AUTOMOTIVE - 3594 Annonces

Sunday 28 February 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Wednesday 24 February 2016

Thickness 0.05mm, 0.06mm, 0.1mm Width 250mm, 300mm, 500mm Length maximum 100m PET thickness 0.05mm, 0.1mm Application Structure Type Mono-film Double membrane PET composite membrane Structure silicone rubber membrane silicone rubber membrane protective membrane ...

Wednesday 24 February 2016

Appearance White Paste 200~300(1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0(%) (200℃, 8h) Volatile ≤1.0(%)(200℃, 8h) Breakdown Voltage Strength ≥10(kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2(w/m.k) 1 kg/tank, 10kg/barrel, 80g/branch...

Tuesday 12 January 2016

Kontec Precision Industrial Co., Ltd. as one Taiwanese Green Company and with the raising global environment awareness, KONTEC's concept is to fulfill corporate social responsibility. Also, with more than 25 years of professional manufacturing Drill EDM, Kontec steadily provides...

Friday 01 January 2016

430 Stainless Steel Grade: 400 Series Stainless Steel Type: Stainless Steel Plate,Stainless Steel Pipe/Tube, Stainless Steel Coil Standard: ASTM A240 Specification: Thickness: 0.3mm-100mm||||||Width: 200-3000mm Application: Industrial and commercial applications range from interior...

Wednesday 23 December 2015

SA179 Seamless Pipe is Quality carbon structural steel low-pressure boiler seamless steel tubes for the manufacture of various structural low and medium pressure boiler superheated steam , boiling water and superheated steam locomotive boiler tubes, opium pipe, small pipe and brick...

Wednesday 23 December 2015

A179 Seamless Pipe is Quality carbon structural steel low-pressure boiler seamless steel tubes for the manufacture of various structural low and medium pressure boiler superheated steam , boiling water and superheated steam locomotive boiler tubes, opium pipe, small pipe and brick...

Wednesday 23 December 2015

A53 Gr.A is General purpose seamless steel pipe ,covers seamless and welded black and hot-dipped galvanized steel pipe in NPS1/8 to NPS26(DN6-DN650),inclusive ,with nominal wall thickness. Hot-rolled state or heat treatment delivery. Type: PipeTube Standard: ASTM A53 A53 Gr.A...

Tuesday 22 December 2015

Applications This PVC insulated single-core unshielded low-tension wire is used for automobiles. Construction Conductor Cu-ETP1 bare according to DIN EN 13602 Insulation PVC Standard Compliance ISO 6722 Class B Special Properties Conductors >6mm² are suitable for...

Thursday 17 December 2015

Quantité : 20MT - Prix : USD900/MT

MICVIN produit principal TECHNIQUE Forte d'emballage approprié pour le transport longue distance océan / air et l'intérieur des terres Une excellente intégrité du brin, densité apparente élevée La capacité d'écoulement supérieure dans l'utilisation et le contrôle facile à sec...

Thursday 17 December 2015

Specifications of dc05 cold rolled steel coil : 1) Capacity: about 15000 tons per month for the steel sheet and coil product 2) Grade: SGCC, DX51D, Q195, all according to the customer's request 3) Standard: JIS G3302 1998, ASTM A653M/A924M 2004, all according to the customer's...

Saturday 12 December 2015

Quantité : 5000pcs/mo - Prix : $15/pc

Customized Sand Casting Fitness Equipment Flywheel with Machining A. Sodium silicate sand casting. B. Cast Iron. C. Weight: Upto 7000KG. D. Pump body, impeller, etc. E. Hydraulic test, and other necessary inspections available. 1) molding process: Resin sand/Green Sand 2) Material...

Saturday 12 December 2015

Quantité : 5000pcs/mo - Prix : $15/pc

Customized Cast Iron Sand Casting Flywheel for Exercise Bike 1. Ductile Iron Castings: Molding process: Resin sand/Green Sand Material: EN-GJS-400-15/EN-GJS-500-7/EN-GJS-600-3/ EN-GJS-700-2 Molding: Hand molding/Molding machine Z145/146/148/Molding line. Possible Heat Treatment...

Saturday 12 December 2015

Quantité : 5000pcs/mo - Prix : $15/pc

Customized Sand Casting Fitness Equipment Flywheel with Machining A. Sodium silicate sand casting. B. Cast Iron. C. Weight: Upto 7000KG. D. Pump body, impeller, etc. E. Hydraulic test, and other necessary inspections available. 1) molding process: Resin sand/Green Sand 2) Material...

Wednesday 09 December 2015

Type SUS304L is an extra low-carbon variation of Type SUS304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding.It has slightly lower mechanical properties than Type SUS304. Grade: 300 Series Steel Type: Plate, Pipe/Tube, Coil Standard: ASTM A240...

Wednesday 09 December 2015

stainless plate grade 430 is a non-hardenable steel containing straight chromium, and belongs to the ferritic group of steels. Grade: 400 Series Steel Type: Plate, Pipe/Tube, Coil Standard: ASTM A240 Steel Plate Specification: Thickness: 0.3mm-100mm, Width: 200-3000mm. Place of Origin...

Wednesday 09 December 2015

Type 410 is a martensitic stainless plate that provides good corrosion resistance plus high strength and hardness. Grade: 400 Series Type: Plate, Pipe/Tube, Coil Standard: ASTM A240 Steel Plate Specification: Thickness: 0.3mm-100mm, Width: 200-3000mm. Place of Origin: Henan...

Wednesday 09 December 2015

409 stainless is superior to Type 410 stainless plate because welding does not greatly impair the corrosion resistance of weld areas prone to chromium carbide sensitization. Grade: 400 Series Type: Plate, Pipe/Tube, Coil Standard: ASTM A240 Steel Plate Specification: Thickness: 0...

Wednesday 09 December 2015

Type 304L is an extra low-carbon variation of Type 304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding.It has slightly lower mechanical properties than Type 304. Grade: 300 Series Type: Plate, Pipe/Tube, Coil Standard: ASTM A240, JIS G4350...

Wednesday 09 December 2015

Type 304L is an extra low-carbon variation of Type 304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding.It has slightly lower mechanical properties than Type 304. Grade: 300 Series Type: Plate, Pipe/Tube, Coil Standard: ASTM A240, JIS G4350...

Tuesday 08 December 2015

Expanded Metal Mesh for car grille mesh Introduction Expanded metal is a metal sheet with openings in the area. They are formed by cuts in the transverse direction and at the same time stretching in length without loss of material。 In automotive engineering, a grille, covering...

Tuesday 08 December 2015

Introduction Perforated metal is strong, lightweight, and appealing. It widely used in the automotive industry.Pe rforated metal components have to be tough to keep air, rocks and debris out of the engine, radiator , and exhaust systems. Size & Configurations Plate thickness from 0...

Tuesday 08 December 2015

Woven wire mesh for EMI RFI shielding Introduction Whether in the electronics industry,architecture,aerospace,or automotive, electromagnetic shielding is an problem of increasing significance. The stainless steel wire mesh will provide high frequency shielding performance. Stainless...

Sunday 06 December 2015

Quantité : 100 - Prix : 1,00 €

Oscillatory Abrasion Tester Testing Standards: ASTM D4157 Applications: Oscillatory Abrasion Tester is used to determine the abrasion resistance of fabrics when rubbed against a standard abradant or a wire mesh screen with a backward and forward motion over a curved surface. Particularly...

Saturday 21 November 2015

Quantité : no limit - Prix : on application

UPRNS series mold type ultra high stable resistor networks is both standard and customer oriented networks, can be made according to each special design and request, with ultra low TCR of ¡À1ppm/¡æ and ultra high accuracy of ¡À0.01%, is really the perfect choice to the manufacturers...

Saturday 21 November 2015

Quantité : no limit - Prix : on application

UPRNS series mold type ultra high stable resistor networks is both standard and customer oriented networks, can be made according to each special design and request, with ultra low TCR of ¡À1ppm/¡æ and ultra high accuracy of ¡À0.01%, is really the perfect choice to the manufacturers...

Saturday 21 November 2015

Quantité : no limit - Prix : on application

UPRNS series mold type ultra high stable resistor networks is both standard and customer oriented networks, can be made according to each special design and request, with ultra low TCR of ¡À1ppm/¡æ and ultra high accuracy of ¡À0.01%, is really the perfect choice to the manufacturers...

Friday 20 November 2015

Easy plug and play installation Reduce Glare when Driving at Night 2 Year limited lifetime Warranty OSRAM LED Chip Military grade Free Custom Inner Bezel Color No Product Return For Three consecutive years Premium performance high-output LEDs Surpasses DOT & Transport...

Friday 20 November 2015

Quantité : 1000 - Prix : USD0.1-USD2.0

Material: Plastic (PA, PP, PC, ABS, PET, TPU/V, Silicone etc.) Process: Injection molding, over molding etc Surface Finish: Mold Tech Texture, Mirror Polish, High Polish and so on. For used in: Medical, Automotive, Home Appliance, Electronic and so on. Mould base: LKM, HASCO ect...

Wednesday 11 November 2015

Quantité : rmb - Prix : 100,00 €

Shandong Renfeng Special Materials Co., Ltd positioning in the production, R&D and sales of high-end filter media in china. It has fixed assets of 600,000,000RMB a nd more than 500 staffs. The company invested 2 production lines for automotive filter paper and 2 impregnation lines...