COILS（0 - 747 Annonces

Friday 05 March 2021

Typically insulating fluid is contaminated in the following ways: * Particles including fibres, rust and colloidal carbon. * Free and dissolved water. * Gases produced by fluid ageing, equipment failure and arc suppression in switchgear. * Chemical products caused by oxidation...

Wednesday 03 March 2021

Quantité : more than - Prix : 3000-6500 euro per M

Main Feature of Hot Rolled Steel Plate Hot steel coils production is a rolling procedure that relates rolling steel at a high temperature (usually above 1700°F) and over the recrystallization temperature of steel. When the steel heating temperature is higher than the recrystallization...

Wednesday 03 March 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Hot Rolled Steel Coil Hot rolling is a mill process that involves rolling the steel at a high temperature (typically at a temperature over 1700° F), which is above the steel's recrystallization temperature. When steel is above the recrystallization temperature, it can...

Wednesday 03 March 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Galvanized Steel Coils Hot-dip galvanized steel coils are produced by passing the acid-washed and calendered full hard plate through the zinc tank, thereby galvanizing the film on the surface. Galvanized steel coil with good raw materials and 7 times the cold rolling machine...

Wednesday 03 March 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Sheet The cold rolled sheet is manufactured from the hot rolled sheet. The hot rolled sheet is cleaned chemically and processed further in cold reduction mills, where the material is cooled (at room temperature) followed by annealing and/or tempers rolling...

Wednesday 03 March 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Coil Cold rolled coil, as known as CRS or CRC. Cold rolled steel coils are a farther product that uses hot rolled steel coils to do further processing. The further processed steel coil put in a cold rolling mill where the material is cooled (at room temperature)...

Tuesday 12 January 2021

Quantité : 1set - Prix : 5000USD-30000USD

What is insert molding? Insert molding refers to a molding process in which an integrated product is made by inserting a pre-prepared metal material insert into a mould and then injecting the plastic resin, and the molten material is bonded to the insert, cooled and solidified. Insert...

Sunday 10 January 2021

ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals to detect. It is one of the NDT non-destructive testing methods in the industry. We can use different coils according to the shape of...

Tuesday 29 December 2020

Quantité : more than - Prix : 3000-6500 euro per M

Description of Pickled Coils Pickling is a production procedure to remove the oxide scale on the cold rolled steel coil surface during steelmaking. The"pickle tank" that the cold rolled steel coil sink and runs in a diluted solution of inorganic acid, it usually chose to use the hydrochloric...

Tuesday 29 December 2020

Quantité : more than - Prix : 3000-6500 euro per M

Hot Rolled Steel Sheet Production Process The production procedure of HRS is generally as follows: Iron making → steel making → continuous casting (or die casting) → hot rolling process Hot Rolled Sheet production is a rolling procedure that relates rolling steel at a high temperature...

Saturday 21 November 2020

Quantité : 25* 40HQ p

Henan Tiancheng Metal Material Co., Ltd. is engaged in exporting bare aluminum coil & sheet, which includes mill finish aluminum coil & sheet, embossed aluminum coil & sheet, aluminum tread plate, and aluminum circle. Aluminum coil thickness ranges from 0.1mm to 10mm,...

Thursday 01 October 2020

Description of Tinplate Coil Tinplate is made from the cold-rolled sheet which is electroplated with tin. Tin coatings'function is corrosion resistance to steel substrates and preservation of fast and canned foods. Also, the surface of tinplate is suitable for printing and screen printing...

Thursday 01 October 2020

Description of Steel Slab Steel slab is a thick flat steel sheet rolled and cooled from the CCM machine, it can be further processed. Includes use in the following sectors: structural steels, shipbuilding, , pressure vessels, boilers, heavy metal structures, offshore structures, etc...

Thursday 01 October 2020

General Introduction of Steel Billet Prime steel billets are the second stage product in steel production. They belong to hot rolling and directly made and formed in the process of steel smelting, belonging to the category of casting semi-finished products. Their final products involve...

Wednesday 09 September 2020

Quantité : 6000pc/mon - Prix : 1000-6000USD

High Speed Tube Mill Line is used to produce tube diameter between φ4mm to φ50mm. The top working speed can be 120m/min to 130m/min. Working Flow of High Speed Tube Mill Line Decoiling Shear and butt welding Accumulator Roll forming High frequency ERW Removing burrs Cooling Sizing...

Wednesday 09 September 2020

Quantité : 6000pc/mon - Prix : 1000-6000USD

ERW is short for Electric Resistance Welding. ERW features high production efficiency, low cost, material saving and easy automation. High-Frequency ERW Pipe Mill Line is mainly used for making square, round square, rectangular and other shapes of carbon steel, stainless steel and...

Tuesday 25 August 2020

Quantité : 100000pcs/ - Prix : 1.5-8.8

Shot blasting glass beads are glass beads for surface treatment of industrial parts, which are made of non-alkaline soda lime silicate and have certain hardness and elasticity. Its particle size is generally between 45um and 1000um, and the microhardness is generally between 500 and 550Kgf/mm2...

Friday 22 May 2020

Quantité : more than - Prix : 3000-6500 euro per M

Hot Rolled Steel Sheet Production Process The production procedure of HRS is generally as follows: Iron making → steel making → continuous casting (or die casting) → hot rolling Hot Rolled Steel Sheet production is a rolling procedure that relates rolling steel at a high temperature...

Friday 22 May 2020

Quantité : more than - Prix : 3000-6500 euro per M

Description of Pickled Coils Pickling is a production procedure to remove the oxide scale on the cold rolled steel coil surface during steelmaking. The"pickle tank" that the cold rolled steel coil sink and runs in a diluted solution of inorganic acid, it usually chose to use the hydrochloric...

Friday 22 May 2020

Prix : negotiate

High Permeablity,low loss ,high inductance,good quality Ferrite core for inductors,transformers,filters,chokes,co ils ,etc. Our Company founded in 1997,now 23 years' experience in ferrite core filed, our cores througout the world and our domectic market .more than 500 types of cores...

Wednesday 01 April 2020

Quantité : 500 sets/ - Prix : 3000-10000 usd

MYT company has over 15 years of manufacturing and exporting experience in HVAC duct industry line and sheet metal bending machine. Our machines can be customized according to client requirements. Description of HVAC Duct Automatic Duct Line HVAC auto duct production line, which means...

Friday 13 March 2020

Quantité : 1000 - Prix : 0.5-50usd

Wireless charger refers to the charger that is not connected to the terminal equipment that needs to be charged with the traditional charging power cord, but adopts the latest wireless charging technology. Cableless phone charger USES the alternating magnetic field generated between...

Wednesday 06 November 2019

SPECIFICATIONS This Machine is applicable for many kinds of bobbinless coil winding including: voice coils(square and racetrack type), laser head coils, hard disk coils, IC card coils, labeling machine coils, read and write card coils, inductor coils, vibrating motor coils, and some...

Tuesday 05 November 2019

Quantité : 20 - Prix : 20,000 USD - 800,000

RISHBIN Medium Gauge Slitters is used to slit the big rolls into narrow rolls, and packaging it automatically. It works of max. thickness up to 10mm, max. width of up to 2200mm, and speed of up to 100 m/min. It consists of Decoiler with coil car, guiding & pinch device, medium gauge slitters...

Tuesday 05 November 2019

Quantité : 20 - Prix : 20,000 USD - 800,000

Machine Reviews RISHBIN Heavy Gauge Slitters are designed to slit high strength heavy gauge materials. Coils max. thickness of up to 20mm, max. width of up to 2500mm, and speed of up to 60 m/min. It consists of Decoiler with coil car, guiding & pinch device, heavy gauge slitters...

Tuesday 05 November 2019

Quantité : 20 - Prix : 20,000 USD - 800,000

Cut To Length line is a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, leveled, cut to length and blanking. RISHBIN supply full range of cut to length line machine according to client's special requirement by...

Tuesday 05 November 2019

Quantité : 20 - Prix : 20,000 USD - 800,000

Cut To Length line is a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, leveled, cut to length and blanking. RISHBIN supply full range of cut to length line according to client's special requirement by combining...

Tuesday 05 November 2019

Quantité : 20 - Prix : 20,000 USD - 800,000

Machine Reviews Cut To Length line is a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, leveled, cut to length and blanking. RISHBIN supply full range of cut to length line China according to client's special requirement...

Wednesday 30 October 2019

What is insert hanking moulding? Insert molding solutions of hanking refers to a hanking mould technology process in which an integrated product is made by inserting a pre-prepared metal material insert into a hanking mould and then injecting the plastic resin, and the molten material...

Saturday 07 September 2019

Quantité : 30 - Prix : 1$

Mill discharge hose is rubber lined and jacketed hose, which is economical and easy to handle. The jacket shall be evenly and firmly woven and free from visible defects, thread knots, lumps and irregularities of twist. The warp will consist of high strength staple(spun)polyester yarns...