GALVANOMETER - 98 Annonces

Chine (Rép. pop) 518000 Pro / B2B
VCM F1

Vendredi 02 septembre 2022

VCM F1 adopts the traditional voice coil motor design scheme, linear motor structure is simple, high stability. Using high precision grating ruler as position feedback, position resolution accuracy is 25 bits. Digital encoder technology greatly improves positioning accuracy, in addition...

Chine (Rép. pop) 518000 Pro / B2B
Galvo Scanner

Vendredi 02 septembre 2022

The single-axis galvo motor system contains a high-precision sensor and a motor part based on moving magnet technology. The motor rotor is optimized for excellent dynamic properties and response characteristics. In addition, the motor features high rigidity and low friction. Moreover...

Chine (Rép. pop) 518000 Pro / B2B
Extra-galvo Scanner

Vendredi 02 septembre 2022

Compared with the photoelectric analog galvanometer, the installation of the grating requires a larger space, so the encoder part at the bottom of the grating digital galvanometer is higher than that of the photoelectric analog galvanometer. The grating digital galvanometer is more...

Chine (Rép. pop) 518000 Pro / B2B
Digital Galvo Driver

Vendredi 02 septembre 2022

Hansscanner digital driver board can drive the full range of Han's Scanner photoelectric galvanometer motor and grating galvanometer motor, one driver board can drive two galvanometer motors at the same time. Support a variety of digital communication protocols; supports state output...

Chine (Rép. pop) 518000 Pro / B2B
Analog Galvo Driver

Vendredi 02 septembre 2022

Han's galvo scanning system analog galvo driver board is designed for the full series of Han's Scanner photoelectric galvanometer motor, using the traditional PID closed-loop control mode, stable and reliable performance; with a variety of different configurations, support analog...

Chine (Rép. pop) 210007 Divers
F-theta Lenses

Jeudi 18 août 2022

The F-theta scanning lenses are commonly used in laser scanning systems that employ two-axis galvanometers to scan a specified area but cannot tolerate the angle at the image plane. By introducing a specified amount of barrel distortion in a scanning lens, thetelecentric f theta lens...

Hyperion Optics

  • CMLopez
  • 210007 - nanjing
  • +86 25 86626311
Chine (Rép. pop) 518000 Pro / B2B
5-axis Laser Micromachining System

Samedi 09 juillet 2022

5-axis Laser Micromachining System The ordinary precession drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processing. Besides the standard straight hole and the taper hole processing, the 5-axis laser micro machining...

Chine (Rép. pop) 518000 Pro / B2B
5-axis Laser Micromachining System

Samedi 09 juillet 2022

The ordinary laser drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processing. Besides the standard straight hole and the taper hole processing, the 5-axis laser micro machining system can also process the inverted cone hole...

Chine (Rép. pop) 518000 Pro / B2B
4-axis Large Field Processing System

Samedi 09 juillet 2022

The four-axis linkage system is mainly composed of XY galvanometers, XY motion platform, platform driver, GMC control card and general marking software. It has the function of unlimited field of vision, synchronize the linear servo shaft and laser scanning galvanometer. When the high...

Chine (Rép. pop) 518000 Pro / B2B
3d Large Field Size Dynamics Focusing System

Samedi 09 juillet 2022

The 3d dynamic focusing system mainly consists of XY galvo, dynamic focusing module, control card and upper computer software. By changing the position of the dynamic focusing mirror, its focus is still on the surface of the workpiece, so as to achieve the effect of the same diameter...

Chine (Rép. pop) 518000 Pro / B2B
3-axis Galvo Scan Head

Samedi 09 juillet 2022

The large-format 3D laser scanner head is free of the processing range limits of 2D field lenses, and can be flexibly selected 100x100mm-2000x2000mm. Package type three axis galvanometer, eliminate customer Z axis optical path debugging, easy installation and adjustment. According...

Chine (Rép. pop) 518000 Pro / B2B
2-axis Galvo Scan Head

Samedi 09 juillet 2022

Excellent driver board and galvanometer matching to achieve superior speed performance, reduce the first stroke of a character and corner burning phenomenon, strict mirror quality, ensure the requirements of mirror flatness and damage threshold. The galvo scan head produced by Han's...

Chine (Rép. pop) 518000 Pro / B2B
Laser Scanning System From Han's Scanner

Samedi 09 juillet 2022

Han's Scanner focuses on scanning galvanometer system solutions. Our products include Ultragalvo photoelectric scanning galvanometer, Extragalvo grating scanning galvanometer, 3D scanning galvanometer, etc., focusing on galvanometer and motion control system solutions, existing four-axis...

Chine (Rép. pop) 518000 Artisanat
Laser Marking Card

Vendredi 08 avril 2022

GMC control card supports XY2-100, SPI and other galvanometer communication protocols, Ethernet communication, easy to expand the multi-control card synchronization control. High precision tri-axial correction algorithm ensures large area machining accuracy. Skywriting guarantees...

Chine (Rép. pop) 518000 Destockage
Laser Lens

Vendredi 08 avril 2022

Common Fθ lens is a series of general lens used in laser fields. The common F-theta lens has developed into the 3th generation product after experiencing continuous improvement of Optical Component Center. The materials of the 3th generation product all belong to world-class domestic...

Chine (Rép. pop) 518000 Recherche / Achat
Laser Control Card

Vendredi 08 avril 2022

GMC is a galvanometer motion control card independently developed by Shenzhen Han's Scanner S&T Co., LTD. GMC galvo control card embedded software architecture, powerful performance, rich integration functions. Flexible laser control interface, support a variety of common laser control...

Chine (Rép. pop) 518000 Destockage
High Speed 3d & 2.5d Scanning System 14mm

Vendredi 08 avril 2022

The 2.5D&3D system has the function of conventional 2D galvanometer, and a zoom module is added on the basis of the conventional galvanometer, which solves the problem that the traditional laser scanning galvanometer can only realize plane scanning and small range scanning, and...

Chine (Rép. pop) 518000 Matériels occasions
High Power Galvanometer Welding System

Vendredi 08 avril 2022

High power galvo laser welding system is independently developed by Han's Scanner. The system after fully validated, with carefully designed double wind cooling water circulation system and excellent whole sealing, strict selection and testing of optical element, the assembly process...

Chine (Rép. pop) 518000 Habillement / Mode
VCM Z

Vendredi 08 avril 2022

The traditional Z-axis focusing module adopts voice coil motor or galvanometer structure, which has high load quality, slow response time and low dynamic performance. VCM Z-axis focusing module breaks through the traditional perspective optical path design scheme and greatly improves...

Chine (Rép. pop) 518000 Véhicule
VCM G2

Vendredi 08 avril 2022

VCM G2 adopts full digital galvanometer driver, digital driver board of basic FPGA, stable performance, not easy to be disturbed, flexible to use, easy to debug. Modular design, easy to assemble. According to customer requirements, we can choose lenses with different aperture, high...

Chine (Rép. pop) 210007 Pro / B2B
F-theta Lenses

Jeudi 19 août 2021

The F-theta scanning lenses are commonly used in laser scanning systems that employ two-axis galvanometers to scan a specified area but cannot tolerate the angle at the image plane. By introducing a specified amount of barrel distortion in a scanning lens, the f theta scan lens becomes...

Hyperion Optics

  • CMLopez
  • 210007 - nanjing
  • +86 25 86626311
Chine (Rép. pop) 210007 Divers
F-theta Lenses

Vendredi 29 mai 2020

Quantité : 1pcs - Prix : 40-200usd

The f theta scan lens are commonly used in laser scanning systems that employ two-axis galvanometers to scan a specified area but cannot tolerate the angle at the image plane. By introducing a specified amount of barrel distortion in a scanning lens, the F-Theta scanning lens becomes...

Hyperion Optics

  • CMLopez
  • 210007 - nanjing
  • +86 25 86626311
Chine (Rép. pop) 518000 Biens d'équipement
Laser Galvo Mirrors

Dimanche 31 mars 2019

The scanning mirror is light weight rectangular mirrors that used for high speed two-axis laser scanning system. The dimensions for each mirror have been calculated accordingly with the laser beam size. The mirror has high reflectivity of 99.5% or above. The scanning mirror usually...

Shenzhen Suntec Laser Technology Co., Ltd.

  • 518000 - shenzhen
  • 0755 23572117
Chine (Rép. pop) 250000 Biens d'équipement
Machine de marquage laser à fibre

Mercredi 13 décembre 2017

Quantité : 1 set - Prix : 4100usd

CNC laser marking machine / fiber laser marking machine price JPF20W for jewelry metal auto parts watches camera Parameter of fiber laser marking machine: NO Model JPF-20W 1 Laser power Fiber 20W 2 Working area 110*110mm 3 Laser Wavelength 1064nm 4 Response time 0...

jinan precision CNC Machinery co.,ltd

  • 250000 - jinan city
  • 0086 53188988930
Chine (Rép. pop) 215313 Biens d'équipement
Fiber Laser Marking Machine

Samedi 29 juillet 2017

Quantité : 1pcs - Prix : 2000~4000USD

Fiber laser marking machine is our company using the newest generation of laser marking system in the world's most advanced laser technology. Using fiber laser output laser, and then by high-speed scanning galvanometer system to achieve marking function. Fiber laser marking machine...

Kunshan Daxinhua Laser Technology Co.,Ltd.

  • DXH Laser
  • 215310 - Zhoushi Town
  • 0086 523 87689288
  • 0086 13228790971
Chine (Rép. pop) 215600 Biens d'équipement
Concavity surface laser engraving system

Vendredi 12 août 2016

- Products application - The main products of FEELTEK includes 3 axis systems in C serial and F serial,wide field laser marking system , 3D surface &relief engraving system, laser pattern marking on moving walk piece based on visual position system, laser manufacturer by adding...

Suzhou Feeltek Laser Technology CO.Ltd

  • feeltek
  • 215600 - Zhangjiagang
  • 0086 512 58190999
Chine (Rép. pop) 523000 Biens d'équipement
MF10-E economic type fiber laser marking machine

Dimanche 05 juillet 2015

MF10-E economic type fiber laser marking machine MF10-E dazu-yueming laser Polytron Technologies Inc (hereinafter referred to as the Han's Yueming) a new generation of economic type optical fiber laser launched marking machine. The marking machine based on the domestic market, configuration...

GD Han's YueMing Laser Technology Co., Ltd

  • 523000 - Dongguan
  • +86 769 22705851/89838888
  • +86 13790421847
Chine (Rép. pop) 523000 Biens d'équipement
DDB100 Treble Axes Dynamic Focusing Marking Machine

Dimanche 05 juillet 2015

DDB100 Treble Axes Dynamic Focusing Marking Machine Features 1. Fully enclosed optic system doesn't need adjustment and is maintenance-free. ymhqy2015 2. Original imported RF laser enjoys high power and good beam quality, stable power output and long lifetime. 3. Three-axis laser...

GD Han's YueMing Laser Technology Co., Ltd

  • 523000 - Dongguan
  • +86 769 22705851/89838888
  • +86 13790421847
Chine (Rép. pop) 523000 Biens d'équipement
DDB150 Treble Axes Dynamic Focusing Marking Machine

Dimanche 05 juillet 2015

DDB150 Treble Axes Dynamic Focusing Marking Machine Technical indicators: Laser power 60w/100w/150w Wavelength 1064nm Work area 400mm*400mm 500mm*500mm 600mm*600mm Supply voltage AC220V±10% Speed 7000mm/s Cooling method water Weight depend on configuration...

GD Han's YueMing Laser Technology Co., Ltd

  • 523000 - Dongguan
  • +86 769 22705851/89838888
  • +86 13790421847
Chine (Rép. pop) 523000 Biens d'équipement
MUV5-B-A UV Laser Marker

Dimanche 05 juillet 2015

MUV5-B-A UV Laser Marker MUV5-B-A UV laser marker adopts superior performance imported ultraviolet laser generator and digital high-speed scanning galvanometer, reliable quality; high quality laser beam, extremely small focused spot, which can realize ultra-fine laser marking; it's...

GD Han's YueMing Laser Technology Co., Ltd

  • 523000 - Dongguan
  • +86 769 22705851/89838888
  • +86 13790421847
Nombre de résultats par page : 6 30 150

Rechercher GALVANOMETER