INTERNALS - 4222 Annonces

Saturday 19 March 2016

Quantité : 8000 - Prix : $3.4

The CC2640 device is a wireless MCU targeting BluetoothSmart applications. The device is a member of the CC26xx family of cost-effective, ultralow power, 2.4-GHz RF devices. Very low active RF and MCU current and low-power mode current consumption provide excellent battery lifetime...

Saturday 19 March 2016

Quantité : 7000 - Prix : $1.13

The MSP430G2x52 and MSP430G2x12 series of microcontrollers are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, and up to 16 I/O capacitive-touch enabled pins and built-in communication capability using the universal serial communication interface and have...

Saturday 19 March 2016

Quantité : 6000 - Prix : $1.15

The MSP430AFE2x3 devices are ultra-low-power mixed signal microcontrollers integrating three independent 24-bit sigma-delta A/D converters, one 16-bit timer, one 16-bit hardware multiplier, USART communication interface, watchdog timer, and 11 I/O pins. The MSP430AFE2x2 devices...

Saturday 19 March 2016

Quantité : 6000 - Prix : $0.5

The MSP430G2x32 and MSP430G2x02 series of microcontrollers are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, and up to 16 I/O capacitive-touch enabled pins and built-in communication capability using the universal serial communication interface. The MSP430G2x32...

Saturday 19 March 2016

Quantité : 10000 - Prix : US$1.15

nRF24L01P-PA/with PINS/ Internal Antenna new in original in stock!Action Dynamic Unit Price: USD 1.15 new in original in stock 2.4G module Localisation : , 518031 Guangdong, Personne à contacter : Daisy Wu, 86 0755 83133419

Saturday 12 March 2016

Quantité : 6000 - Prix : $0.72

The MSP430G2x52 and MSP430G2x12 series of microcontrollers are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, and up to 16 I/O capacitive-touch enabled pins and built-in communication capability using the universal serial communication interface and have...

Saturday 12 March 2016

Quantité : 6000 - Prix : $1.1

The Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes is optimized to achieve extended battery life in portable...

Saturday 12 March 2016

Quantité : 8000 - Prix : $2.17

The MSP430x13x and the MSP430x14x(1) series are microcontroller configurations with two built-in 16-bit timers, a fast 12-bit A/D converter (not implemented on the MSP430F14x1 devices), one or two universal serial synchronous/asynchronous communication interfaces (USART), and 48 I/O pins...

Saturday 12 March 2016

Quantité : 6000 - Prix : $0.95

The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, up to 24 I/O capacitive-touch enabled pins, a versatile analog comparator, and built-in communication capability using the universal serial communication interface...

Saturday 12 March 2016

Quantité : 6000 - Prix : $0.7

The MSP430F20xx series is an ultra-low-power mixed signal microcontroller with a built-in 16-bit timer and ten I/O pins. In addition, the MSP430F20x1 has a versatile analog comparator. The MSP430F20x2 and MSP430F20x3 have built-in communication capability using synchronous protocols...

Saturday 12 March 2016

Quantité : 50sets/yea - Prix : Negotiatable

Instruction and Working Principle Lignite briquette machine (has agglomerant type) main equipment are motor, reducer, main machine, belt pulley, ball groove alignment device of roller shell, hydraulic system, electric control and other parts. cause of the gravity of lignite itself...

Friday 11 March 2016

Prix : 0.01-1USD

Machining Processes: Milling, Turning, Drilling, Boring, Tapping, Turning: Contour Turning, Form Turning, Taper Turning Straight Turning Threading, External Turning Threading Internal Turning Threading, Thread milling Knurling, Spline (Wire EDM), Parting/Cutting Facing, Internal Forming...

Friday 11 March 2016

Crépines à fil enroulé est fabriqué par un v ou d'un coin en forme de fil autour d'un réseau interne de des barres de support longitudinales. Chaque point de ces fils d'intersection est soudé par fusion. Le profil fil de v ou en forme de coin enroule autour des tiges de support...

Thursday 10 March 2016

Introduction: Automatic lighting surge generator (or Lighting surge immunity) SG61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by...

Thursday 10 March 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Thursday 10 March 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Thursday 10 March 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Tuesday 08 March 2016

IG3112E 0.15-6KW 150 watt pure sine wave inverter Key Features: 1. Pure Sine wave Output. 2.Low work noise, high efficiency. 3.Small, light and artistic, benefited from adopting the SMD pastern technology. 4.Featured with high reliability and low failure rate by using the advanced...

Saturday 05 March 2016

Quantité : 6000 - Prix : $2.95

The MSP430F23x, MSP430F24x(1), and MSP430F2410 series are microcontroller configurations with two built-in 16-bit timers, a fast 12-bit A/D converter (not MSP430F24x1), a comparator, four (two in MSP430F23x) universal serial communication interface (USCI) modules, and up to 48 I/O pins...

Saturday 05 March 2016

Quantité : 6000 - Prix : $1.5

The MSP430F22x4/MSP430F22x2 series is an ultra-low-power mixed signal microcontroller with two built-in 16-bit timers, a universal serial communication interface, 10-bit A/D converter with integrated reference and data transfer controller (DTC), two general-purpose operational amplifiers...

Saturday 05 March 2016

Quantité : 6200 - Prix : 1,10 €

The MSP430F21x2 series is an ultra-low-power microcontroller with two built-in 16-bit timers, a fast 10-bit A/D converter with integrated reference and a data transfer controller (DTC), a comparator, built-in communication capability using the universal serial communication interface...

Saturday 05 March 2016

Quantité : 20000 - Prix : $0.4

The MSP430G2x01 and MSP430G2x11 series is an ultralow-power mixed signal microcontroller with a built-in 16-bit timer and ten I/O pins. The MSP430G2x11 family members have a versatile analog comparator. Typical applications include low-cost sensor systems that capture analog signals...

Saturday 05 March 2016

Quantité : 10-100 - Prix : 0.01-1

Keywords of CNC Machining Parts: Machining Parts, CNC machining, CNC machining parts, Precision CNC machining parts, precision machin ing parts, CNC Machining components, Machining components Machining Processes of CNC Machining Parts: Milling, Turning, Drilling, Boring, Tapping, Turning...

Saturday 05 March 2016

Quantité : 10-100 - Prix : 0.01-1

Keywords of Turning Parts : Turning parts, precision turning parts, CNC turning parts, CNC turned parts, precision CNC turned pa rts, precision turned parts, turned parts Product Description of Turning Parts: Machining Processes of Turning Parts: Milling, Turning, Drilling, Boring...

Friday 04 March 2016

Quantité : 50 tons

Product applications CC10 is a highgrade modified plastic material, which is applicable to HDPE and LLDPE blown film, PP Injection molding, PP sheet materials, PP wire drawing and HDPE pipe, and so on. CC10is particularly applicable to the film materials, and it can reinforce the films rally...

Friday 04 March 2016

Quantité : 50 tons

roduct applications CC10 is a highgrade modified plastic material, which is applicable to HDPE and LLDPE blown film, PP Injection molding, PP sheet materials, PP wire drawing and HDPE pipe, and so on. CC10is particularly applicable to the film materials, and it can reinforce the films rally...

Thursday 03 March 2016

Quantité : 50 Tons

Product applications CC10 is a highgrade modified plastic material, which is applicable to HDPE and LLDPE blown film, PP Injection molding, PP sheet materials, PP wire drawing and HDPE pipe, and so on. CC10is particularly applicable to the film materials, and it can reinforce the films rally...

Tuesday 01 March 2016

Quantité : 1 - Prix : 1,00 €

Super Board is 100% free from asbestos or sepiolite or any inorganic fibres. It is resistant to abrasion, scratch, thermal, impact and fire attack. Super Board is Super Boardble and weather resistant and will not promote fungi or mould growth. In short, the panel is designed for...

Tuesday 01 March 2016

Quantité : 1 - Prix : 1,00 €

Super Board is 100% free from asbestos or sepiolite or any inorganic fibres. It is resistant to abrasion, scratch, thermal, impact and fire attack. Super Board is Super Boardble and weather resistant and will not promote fungi or mould growth. In short, the panel is designed for...

Tuesday 01 March 2016

Quantité : 1 piece

Product Description The Stroboscope include AT-135A and AT-135B two model. Use photoelectric signal while external trig gering, achieve automatic tracking function of the pattern, Use microcomputer technology, emerging t echnologies, anti-jamming technique and other advanced technology...