PTFE - 1039 Annonces

Vendredi 24 mai 2024

UHMWPE slide plate is a new polymer wear-resistant material specially developed by Xinrui for bridge bearings. As a professional ultra high molecular weight polyethylene supplier, we provide wear-resistant bridge support plates and UHMWPE bridge bearing plates, ensuring smooth and...

Vendredi 24 mai 2024

Nowadays, steel lined PTFE pipe fittings are one of the most commonly used pipe fittings in the domestic chemical industry. As one of the professional PTFE lined pipe manufacturers, Xinrui Plastic offers PTFE lined carbon steel pipe that has excellent anti-corrosion and high temperature...

Vendredi 24 mai 2024

Silicone rubber is known for its excellent temperature resistance, with the ability to withstand extreme heat and cold without losing its physical properties. This makes it suitable for applications in a wide range of industries, including automotive, aerospace, electronics, medical...

Vendredi 24 mai 2024

PTFE surface itself is not adhesive, such as want to bond and other substances must need one side and two sides after Nana chemical treatment, and rubber, metal, and other substances bond, in special use, make up for the non-adhesive performance of polytetrafluoroethylene products...

Vendredi 24 mai 2024

PTFE tubes/ from PTFE tube/ pipe supplier are made from polytetrafluoroethylene resin, a synthetic polymer that is highly resistant to heat, chemicals, and mechanical stress. PTFE's chemical inertness allows it to maintain its properties even under extreme conditions, making it an...

Vendredi 24 mai 2024

A PTFE slide plate is a specialized component used in structural and mechanical applications. It consists of a flat plate made of polytetrafluoroethylene (PTFE), which has low friction properties. It is used to facilitate smooth sliding and movement between two surfaces, reducing...

Vendredi 24 mai 2024

PTFE slide bearing plates are made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease groove, machined into various specifications of sliding block. Has very high compressive strength, low friction coefficient, excellent aging resistance...

Vendredi 24 mai 2024

Quantité : 10000pcs p - Prix : 10-100usd/pc

Casting valves(válvulas) Type: Butterfly valves, Gate valves, Check valves, Global valves, Y strainer Size: DN40-1200 or 1.5-48' or above Working Pressure: PN10/16/20/25,150LB-2500LB Suitable temperature: -45c~150c Standard: (1)Design and manufacture: DIN3352, BS5163,BS5150, ANSI B16...

Vendredi 24 mai 2024

DSH SPGW Hydraulic Piston Seal For Excavator DSH SPGW compact Seal is a four pieces double acting heavy duty compact seal which consist of one PTFE bronze profile ring,one elastomeric nitrile rubber pre-load sealing element and two POM back -up rings. 1. Standard material: Seal:...

Jeudi 23 mai 2024

Quantité : 1roll/pk - Prix : USD900/roll

- Introduction: MS Polytetrafluoroethylene(PTFE) membranes consists of a pure PTFE tortuous pore structure. PTFE membrane filters are naturally hydrophobic, they are very useful for aerosol sampling, air venting and gas filtration, especially in environments also containing water vapor...

Jeudi 23 mai 2024

Quantité : 100PCS/PK - Prix : USD20/PK

- Introduction: Superpure offers unsurpassed quality, consistency and reliablility of result to increase sample throughput while reducing thumb pressure. Under designed state-of-art injection technology, syringe filter is produced for 17mm and 30mm. HPLC certification is owned for each batch...

Jeudi 23 mai 2024

BRT PTFE Back Up Rings Fits Excavator BRT type PTFE+copper powder material Seal ring back support ring. BRT back up ring seal series materials are: PTFE-polytetrafluoroethylene material and copper powder polytetrafluoroethylene. The addition of copper powder PTFE has higher wear resistance...

Jeudi 23 mai 2024

Sanping Back Up Ring China buck up ring seal is a thin ring designed to prevent the O-ring from extruding under pressure. They are installed in the gland between the seal and the gap to provide zero gap. Types of Backup Ring Seals BRT Back Up Ring Fits Excavator N4W Back Up Ring Fits...

Jeudi 23 mai 2024

Ningbo Fidek sealing technology co.,ltd. Heat Prevention Products Factory was founded in 2004, is professional China Oven Door Sealing Rope Manufacturers,Fireplace Sealing Tape/Rope Suppliers. Main products include fiberglass products, ceramic aluminum silicate fiber products, silicone...

Jeudi 23 mai 2024

PTFE material is almost not corroded by any chemical substances, including strong acids, strong alkalis, organic solvents, etc., which can effectively prevent chemical corrosion from damaging silicon wafers; PTFE silicon wafer boxes can maintain stable performance in the temperature...

Jeudi 23 mai 2024

PTFE material is almost not corroded by any chemical substances, including strong acids, strong alkalis, organic solvents, etc., which can effectively prevent chemical corrosion from damaging silicon wafers; PTFE silicon wafer boxes can maintain stable performance in the temperature...

Jeudi 23 mai 2024

Quantité : 1kg - Prix : $14-20

Our factory founded in 1998 is a professional manufacturer that produces PTFE Powder. We have the most advanced ultra-fine pulverization equipment, top detection technology and great technologies. Until now we have had a history of 16 years on production and sales. Because of the...

Jeudi 23 mai 2024

Quantité : 1kg - Prix : $14-20

Our factory founded in 1998 is a professional manufacturer that produces PTFE Powder. We have the most advanced ultra-fine pulverization equipment, top detection technology and great technologies. Until now we have had a history of 16 years on production and sales. Because of the...

Jeudi 23 mai 2024

Quantité : 10000 - Prix : $1.2/pce

1. Specification: （1）.High strong shred-resistant floss: Bamboo charcoal,others like polyester,nylon,UHMWPE,PTFE,natural silk can be chosen （2）.Floss length in Max: 50M （3）.Available in Waxed, Unwaxed, and Mint Waxed （4）.Flavor: Mint, bubblegum, aloe vera flavor or as customizable （5）...

Jeudi 23 mai 2024

Quantité : 1kg - Prix : $14-20

Our factory founded in 1998 is a professional manufacturer that produces PTFE Powder. We have the most advanced ultra-fine pulverization equipment, top detection technology and great technologies. Until now we have had a history of 16 years on production and sales. Because of the...

Jeudi 23 mai 2024

Quantité : 10000 - Prix : $0.8/pce

1. Specification: （1）.High strong shred-resistant floss: Natural silk floss,others like polyester,nylon,UHMWPE,PTFE,bamboo charcoal can be chosen （2）.Floss length in Max: 30M （3）.Available in Waxed, Unwaxed, and Mint Waxed （4）.Flavor: Mint, bubblegum, aloe vera flavor or as...

Jeudi 23 mai 2024

Quantité : 1kg - Prix : $14-20

Our factory founded in 1998 is a professional manufacturer that produces PTFE Powder. We have the most advanced ultra-fine pulverization equipment, top detection technology and great technologies. Until now we have had a history of 16 years on production and sales. Because of the...

Jeudi 23 mai 2024

Quantité : 200set/mon - Prix : 200USD/set

Les vannes à vannes à porte-couteaux sont connues sous le nom de vannes de porte à lisier. C'est valve bi-directionnelle de porte de couteau de gaufrette. Il est principalement conçu pour les fluides fortement concentrés. Avec une plaque d'O-port de passage, par des valves de porte...

Jeudi 23 mai 2024

Quantité : 200sets/mo - Prix : 300USD/set

Les vannes pneumatiques unidirectionnelles à soupape de valve sont connues sous le nom de vannes de porte à lisier. Ses sont valves de lame unidirectionnelles de porte de bord de couteau utilisées sur le pipeline industriel pour le fonctionnement de marche-arrêt. La structure du corps...

Mercredi 22 mai 2024

Quantité : 200set/mon - Prix : 200USD/set

Les vannes de porte-couteaux électriques de valves libres sont connues sous le nom de vannes de porte à lisier. C'est valve de porte de couteau unidirectionnelle avec le capot. La structure entièrement fermée du corps-bonnet assure une fuite nulle de la porte du couteau à l'environnement...

Mercredi 22 mai 2024

Quantité : 200set/mon - Prix : 200USD/set

Les vannes de porte-couteaux bi-directionnelles de valves libres sont appelées vannes de porte de lisier. Son sont vanne bidirectionnelle traite avec écoulement dans les deux sens, tout en offrant zéro fuite. La conception du siège périphérique u – Shape assure un écoulement plein-port...

Mercredi 22 mai 2024

Quantité : 1000000000

CiXi Feite Matériel d'étanchéité Co Ltd, il est l'un des joints, des emballages d'étanchéité et de l'isolation industrielle fabricant et fournisseur en Chine, la société est située à CiXi, Ningbo, en Chine. Nous sommes spécialisés dans la conception, la fabrication et l'exportation...

Mercredi 22 mai 2024

Compared to PTFE material, TFM has some improved characteristics. For example, with lower background values, it has better resistance to deformation, permeability, and recoverability under high temperature and pressure. We can produce various models of microwave digestion containers using molds...

Mercredi 22 mai 2024

Customizable specifications and sizes can be made based on the outer tank of the digestion container Can be used for sample pretreatment in atomic absorption spectroscopy and plasma emission analysis; It can also be used for low-dose synthetic reactions; Sample pre-treatment is performed...

Mercredi 22 mai 2024

Quantité : 1kg - Prix : $14-20

Our factory founded in 1998 is a professional manufacturer that produces PTFE Powder. We have the most advanced ultra-fine pulverization equipment, top detection technology and great technologies. Until now we have had a history of 16 years on production and sales. Because of the...

Mercredi 22 mai 2024

Quantité : 1kg - Prix : $14-20

PTFE Powder is a kind of free-flowing white powder with low molecular number. The molecular has stable structure, good chemical resistance, high electrical resistivity and fire resistance as well as great self-lubricating property, heat endurance, weather ability, aging resistance...

Mercredi 22 mai 2024

Quantité : 1kg - Prix : $14-20

Our factory founded in 1998 is a professional manufacturer that produces PTFE Powder. We have the most advanced ultra-fine pulverization equipment, top detection technology and great technologies. Until now we have had a history of 16 years on production and sales. Because of the...

Mercredi 22 mai 2024

Quantité : 1kg - Prix : $14-20

PTFE superfine powder-B01 is a star product of the factory. It keeps the features of polytetrafluoroethene, such as, good chemical stability, strong acid resistance, strong alkali resistance, high temperature and low temperature resistance, and it has better dispersing property! PTFE...

Mercredi 22 mai 2024

Quantité : 1kg - Prix : $14-20

PTFE superfine powder-B01 is a star product of the factory. It keeps the features of polytetrafluoroethene, such as, good chemical stability, strong acid resistance, strong alkali resistance, high temperature and low temperature resistance, and it has better dispersing property! PTFE...

Mercredi 22 mai 2024

Prix : USD 10~80 / Pieces

Sintered Metal Filter Cartridge Technical Parameter Raw Material: SS 316L, SS 304 Filter Rating: 0.5-300 Microns Filter Efficiency: > 99 % Operation Temperature: ≤ 816 ℃ Outside Diameter: 10-380 mm Length: 254 mm, 508 mm, 762 mm, 1016 mm or others Gasket: PTFE, Viton, Silicone...

Mercredi 22 mai 2024

SCW Medicath, one of the professional medical guidewire manufacturers in China, supplies both coated and uncoated medical guide wires. Guidewire medical components include core wire (nitinol), guide wire spring ring (304 stainless steel) and guide wire tip. The teflon coated guidewire...

Mardi 21 mai 2024

Quantité : ISO 9001

brass gas ball valve NPT thread brass ball valve price Product Description Description of valve part Material Body Forged brass body full port End Connection Threaded ends(1/2"TO4"),600WOG,150 SWP Ball SS304 Seal on stem EPDM or plastic Stem Steel Ball...

Mardi 21 mai 2024

Quantité : ISO 9001

JKTL heating system dn40 water ball valve Product Parameter Number Parts Material 1 Valve Body Steel .DIN St/37.0/37.8 2 Axis Guide Steel .DIN St/37.0/37.8 3 Valve Ball Stainless Steel AISI304 4 Stem Stainless Steel AISI304 5 Ball Valve Seal Carbon reinforced PTFE ...

Mardi 21 mai 2024

China Floating Ball Valve UTMOST, a floating ball valve factory, floating ball valve supplier, floating ball valve manufacturer, offers different floating ball valve types at a good float ball price. The floating ball valve has a simple structure and good sealing performance, but...

Mardi 21 mai 2024

China Eccentric Butterfly Valve In contrast with the concentric butterfly valve, a butterfly valve whose stem axis deviates from the center of the disc and the center of the body at the same time, and the sealing pair is an oblique vertebra, is called an eccentric butterfly valve...

Mardi 21 mai 2024

China Double Eccentric Butterfly Valve As one of the best double eccentric butterfly valve manufacturers and double eccentric butterfly valve suppliers in China, UTMOST provides types of superior China double eccentric butterfly valve. The double eccentric butterfly valve China structure...

Lundi 20 mai 2024

Quantité : 10000 - Prix : 5,71 €

Macro cells with ptfe lid, Absorption Cells, two clear windows, Path Length: 1mm,10mm~100mm Brand: BSDLab or Whitelabel Volume: 35µl - 35000µl Different materials available: (ES/UV Quartz,IR Quartz,Optical Glass) BSDLab cells: UV Quartz cells for 190nm-2500nm, IR Quartz cells...

Lundi 20 mai 2024

Prix : 14,85 €

Améliorez your culinary experience with the ensemble of casseroles Royalty Line RL-FS2M 3 pieces with a marble finish, a polyvalent addition to your cuisine that is effortless in style, functionality and respect for the environment. This complete ensemble comprises two casseroles...

Lundi 20 mai 2024

JKTL stainless steel globe valve price Product Description No. Part Name Qty Material 1 Body 1 316 Stainless Steel ASTM A351CF8M 2 Disc 1 316 Stainless Steel ASTM A351CF8M 3 Seat Ring 1 316 Stainless Steel ASTM A351CF8M 4 Stem 1 316 Stainless Steel 5 Bonnet Bolt 1 304...

Dimanche 19 mai 2024

Constant pressure separating funnel is a type of separating funnel. Like other separators, it can perform operations such as separation and extraction. Unlike other separation funnels, a constant pressure separation funnel can ensure that the internal pressure remains constant. Firstly...

Dimanche 19 mai 2024

Prix : 17,55 €

Laissez-vous tenter par les merveilles culinaires avec la poêle Royalty Line PP42XXL : Party Pan, votre solution tout-en-un pour créer une myriade de plats délicieux. Que vous souhaitiez frire, griller, mijoter, préparer des paellas, des omelettes, des pizzas ou autres, ce réchaud...

Dimanche 19 mai 2024

Prix : 13,00 €

Partagez une délicieuse paella, fraîchement servie dans votre cuisine. Le Herzberg HG-7132PP est un moule à paella de 32 cm qui permet de servir jusqu'à 8 personnes. Cette poêle à paella est fabriquée en aluminium moulé sous pression durable et revêtue de marbre qui offre une...

Samedi 18 mai 2024

Hydrophilic Coated Guidewire Shun Ski Trails total length 150cm/180cm/260cm, diameter 0.032in/0.035in/0.038in (0.035in and 0.038in are common used), staight (shapable) or angled tip available package: 5 pcs/inner box, 100 pcs/outer carton PTFE coated Guidewire Shun Skyline used for...

Samedi 18 mai 2024

Used for cleaning 20 * 20mm and 15 * 20mm wafers, can be placed in reaction containers such as flasks for reaction. The size of the wafer holder can be customized according to the size of the flask mouth. Mainly used for silicon wafer pre treatment in industries such as semiconductors...

Samedi 18 mai 2024

Mainly used in industries such as semiconductors, polysilicon, new energy, new materials, solar energy, etc., it plays an important role in chemical laboratories and the processing of solar silicon wafers. Features: High temperature and low temperature resistance: PTFE flower baskets...

Vendredi 17 mai 2024

1. Wet digestion treatment plan for lithium batteries: determination of nickel cobalt lithium material (determination of nickel, cobalt, and manganese content in nickel cobalt manganese oxide lithium material for lithium-ion batteries) 2. Determination of matrix metal impurities in...

Vendredi 17 mai 2024

Advantages: 1.Material Selection: The inner vessels are crafted using modified polytetrafluoroethylene (TFM), PFA, and PTFE materials, ensuring superior chemical resistance and durability. This choice of materials guarantees a low background value and enhanced performance. 2.Purity...

Jeudi 16 mai 2024

Quantité : 1 Piece/Pi - Prix : estimated by custome

Les détails sur le moule: Nom de l'article Pièces de rechange de moules d'injection pour le shell / partie de Produits électroniques base de moule American Standard: ASTMB85-96, ASTMB85-98, ASTMB179-96, ASTMB597-98. Standard japonais: JISH2118: 2000, JISH5302: 2000. Norme...

Jeudi 16 mai 2024

Quantité : 1 Piece/Pi - Prix : estimated by custome

caractéristiques pièces de rechange de pièces électriques moulage par injection plastique (OEM) 1.specialize dans le moule de haute précision pour plusieurs années Prix 2.average 3.OEM disponibles nom pièces de rechange de pièces électriques moulage par injection plastique...

Jeudi 16 mai 2024

Product Description: PTFE cables have outstanding Mechanical & electrical properties, they are used in many situations,where temperatures are of + 180℃ and above or where temperatures are below Minus 40℃.In most adverse uses, where chemical fumes and liquids would render all...

Jeudi 16 mai 2024

Quantité : 150 pcs/mo - Prix : 500 USD/pcs

Les vannes papillon haute performance de FREE-VALVE sont à double structure décalée et peuvent être utilisées pour le contrôle d'arrêt et d'étranglement. Elle est divisée en étanchéité dure à dure ou en étanchéité dure à molle avec deux structures selon le matériau de surface d'étanchéité...

Jeudi 16 mai 2024

Quantité : 1 Piece/Pi - Prix : estimated by custome

Emballage & livraison Détail d'emballage: Carton standard d'exportation avec palettes ou comme votre demande Cycle de livraison 7- journées de travail sur la base des pièces dont vous avez besoin caractéristiques pièces de haute précision d'usinage CNC équipements 1.Full Précision 2...

Jeudi 16 mai 2024

- Guidewire - PTCA Guidewire (workhorse) - - Shun S-benchmark Asahi Sion - tip load 0.7g, radiopacity length 3cm, total length 190cm/300cm， staight (shapable) or angled tip available - Shun R-benchmark: Terumo Runthough NS - tip load 0.6g/1g, radiopacity length 3cm, total length...

Jeudi 16 mai 2024

Quantité : 1000 - Prix : 38,00 €

Cuves de fluorimètre avec couvercle (Hauteur du corps = 45 mm) Cellule de fluorimètre à quartz BSDLAB avec spécifications du couvercle Dimensions extérieures (HxLxPmm) Longueur du trajet (mm) Largeur intérieure (mm) Volume (ml) 45x12,5x7,5 5 10 1,7 45x12,5x12,5 10 10 3,5 45x12,5x22...

Jeudi 16 mai 2024

Advantages: Excellent Corrosion Resistance: It is coated with Teflon, a high-quality anticorrosive material, making it resistant to strong acids and alkalis. This ensures long-term stable operation of the equipment. Fast Heating Speed: The anti-corrosive cast aluminum hotplate has...

Jeudi 16 mai 2024

The teflon series reaction bottle contains a PTFE filter ball and a threaded sealing design at the bottle mouth to ensure the sealing of the reaction vessel. Connect other reaction vessels through PFA conduits to form a hydrogen fluoride reaction device, and the PFA valve can control...

Jeudi 16 mai 2024

PFA three-neck flask, the middle neck and bottle body are integrally formed, which is not fragile and more durable. Resistant to strong acids and alkalis, the surface is smooth and does not adhere to samples. The main purpose: (1) Reactor between liquid and solid or liquid; (2) Assemble...

Mardi 14 mai 2024

1. Product introduction The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning...

Lundi 13 mai 2024

Quantité : 10000sets/ - Prix : Inquiry

Butterfly Valve: Worm gear wafter type butterfly valve, wom gear lugged butterfly valve, handle wafer butterfly valve, wafer metal seated butterfly valve, grooged end butterfly valve Wafer Type Butterfly Valve With Gear Operator Body: Cast iron, Ductile iron Disc: Ductile iron...

Dimanche 12 mai 2024

Can meet the low detection limit requirements of ICP-OES and ICP-MS and provide laboratory-grade ultrapure acid for demanding analysis applications. The main body of the equipment is made of high-purity PTFE and PFA, and the container in contact with the acid reagent is made of imported...

Dimanche 12 mai 2024

Advantages of PTFE pagoda joint: 1.Excellent Corrosion Resistance: The pagoda joint crafted from PTFE exhibits superb corrosion resistance, resisting almost all chemicals, including strong acids, bases, and various organic solvents. This ensures its durability and longevity in harsh environments...

Samedi 11 mai 2024

1. High temperature resistance: the working temperature is 260 ℃, and Teflon heat shrinkable pipe has excellent heat resistance. It can be used continuously between 240 ℃ and 260 ℃ for a short time, which can withstand high temperature to 300 ℃, and has remarkable thermal stability...

Vendredi 10 mai 2024

Quantité : Mini order - Prix : Bargaining

- Quick Details - - Standard or Nonstandard: Standard - Structure: Ball - Pressure: Medium Pressure - Power: Manual - Material: Stainless Steel - Temperature of Media: Normal Temperature - Media: Water - Port Size: 1/2"-56" - Place of Origin: Hebei, China (Mainland)...

Vendredi 10 mai 2024

Quantité : Mini order - Prix : Bargaining

- Quick Details - - Standard or Nonstandard: Standard - Structure: Ball - Pressure: Medium Pressure - Power: Manual - Material: Stainless Steel - Temperature of Media: Medium Temperature - Media: Water - Port Size: 1/2"-56" - Place of Origin: Hebei, China (Mainland)...

Vendredi 10 mai 2024

Quantité : Mini order - Prix : Bargaining

- Quick Details - - Standard or Nonstandard: Standard - Structure: Ball - Pressure: Medium Pressure - Power: Manual - Material: Stainless Steel - Temperature of Media: Medium Temperature - Media: Water - Port Size: 1/2"-56" - Place of Origin: Hebei, China (Mainland)...

Vendredi 10 mai 2024

Quantité : Mini order - Prix : Bargaining

- Quick Details - - Standard or Nonstandard: Standard - Structure: Ball - Pressure: High Pressure - Power: Manual - Material: Forged - Temperature of Media: High Temperature - Media: Water - Port Size: DN15-DN1400 - Place of Origin: Hebei, China (Mainland) - Model Number...

Vendredi 10 mai 2024

- JCMA36 SERIES SOLENOID DOSING PUMP - Up to 400 strokes per minute results in high resolution chemical feed, with the elimination of slug-feed effects. JCMA pumps are small,quiet, and lightweighted. The diaphragm is made up by PTFE, which is compativle with all kinds of chemicals...

Vendredi 10 mai 2024

Quantité : Mini 1 pie - Prix : Bargaining

Product Description Heating System DN400 Full Welded Ball Valve with Handle Gearing Box Pressure range ASME/ANSI Class 150 to 2500 Temperature range -29°F to413°F (-30°C TO 200°C) Body ASTM A350 Gr. LF-2(M) End connection ASTM A350 Gr. LF-2(M) Ball ASTM A694 Gr...

Vendredi 10 mai 2024

Can be matched with: PTFE stirring paddle, thermometer, condenser tube, heating jacket, air inlet, feeding port, discharge valve, etc. #reactor #reactionvessel #Petrochemical #Buchnerfunnel Mobile: +86-153 6614 0844 Wechat/Whatsapp: +86-153 6614 0844 Mail: ClairBZH@gmail.com Localisation : no...

Vendredi 10 mai 2024

It has excellent chemical resistance and can withstand strong acids and alkalis, such as nitric acid, aqua regia, etc. The position of the lower outlet valve and the liquid level gauge can be customized. High temperature resistance: -200 to +250℃. Both 30L and 50L can be customized...

Vendredi 10 mai 2024

Product advantage: 1.Chemical Resistance: PTFE laboratory barrels exhibit excellent chemical resistance to a wide range of acids, bases, solvents, and other chemicals. This ensures that the barrels can safely contain and store various laboratory chemicals without degrading or reacting...

Vendredi 10 mai 2024

Needle Punched Non Woven Needle Punching Machine The Needle Punched Non-woven Fabrics Production Line from RIFA is an advanced system designed for the production of high-quality non-woven fabrics. This line uses a needle punching process, which mechanically entangles fibers to create...

Jeudi 09 mai 2024

A variety of specifications are available, and external necks and valves can be customized as required. Below the device are connected a Buchner funnel, a filter bottle and other suction filtration devices. PTFE material is resistant to strong acids and alkalis and high temperatures...

Jeudi 09 mai 2024

The PTFE threaded cap can be customized with a variety of interfaces, and can be connected to joints, PFA conduits, separatory funnels, etc. to form a reaction device. PFA Jar is available in various specifications: 60, 90, 120, 150, 180, 240ml... 4,6L. #reactionbottle #PFAJar #digestionvessel...

Jeudi 09 mai 2024

CLEAN STEAM GENERATORS The prototype of the clean steam generator for humidification is a pure steam generation system in the pharmaceutical industry. In structural design, clean steam generator simplifies and weakens the complex steam water separation structure. Compact structure...

Mardi 30 avril 2024

Designed specifically for digesting refractory geological samples, the material of the Inner cup can be selected from TFM or PTFE. The maximum pressure can reach 5Mpa. Can be numbered . Mobile: +86-153 6614 0844 Wechat/Whatsapp: +86-153 6614 0844 Mail: ClairBZH@gmail.com Localisation : no...

Mardi 30 avril 2024

BBQ ptfe grill mat, also known as PTFE glass cloth, Teflon cloth or BBQ grill cooking sheet, uses high-quality glass fibre as the woven material. As for the production of this type of heat resistant Teflon tape, it is normally first woven into a glass fibre cloth substrate by plain weave...

Mardi 30 avril 2024

Hopelight is a heat resistant tape manufacturer integrating R&D, production, and sales. The main high heat resistant polyimide tapes include polyimide tape, polyester tape, copper tape, PTFE adhesive tape, aluminum foil tape, glass cloth tape, and so on. As a certain scale of...

Lundi 29 avril 2024

PTFE polytetrafluoroethylene barrel PTFE is also known as: tetrafluoroethylene, polytetrafluoroethylene, Teflon, F4, Teflon; the tetrafluoroethylene products produced by our unit do not add recycled materials and can be used for trace analysis, isotope detection, ICP-MS/OES/AAS Analysis...

Jeudi 25 avril 2024

Samples in reaction vessels such as beakers and reaction bottles can be extracted. The surface is smooth, does not adhere to samples, and is easy to clean. Resistant to strong acid and alkali, high temperature: -200~+260℃. #labware #tweezers #saoplepreparation #teflon Mobile: +86-153...

Mercredi 17 avril 2024

PP, PFA, glass, PTFE, etc. support customization, optional specifications . PTFE digestion tubes are available with a variety of reflux covers, and most other materials are threaded sealing covers. Mobile: +86-153 6614 0844 Wechat/Whatsapp: +86-153 6614 0844 Mail: ClairBZH@gmail.com...

Jeudi 11 avril 2024

HVAC SOLENOID VALVE Egret series hvac solenoid valve is an electromechanical valve, used to control the refrigerant or water autonomously and remotely in the air conditioning system. There's a solenoid coil on the top, which is used for controlling the valve by passingan electrical...

Mercredi 10 avril 2024

1.Unibody molding, no welding marks, will not break, no Reside. 2.Reservoir and capillary specifications are customizable. 3.Compatible PTFE filter elements sold separately. #teflon #icpms #geochemistry#labware Localisation : no.6 yinghua road qixia district nanjing city jiangsu province...

Mardi 09 avril 2024

The surface of the hotplate, column feet and power cord are all covered with Teflon coating to avoid exposed metal and are specially designed for clean laboratories. Can be used with PFA Vials custom heated via racks. #hotplate #Cleanlaboratory #ICPMS #geochemistry #PFAVials #Samplepreparation...

Lundi 08 avril 2024

Prix : 1-10usd

Sanping jcb seal kit come with several advantages, some of which include: 1. High-quality materials: The jcb hydraulic cylinder seal kits are made of high-quality materials like NBR, PU, and PTFE to ensure long-lasting durability and resistance to wear, temperature, and pressure. 2...

Mercredi 03 avril 2024

Quantité : 4000 squar - Prix : USD7.00 ~USD35.00 Pe

Non-metallic Gaskets Non Metallic Gasket Material refers to a broad category of different gasket materials that do not contain metal. These materials, which include rubber, silicone, graphite, and PTFE, are known for their flexibility, adaptability, and excellent sealing capabilities...

Samedi 30 mars 2024

Packson is a contract manufacturer specializing in CNC Milling, CNC Turning, CNC Drilling services in China. We are able to manufacture plastic machining pieces and CNC machining metal parts with various materials. POM, ABS, HDPE, Nylon, PLA, PC, PEEK, PMMA, PP , PTFE , etc. Full...

Vendredi 29 mars 2024

The RHJ Multi-Angle hdpe pipe fitting welding machine is a specialized machine used in the welding of multi-angle elbow fittings for . It is designed to provide accurate, efficient, and reliable welding of elbow fittings in a range of angles. The machine uses advanced technology and...

Vendredi 29 mars 2024

RHD Butt Welding Machine The RHD Butt Welding Machine is an advanced welding solution designed for joining two of the same material and size. Its automated butt fusion technology ensures that the welding process is carried out efficiently and accurately. The machine is suitable for...

Jeudi 28 mars 2024

Quantité : 1-1000 - Prix : 10-10 million

Intepure is a flexible and intuitive chromatography system for the rapid purification of milligram to gram scale chemical synthesis, natural products, peptides, fermentation drugs and other target products. The system can be fitted with pre-loaded columns of φ10-30mm and dynamic axial...

Mercredi 27 mars 2024

Easy to operate and easy to take; resistant to strong acids and alkalis (hydrofluoric acid, hydrochloric acid, aqua regia, etc.); resistant to high temperatures: -200~+250°C; the number and size of holes can be customized . #semiconductor #siliconwafercleaning #strongcorrosiveacid...

Mercredi 27 mars 2024

Female Luer to Barbed Adapters Female luer lock to barb connectors provide a convenient way to connect flexible tubing ID 1/16" to 1/4" with products that feature a male luer slip or luer lock end without the need for barbs or nuts, the material of medical grade PP ensure high purity...

Mercredi 27 mars 2024

PTFE Buchner funnel and filter bottle, the whole set is made of high-purity PTFE material with PTFE filter plate and filter paper #teflon #icpms #filtration Localisation : no.6 yinghua road qixia district nanjing city jiangsu province, xuzhuang ruanjianyuan, 232000 nanjing, Personne à contacter ...

Mercredi 27 mars 2024

The size of the bottle can be customized according to the 1: 1 ratio of ordinary plastic; it is made of high-purity polytetrafluoroethylene and is resistant to strong acids and alkali, -200~+260℃. #reactionbottle #centrifugebottle #laboratorybottle #samplepreparation Localisation : no...

Mercredi 27 mars 2024

KSS is a high heat stable PC additive. Equivalents to FR2025, EF-42. Description of KSS Potassium Diphenylsulfone Sulfonate 63316 43 8 Chemical Name Potassium 3-(phenylsulfonyl)benzenesulfonate Synonyms Potassium 3-(phenylsulphonyl)benzenesulphonate Equivalents FR2025; EF-42...

Jeudi 21 mars 2024

Pure white in appearance, made of high-purity PTFE material with low background value, used in semiconductor polysilicon and other industries, and resistant to strong corrosive solvents #semiconductor #wafer #teflon #acid cleaning Localisation : no.6 yinghua road qixia district nanjing...

Jeudi 21 mars 2024

The headspace sampling bottle made of PFA used in the new semiconductor material industry has low background value and good sealing. There is a PTFE composite silicone stopper in the bottle cap for convenient sampling. #geochemistry #isotope analysis #labware #samplebottle #pfavials...

Samedi 16 mars 2024

ULPA Filter Media ULPA (Ultra Low Air Filter) is on the basis of HEPA by further improving the filtration efficiency. It was defined to remove at least 99.999% of particle size in 0.12 μm diameter, or 99.9999% of 0.3μm diameter particles in some ways. Mingguan manufactures and...

Samedi 16 mars 2024

PTFE MEMBRANE FABRIC Depends on its unique characteristics, PTFE membrane fabric performs precise high filtration efficiency and excellent chemical resistance to meet rigorous requirements in different filtration system. We provide high quality ePTFE membrane laminated filtration...

Samedi 16 mars 2024

MICRO-NANO FIBER FABRIC Nanofiber filter media is composed of nano scale diameter fibers. Small size effect gives nano fibers excellent properties and finer diameter. With smaller pore size and higher porosity, nanofiber filter material can be widely used in many applications....

Jeudi 14 mars 2024

Quantité : 10-30sets - Prix : 1000-7000 usd

VJF series is an industrial dust collector with multi-motor power, large air volume, pulse jet cleaning, stability and reliability. It can meet the dust removal needs of multiple industries and wide range of processes. Designed with precision and reliability in mind, this VJF series...

Jeudi 14 mars 2024

Quantité : 10-30sets - Prix : 1000-7000 usd

VJFCB Series is an explosion-proof industrial dust collector with high negative pressure, pulse jet cleaning, stable and small footprint. It meets the explosion-proof requirements for the flammable and explosive dust environment. Engineered with precision and innovation, this series...

Jeudi 14 mars 2024

Quantité : 10-30sets - Prix : 1000-7000 usd

VFO Series is a central dust collection system. It has the characteristics of large air volume, stable structure and convenient cartridge installation and ejection mechanism. It is suitable to deal with the production and processing of a large amount of dust. Why Choose Villo's VFO...

Mardi 12 mars 2024

Outer Tank: Non-magnetic 304 stainless steel Inner Cup: TFM,PTFE Max Temperature: 230℃ Max Pressure: 5Mpa Various specifications: 5/10/15/20/ 25/30/50/60/100/150/200 etc. If you want to know more please leave a message or contact me. Claire Mobile: +86-153 6614 0844 Wechat/Whatsapp...

Mardi 12 mars 2024

Teflon coated magnets are known for their excellent chemical stability, corrosion resistance, friction resistance, and heat resistance, and have developed into world-class industrial coatings. Teflon materials have also been used in the surface treatment of magnetic materials, using...

Mardi 12 mars 2024

IEC Dummy Socket is designed by Jayuan Technology Department own. We learned some spirit from the existing Europe Standard EV Charging Socket, and make it easier to do every step that required. The core of Jayuan IEC Dummy Socket is SIMPLE. The iec 62196 socket can be well fit with...

Vendredi 08 mars 2024

Outer Tank: Non-magnetic 304 stainless steel Inner Cup: TFM,PTFE Max Temperature: 230℃ Max Pressure: 5Mpa Circular tongue-and-groove sealing design provides better sealing; a double-layer inner cup can be customized to isolate metal elements from penetrating; the surface can be sprayed...

Vendredi 08 mars 2024

1. Corrosion resistance 2. Low blank value of metal elements etc. 3.Strong transparency, can clearly observe the phase interface 4. High temperature and high pressure sterilization can be carried out 5. The cover and piston are leakproof and the piston device is easy to remove for...

Vendredi 08 mars 2024

1.Reproducible: PFA column can be used multiple times, greatly saving experimental costs. 2.Visibility: When separating colored samples, the PFA transparent column can visually see the separation ribbon sieve plate: sieve plates of various particle sizes can be provided, with excellent...

Vendredi 08 mars 2024

Outer Tank: Non-magnetic 304 stainless steel Inner Cup: TFM,PTFE Max Temperature: 230℃ Max Pressure: 5Mpa Circular tongue-and-groove sealing design provides better sealing; a double-layer inner cup can be customized to isolate metal elements from penetrating; the surface can be sprayed...

Jeudi 07 mars 2024

Extraordinary chemical resistance, can withstand aqua regia, hydrofluoric acid; resistant to high temperature and pressure, four-layer PFA material tray. Localisation : no.6 yinghua road qixia district nanjing city jiangsu province, xuzhuang ruanjianyuan, 232000 nanjing, Personne à contacter ...

Jeudi 07 mars 2024

Wafer Carrier is made from PTFE, able to resist strong acid, strong hydrofluoric acid, strong base and heat up to 200~250ºC, use to deliver wafers in acid & base process of Fabrication factory. Low profile design allows the greatest possible wafer exposure to increase cleaning...

Mercredi 06 mars 2024

PFA separatory funnel/soluble polytetrafluoroethylene separatory funnel/Teflon plastic separatory funnel use: 1. Used for solid-liquid or liquid-liquid reaction experiments to control the amount of liquid added and the reaction rate. 2. Material separation and purification: Separate...

Mercredi 06 mars 2024

1.Temperature resistant, -200~+260℃（-328℉~+500℉） 2.Well sealed 3.Chemical inert, withstand virtually all chemical solvents. 4.No dissolution or precipitation. 5.non-stick, easy to clean. PFA sample tanks and vials with threaded closures designed primarily for storage of samples. Molded...

Mercredi 06 mars 2024

1.high-purity experimental grade TFM, no added back material, guaranteed purity, lower blank value 2.high smoothness of the inner wall of the microwave tank, correct size, suitable for use by various labs and models of microwave digestion instruments 3.Data assurance: high quality...

Mercredi 06 mars 2024

Quantité : 10000pcs/p - Prix : 20USD--

CNC Turning CNC Turning is also called cnc lathing. The high quality China CNC turning is a manufacturing process in which bars of workpiece are held in place and rotated by the main spindle while a cutting tool is fed to cut the material to create the shape and size as per the drawing's...

Mercredi 06 mars 2024

Quantité : 10000pcs/p - Prix : 20USD--

CNC Machining PEEK YS RAPID is a professional peek cnc machining manufacturer, peek cnc machining supplier in China. With more than ten years of CNC machining experience, we provide high-quality PEEK material machining services including glass filled china peek cnc machining service...

Mardi 05 mars 2024

PEEK-FC series modified by PTFE, graphite and carbon fiber have lower friction coefficient, wear resistance and self-lubrication than pure resin G. Types of Grade FC Super Wear Resistant PEEK ZYPEEK Supplier FC Series-330FC30 PEEK Super Wear Resistant FC Series-770FC30/770FE20/770FE20H...

Vendredi 01 mars 2024

Quantité : 700 tons/y - Prix : $4-10/kg

Polytetrafluoroethylene sheets are made from polytetrafluoroethylene, a synthetic fluoropolymer of tetrafluoroethylene that has remarkable chemical resistance. PTFE sheet/ plate is known for its low coefficient of friction, high impact resistance, and high-temperature resistance....

Vendredi 01 mars 2024

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE sealing products are made of polytetrafluoroethylene (PTFE) material that is known for its unique combination of properties, such as high chemical resistance, low coefficient of friction, and temperature resistance. PTFE sealers are widely used to create leak-proof seals with...

Vendredi 01 mars 2024

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE (polytetrafluoroethylene) rods/bars are widely used in industries such as engineering, electronics, and chemical processing, where their exceptional durability, non-stick properties, and ability to withstand harsh environments make them highly sought-after materials. Types of...

Vendredi 01 mars 2024

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE Ring PTFE sealing products not only can seal oil fluid, can also seal water a class of fluids, including strong acid, strong alkali, strong corrosion strong chemical fluids and a variety of solvents, it can also seal a variety of gases, to adapt to dry friction occasions. None...

Vendredi 01 mars 2024

Quantité : 700 tons/y - Prix : $4-10/kg

As one of the professional PTFE products manufacturers, Jiangsu Xinrui Plastic Technology specializes in manufacturing polytetrafluoroethylene products, including tubes, sheets, rods, gaskets, and film. These PTFE products have excellent chemical and heat resistance, low friction...

Vendredi 01 mars 2024

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE Molded Tube PTFE rods and tubes are sintered with PTFE suspension resin after moulding or hydraulic pressing, or extruded with PTFE presintered disperse resin by plunger. PTFE is commonly known as the king of plastics. The PTFE product has many excellent features. As a professional...

Vendredi 01 mars 2024

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE Molded Sheet PTFE is divided into molded plate and turning plate two categories. The molded plate is made of PTFE suspension resin by molding and sintering; Turning plate is the blank of PTFE suspension resin formed by molding or hydraulic method and then turning or rotary cutting...

Vendredi 01 mars 2024

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE Molded Rods In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic components protection and other aspects. Because PTFE molded rod has good high temperature resistance and corrosion resistance, it can improve...

Vendredi 01 mars 2024

1. Split design, Teflon coating, PTFE feet, PFA casing. 2. Better thermal conductivity and higher heating efficiency. 3. The heating plate area, plate thickness, column foot height, hole diameter, hole depth, and hole number can be customized, and it is suitable for various laboratory...

Mardi 27 février 2024

1. Translucent; 2. Temperature resistance range: -200°C~260℃. 3. Chemical inert, withstand virtually all chemical solvents. 4. Anti-pollution: low blank value of metal elements. 5. Non dissolution and precipitation: good vessel for storing standard substances,highly corrosive, ultrapure reagents...

Mardi 27 février 2024

1. Can purify almost all kinds of acid, the acid purification effect is ideal. 2. Unique design to prevent dry burning and will protect itself after steaming dry. 3. Whole purification barrel is made of ultra-pure PTFE material. 4. The entire purification process is carried out in...

Lundi 26 février 2024

1.Reproducible: PFA column can be used multiple times, greatly saving experimental costs. 2.Visibility: When separating colored samples, the PFA transparent column can visually see the separation ribbon sieve plate: sieve plates of various particle sizes can be provided, with excellent...

Lundi 26 février 2024

Graphite digestion instrument is an economical and easy-to-operate sample pretreatment equipment and provides convenient and efficient digestion. 1.Faster heat conduction,more uniform heating. 2.Fully enclosed frame design,lower loss and less corrosion. 3.Separate,digital temperature controller...

Samedi 24 février 2024

1.Chemically resistant 2. Low blank value of metal elements etc. 3. Heat resistant and usable to cryogenic temperatures 4.· Ideal for storing digestion samples 5. The inner wall is smooth and easy to clean If you are planning to purchase experimental vessels made of PFA, PTFE, FEP...

Samedi 24 février 2024

1.Made from ultra-pure PTFE resin 2.Used for shipping cleaning and storage of those silicon wafer glass and so on 3.Can underbear within -200 to 250ºC 4.Corrosion resistance (Strong acid, strong hydrofluoric acid, strong base resistant) 5. Inert to chemicals， for acid or base process 6...

Vendredi 23 février 2024

1. Heating efficiency is higher and heating is more uniform. 2. Less reagent consumption. 3. The metal blank value is low. 4. More energy-saving and efficient. 5.Customized samples: various microwave digestion tanks can be customized according to customer requirements. If you are...

Vendredi 23 février 2024

1.No cooling water is required and all wetted parts are molded PFA. 2.Graduated front fill tube shows acid level remaining. 3.Digital temperature controller with auto shutoff and segment timing temperature control. 4.The temperature controller is located away from the equipment, allowing...

Jeudi 22 février 2024

Egret series HVAC solenoid valve is an electromechanical valve, used to control the refrigerant or water autonomously and remotely in the air conditioning system. There's a solenoid coil on the top, which is used for controlling the valve by passing an electrical current thru it. In the meantime...

Jeudi 22 février 2024

Egret fiberglass tape adopts fiberglass or glass fiber as the backing material. Fiberglass is a type of fiber-reinforced plastic using glass fiber. The fibers can be randomly arranged or woven into glass cloth. One of the fiberglass tapes is called filament tape. Its backing material...

Mercredi 21 février 2024

1.Self-locking structure,explosion-proof microwave screen door, more secure 2.Double magnetron continuous microwave emission technology,the top microwave emission ensures temperature uniformity. 3.7-inch super large color touch screen controller,available to edit,modify and store...

Mercredi 21 février 2024

1.high-purity experimental grade TFM, no added back material, guaranteed purity, lower blank value 2.high smoothness of the inner wall of the microwave tank, correct size, suitable for use by various labs and models of microwave digestion instruments 3.Data assurance: high quality...

Mercredi 21 février 2024

Heat exchanger gasket types are crucial for maintaining the integrity of the heat exchanger system, preventing cross-contamination and optimizing heat transfer efficiency. Regular inspection and replacement of gaskets is necessary to ensure reliable and safe operation of heat exchangers...

Mardi 20 février 2024

1.Made from high-purity PTFE resin 2.Used for shipping cleaning and storage of those silicon wafer glass and so on 3.Smooth surface and translucent 4.Can underbear within -200 to 250ºC 5.Corrosion resistance (Strong acid, strong hydrofluoric acid, strong base resistant) 6. Inert to...

Mardi 20 février 2024

1.Temperature resistant, -200~+260℃（-328℉~+500℉） 2.Well sealed 3.Chemical inert, withstand virtually all chemical solvents. 4.No dissolution or precipitation. 5.non-stick, easy to clean. PFA sample tanks and vials with threaded closures designed primarily for storage of samples. Molded...

Mardi 20 février 2024

PFA separatory funnel/soluble polytetrafluoroethylene separatory funnel/Teflon plastic separatory funnel use: 1. Used for solid-liquid or liquid-liquid reaction experiments to control the amount of liquid added and the reaction rate. 2. Material separation and purification: Separate...

Mardi 20 février 2024

Quantité : 2000pcs

Engineering custom plastic extrusion profiles are made from several technical polymers, each of which has special qualities including high elasticity, high wear and tear resistance, and great chemical resistance. Together with these qualities, the material manufactured by plastic...

Lundi 19 février 2024

The three-way ball valve has T-type and L-type. The T-type can make three orthogonal pipelines interconnected and cut off the third channel, from diversion, and flow. L Three-way ball valve type can only connect two pipelines orthogonal, and cannot maintain the mutual communication...