Chine (Rép. pop) Divers
Divers

UAV Motor Series

Prix : 100USD

Direct mount propeller or Hub style compatible

Multi-length mounting hardware included

High Power N42sh magnets

Precision NMB bearings

12v Brushless Motor Series

Motor efficiency is typically calculated by dividing thrust by power at 100% throttle, measured in gram/watt. The higher this number is, the more efficient the motor.

High thrust drone motors are important to look at efficiency through the whole throttle range though, not just the top end. Some motors might be efficient at lower throttle but could lose efficiency by drawing increasingly higher current as they approach their limits.

With less efficient motors not only are you wasting energy and flight time, your batteries might also suffer from voltage sag, this effect will be compounded if you are using poor quality LiPo batteries.

Remember that Watt is calculated by multiplying voltage and current, as we know the voltage of the battery we will be using. Another good way to look at efficiency is to use gram/amp (thrust/current).

Generally, the more thrust generated, the larger the current drawn to produce that thrust, so uav motor with high thrust and low current are preferred. Inefficient motors either generate too little thrust or draw too much current.

If you want your plane to fly longer, we suggest that you consider these motors.

U series motors are designed specially for long flight time drones. These motors are highly efficient, light, and run smoothly.

With the guarantee of strength, the caps of U motors are highly hollow-cutted to save weight, so that these motors can reach maximum thrust to weight ratio and gain more flight time.

U series motors are tested with the strictest procedures of TTF's QC protocols. Each of these motors are dynamically balanced with our high-test standard. The axial and radial runouts of each rotor are tested strictly

Features:

• High Power N42sh magnets

• Precision NMB bearings

• 0.2mm laminations for optimal efficiency

• Ample cut to length motor wires for a clean install

• Direct mount propeller or Hub style compatible

• Multi-length mounting hardware included

U2212/ U3506/ U5208 motors are applicable for 300-500mm class multirotor.

Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. We provide drone frame kit, fastest drone motors and etc. For more information, please feel free to contact us!

Localisation : NO.15 Chaoyang road, Yanluo street, Songgang town, Baoan District, Shenzhen , 518055 Shenzhen,
Personne à contacter : flying titan, +75 5 21 53 90 34

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
UAV Motor Series

Rechercher dans la catégorie : Divers
Rechercher dans la catégorie :
motor, series
Taiwan 23511 High Tech
VE-30RFM HDMI to RF Matrix Extender

Tuesday 06 January 2026

▲VE-30RFM RX (Front / Rear) ▲VE-30RFM TX (Front / Rear)  VE-30RFM HDMI to RF Matrix Extender is designed to convert HDMI signal to HD digital TV signal based on DVB-T CATV signal, it uses 64QAM mode to realize the HD digital TV signal conversion and transmit via coaxial cables for...

Meicheng Audio Video Co., Ltd.

  • meicheng
  • 23511 - New Taipei City
  • 886 2 82280311
Taiwan 833 Véhicule
Bike Padlock

Tuesday 11 August 2015

Prix : 1$ ~30 $

One Lus International is a professional bike & motorbike lock manufacturer in Taiwan and provides a series of security padlock to meet customer's needs. The utility padlock is made of bolt cropper and hacksaw-resistant locks with an integral 5-disc locking mechanism. With a dia...

One Lus International Co., Ltd.

Taiwan 429 Pro / B2B
Eumach Co., Ltd.

Tuesday 06 January 2026

<< Stable Operations, Continued Growth >> 5 Axis Machining Center-Eumach Co., Ltd. Eumach Co., Ltd. is a fresh business of machine tool industry, and concentrates on manufacturing 5 axis machining center, vertical horizontal machining center, universal milling machine...

Eumach Co., Ltd.

  • 429 - Taichung City
  • +886 4 2581 0031