, with the overall replacement performance, easy maintenance.

4. Simulated abrasive diagram (including the determination of the model, number and spatial layout of the shot blasting machine) and all drawings of the shot blasting machine are completely drawn by computer-aided design. The utilization rate and labor productivity of the abrasive are improved, the cleaning effect is ensured, and the wear on the chamber bodyguard plate is reduced.

5. A full-curtain BE-type slag separator is used, which greatly improves the separation amount, separation efficiency and shot blasting quality, and reduces the wear on the shot blasting device.

6. Rolling Mn13 steel plate is used for protection in the cleaning room, and the protective plate is fixed by a special nut. It is simple and convenient to replace and has a long service life.

7. Conveying linkage line: The transmission linkage line can realize step-less speed regulation through frequency converter. In order to ensure that when the steel of various specifications are shot at a specified speed, the steel pipe has enough turnover times in the shot blasting chamber to obtain the best shot blasting effect. The adjustment of the roller spacing is done by the adjusting device. Each roller group is connected by a connecting rod, so that synchronous adjustment can be achieved. The adjustment method can be adjusted according to different pipe diameters according to user requirements. Each roller can rotate around the center of the bracket to adjust its angle to the conveying direction. When the speed of the roller is constant, the conveying speed and rotation speed of the workpiece is changed. The angle of the roller is adjusted synchronously by the ratchet and pawl mechanism. The power of each roller is generated by the reducer, and different numbers of reducers can be arranged according to the power requirements. The outer circle of the roller is solid rubber, which has both elasticity and wear resistance and can effectively support the steel pipe.

8. The steel pipe keeps rotation.

9. The dust collector adopts environmental protection pulse filter cartridge blowback dust collector. The dust collector has a large filtering area and good filtering effect.

10. The machine design is novel in design, easy to use and maintain.

11. Using an automatic fault detection device to realize an automatic shutdown alarm function. This machine has the characteristics of advanced structure, reasonable design, reliable operation and high production efficiency.

12.With no pit structure, easy maintenance.

Steel Pipe Shot Blasting Machine Structural Characteristics

  1. Cleaning Sequence

Loading (user-supplied) → linkage line → enter shot blasting room → shot blasting (workpiece rotates while advancing) → feed out shot blasting room → linkage line → unloading (user-supplied)

  1. Abrasive Circulation Sequence

Abrasive Storage → Flow Control → Shot Blasting Workpiece → Bucket Elevator Vertical Lift → Pellet Separation → (Recycling)

  1. Structural characteristics

The structure of the machine consists of feeding roller table (12 meters), shot blasting machine, feeding roller table (12 meters), air control system, electric control system and dust removal system. The pipe shot blasting machine is composed of shot blasting chamber, shot blaster assembly, shot hopper and grille, shot slag separator, elevator, platform ladder railing, shot supply system and other components.

BHis a professional blasting equipment suppliers, we provide shot blasting machine china, air blasting equipment, etc.

Localisation : No. 208, Haixi Road, The New West Coast District, 266400 Qingdao City,
Personne à contacter : Xenia Lee, 0532 88068506

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Steel Pipe Shot Blasting Machine

Rechercher dans la catégorie : Biens d'équipement
Rechercher dans la catégorie :
machine, blasting, shot, pipe, steel
France 78310 Hygiène / Santé
Cubitainers de LIQUIDE VAISSELLE + GEL DOUCHE + LAVE-LINGE

Mercredi 08 mai 2024

Quantité : 25 tonnes - Prix : A determiner

CUBITAINERS DE GEL DOUCHE + LIQUIDE VAISSELLE + LAVE-LINGE DE TRES GRANDE MARQUE - SOCIETE ATOUT NEGOCE - destockage, valorisation et réemploi des produits. ENTREPOT: 12 - 14 rue Fresnel ZAI PARIWEST 78310 COIGNIERES- MAUREPAS Port: 06.16.59.07.14 Tél: 09.65.31.82.44 Localisation ...

ATOUT NEGOCE

Pays-Bas 3454 jc Pro / B2B
photo non disponible

Samedi 29 novembre 2014

Quantité : 1-1000 - Prix : 1,00 €

- - Estamos callos - c molde de inyección fabricante en China son nuestros esencial del diseño para nuestro diseño de moldes 1. Use la estructura base del molde estándar establecido de base del molde de inyección . 2. uso es de acero o las piezas de moldeo de plástico estándar misma...

triple-c

  • 3454 jc - de meern
  • +31 3 06 66 56 78
  • +31 3 06 66 76 38
France 450000 Matières premières
CE and ISO Phot хорошее - качество окалины ролика мяч пресс машины resión de la pelota

Dimanche 10 août 2014

Quantité : 25 - Prix : USD 3500-88888

Цена Fob: $ 1000-35000 Порт: Qingdao/Tianjin Минимальный заказ: 1 Комплект/комплекты Способность поставки: 25 Комплект/комплекты в Месяц Срок поставки: 20 производства после того как мы получили специальные шарики Термины компенсации: L/C,D/A,D/P,T/T Localisation ...

Henan Zhengzhou Yonghua Machinery

  • olina1
  • 450000 - zhengzhou CITY
  • +13 6 07 69 93 63