TD300/Mark VI Cheap Automatic Donut Machine-Yufeng
Yufeng TD300 makes donut production faster and easier than open kettle frying. Less training is required to work the system efficiently, and more consistent quality can be achieved. The automatic fryer can reduce shortening consumption by as much as 50% compared to standard fryers. It provides identical frying conditions for each donut, without an operator needing to stand over the fryer to insert, turn and lift donuts out manually. The Fryer with the addition of optional Feed Table, Trays, and Cloths, capacity approximately 100 dozen donuts per hour, at 90 seconds frying time.
Personne à contacter : hangzhong liang, 075488222355
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
|
Cette page concerne les importateurs et exportateurs de TD300/Mark VI Cheap Automatic Donut Machine-Yufeng Rechercher dans la catégorie : Pro / B2B Rechercher dans la catégorie : cheap, machine, automatic, donut, yufeng, td300, mark |
Tuesday 16 June 2015
Quantité : 10000m2/we - Prix : USD 80-90/m2
Woven Middle Speed Corrugator Belt Woven High Speed Corrugator Belt was developed to high speed running and rapid dying of the corrugat ed board.the structure and the quality of the belt facilitates steam evaporation from the paperboard .The surface of the belt is twill weave to...
Huatao Wire Belt Factory
- 050000 - shijiazhuang
- 86 311 80772027
Tuesday 01 September 2026
▲VE-30RFM RX (Front / Rear) ▲VE-30RFM TX (Front / Rear) VE-30RFM HDMI to RF Matrix Extender is designed to convert HDMI signal to HD digital TV signal based on DVB-T CATV signal, it uses 64QAM mode to realize the HD digital TV signal conversion and transmit via coaxial cables for...
Meicheng Audio Video Co., Ltd.
- meicheng
- 23511 - New Taipei City
- 886 2 82280311
Thursday 06 August 2015
Quantité : 30 sets
The X. Y& Z axes utilize AC servo motors. Multi-cavities machining, ORBIT-CUT machining & Helix machining. A.T.C. (Automatic Tool change) & C-axis machining available. The Circle Angle of Sparking is lower than 0.02mm. The best surface roughness (Ra) is better than 0...
Sane Kuei Machinery Co., Ltd
- Sane Kuei Machinery Co., Ltd
- 24158 - New Taipei City
- +886285112370
Paiement sécurisé




