OPTIC - 1846 Annonces

Vendredi 09 septembre 2022

T&S Communication TSQS-8540G-xxxC is a four-channel, pluggable, and parallel fiber-optic QSFP+SR4 for 40-gigabit ethernet and it is compliant with the QSFP MSA, 40G Ethernet IEEE 802.3ba 40GBASE-SR4, and InfiniBand SDR/DDR/QDR standards. As a high-performance module for short-range...

Vendredi 09 septembre 2022

Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment. As a quality fiber optic patch cord factory, T...

Vendredi 09 septembre 2022

What is a ceramic ferrule? Ferrule plays a significant role in Fiber Connectors as well as Fiber Patchcord. With the characteristics of low insertion loss required for optical transmission, a low value in elasticity coefficient, excellent strength and high resistance to changeable environments...

Vendredi 09 septembre 2022

As one of the professional PLC splitter manufacturers, T&S provides a wide range of different fiber optic components at reasonable prices. Based on Planar Lightwave Circuit technologies, our PLC splitter chips can uniformly divide and guide light in the wavelength ranges from...

Vendredi 09 septembre 2022

MTP cable assemblies/MPO cable assembly use MPO or MTP multi-fiber connectors. MTP/MPO Fiber Patch Cord greatly saves space and is very convenient to use. Based on single ferrule MT technology, the MPO Fiber Patch Cord assemblies provide up to 72 fiber connections in a single point...

Jeudi 08 septembre 2022

Functions Why should we use the optical talk set? In some remote areas, the mobile phone may be out of service. In these situations, the fiber optic talk set is essential. With the talk set, the two operators can have a conversation via a optical fiber which is easy and reliable....

Jeudi 08 septembre 2022

Functions FHM2 Series optical multimeter integrates a stable laser source and a precise optical power meter. The laser source part launches 1310nm/1550nm or 1310nm/1490nm/1550nm (according to different models).The optical powet meter part support measuring -70~+10dBm or -50~+26dBm...

Vendredi 02 septembre 2022

Quantité : 5000pcs/we - Prix : 100-1000Usd

Fiber displacement sensor DST-01 is used for long-term measurement of structural beams and large buildings or other concrete, steel structures, building settlements, displacements and landslides. The sensor is installed by pulling rope, which can accurately and quickly measure the...

Vendredi 02 septembre 2022

Quantité : 5000pcs/we - Prix : 100-1000Usd

For different applications, there are multi-points monitoring requirements, we offer all kinds of packaged fbg sensor array which different wavelengths FBG can be inscribed into a single splice less fiber, and packed with different form factored material and cables to meet with different...

Vendredi 02 septembre 2022

Quantité : 5000pcs/we - Prix : 100-1000Usd

FBG accelerometer AL-01 transmits the acceleration change to the FBG after the FBG is properly packaged inside, and calculates the acceleration by measuring the wavelength shift of the fiber grating combined with the fast fiber grating interrogation technology. The AL-01 adopts the...

Vendredi 02 septembre 2022

Quantité : 5000pcs/we - Prix : 100-1000Usd

Armored Fiber Optic Sensing Cable The armored fiber optic cable is a cable with ultra-sensitivity used for quick and easy strain monitoring in secure projects for periphery intrusion warning systems. An array of FBG sensors composes the core of the cable. The interlayer of the cable is a PE...

Vendredi 02 septembre 2022

VCM F1 adopts the traditional voice coil motor design scheme, linear motor structure is simple, high stability. Using high precision grating ruler as position feedback, position resolution accuracy is 25 bits. Digital encoder technology greatly improves positioning accuracy, in addition...

Jeudi 01 septembre 2022

Prix : 10-30USD

The AR optical display module M2010, M3043 developed by goolton surpasses the existing AR optical waveguide display in terms of imaging clarity, resolution, color, weight, volume, and power consumption. It can be customized according to customer needs, to meet the individual needs...

Jeudi 18 août 2022

Quantité : 2000 sets/

The Bettersizer ST is an automated laser diffraction laser scattering particle size distribution analyzer designed for industrial quality control. Its patented DLOS (Dual Lens Optical System) guarantees the instrument to provide consistent and reliable particle size distribution results...

Jeudi 18 août 2022

LWIR lens plays a critical role in thermal imaging surveillance applications, beyond night vision capability, critical targets differentiation in poor vision conditions is considered the most practical attribute in homeland security and defense market segmentation. Compared to the...

Jeudi 18 août 2022

The F-theta scanning lenses are commonly used in laser scanning systems that employ two-axis galvanometers to scan a specified area but cannot tolerate the angle at the image plane. By introducing a specified amount of barrel distortion in a scanning lens, thetelecentric f theta lens...

Jeudi 18 août 2022

Typically opposite of fisheye lens has a front lens group of a greater negative refractive power than an ordinary inverted telephoto wide angle lens, with a large back focal distance. Its extreme power distribution will cause great field curvature in the transmitted image. As fisheye...

Jeudi 18 août 2022

Collimating Lenses Leave A Message! Hyperion Optics Hyperion Optics offers economical custom collimating lens design that can effectively correct spherical and chromatic aberrations, including singlet and chromatic lenses. Many of our clients had experiences where off-the-shelf collimators...

Jeudi 18 août 2022

Beam Expander Leave A Message! Beam expansion Laser beam expansion or reduction is a common application requirement in most labs using lasers or light sources and optics. Users always find there are so many off-the-shelf galilean beam expander, however, hard to find one exactly fit...

Jeudi 18 août 2022

Hyperion Optics specializes in custom anamorphic optics design and production. We are experienced in creating custom solutions for unique applications such as projection and anamorphic photography. Generally speaking, these lenses are special systems that effectively change the aspect...

Vendredi 12 août 2022

Quantité : 50000-8000 - Prix : 8-15USD

The gjxfh-1b is one of the most commonly used indoor gjfjv optical fiber cable types in our company. Indoor drop cable: Small size, especially suitable for adding lines to existing pipelines. Equipped with slot, optical fiber or jumper can be easily taken out. As one of the professional...

Vendredi 12 août 2022

Quantité : 50000-8000 - Prix : 8-15USD

GCYFXTY air blown fiber optic cable is a loose tube made of a high modulus material with a 250µm single-mode or multi-mode fiber. The tube is filled with a non-toxic and harmless waterproof compound, and the loose tube is twisted with a non-metallic reinforcing element. Then extruded...

Vendredi 12 août 2022

Quantité : 50000-8000 - Prix : 8-15USD

The quick SC / APC connector incorporates a new disposable wedge tool system, eliminating the need for specialized expansion tools. SC/ APC quick connector, also called SC/APC optical fiber fast connector, can make your life more convenient. Welcome to order. Details of Fusion Type...

Vendredi 12 août 2022

Quantité : 50000-8000 - Prix : 8-15USD

FISH series are tension clamps for FTTH drop clamp. Fish clamp for FTTH cable can be used in anchoring, turning, suspension fiber optic cable routes. Without suspension wire (in case of fiber optics diameter is 3.3mm*2.0mm): 2turns. With suspension wire (in case of fiber optics diameter is 5...)

Vendredi 12 août 2022

Quantité : 50000-8000 - Prix : 8-15USD

FISH-02 series drop flat cable clamps are tension clamps for FTTH drop cable. Fish FTTH fiber optic clamps, can be used in anchoring, turning, suspension optical fiber cable routes. Without suspension wire (in case of fiber optics diameter is 3.3mm*2.0mm): 2turns. With suspension...

Vendredi 12 août 2022

Quantité : 50000-8000 - Prix : 8-15USD

A fiber optic tool kit contains go-to equipment. A must for any professional technician. With the correct product selection in portable cases, the technician can do the job correctly, easily and keep the network running efficiently. Having the right test equipment in your kit saves...

Vendredi 12 août 2022

Quantité : 50000-8000 - Prix : 8-15USD

Optical termination box (OTB), is a compact fiber management box used for FTTH application. Fiber optic cable terminal box includes faceplate and drop cable protection box which can be used as a termination point for the feeder cable to connect with drop cable in FTTx communication...

Jeudi 11 août 2022

PHX 96-core MTP®-LC branch distribution box, the front panel provides 48 duplex LC interface, rear panel provides 12 MTP® (8-core) interface, There are 12 pairs of MTP® (8-core) -LC fiber branch jumpers pre-terminated internally, so 40G can be achieved by LC duplex fiber jumpers and...

Jeudi 11 août 2022

High-density wiring application. The optical fiber distribution box can be installed in an FHD series frame and wall-mounted distribution box to provide high-density wiring and meet future capacity expansion requirements. Specification of FHD MTP®-8 Cassette Number of Optical Fiber...

Jeudi 11 août 2022

The FHD adapter panel can be quickly stuck into the chassis and is widely used for optical fiber trunk wiring, branch wiring, and device wiring. The color of the adapter complies with THE TIA/EIA-568-C.3 standard, which makes it easy to identify optical fiber types and facilitate...

Jeudi 11 août 2022

Fully equipped with 4 FHD wiring boxes or adapter panels, 1U space up to 144 LC fiber wiring, with detachable cable manager to support front and rear cable management. Specification of FHD 1U 144 Core Optical Fiber Distribution Frame Chassis Height 1U Number of Cores Maximum...

Jeudi 11 août 2022

The 1U distribution box has been improved in structure. The steel plate cover can be slid down and removed and installed without the aid of tools, making cable management easier. Specification of Fhd 1U 144 Core Optical Fiber Distribution Box Chassis Height 1U Number of Cores...

Jeudi 11 août 2022

Used for FC optical fiber ports. Metal sleeves are used for external strengthening and turnbuckles are used for fastening. Generally used on ODF side (most used on distribution frame). Specification of FC Attenuator Fiber Connector FC/UPC Ferrule Type Zirconia Ceramic Connector...

Jeudi 11 août 2022

The ftth fbt fiber optic splitter uses the traditional fused biconical process to disturb two (or more) coated optical fibers in a certain way, melt under high temperature heating, stretch to both sides at the same time, and finally form a special waveguide structure in the form of...

Samedi 06 août 2022

Quantité : Patch Pane - Prix : $0.20-$80

Cat.5e LAN Cable is a twisted pair cable for computer networks. The flat Cat.5e ethernet cable standard provides performance of up to 100 MHz and is suitable for most varieties of Ethernet over twisted pair up to 1000BASE-T (Gigabit Ethernet). As a cat 5e cable manufacturer, Copperled...

Samedi 06 août 2022

Quantité : Patch Pane - Prix : $0.20-$80

In simple terms, cmd cable management is the tidying up and the organization of cords, cables, and other wires in any working situation. Proper management of data and power cabling within or around an IT environment will deliver a number of benefits that will enhance the system availability...

Samedi 06 août 2022

LCD capacitive touch screen technology, query all-in-one machine,4K HD full screen, are widely used for business guidance, advertising service, payment system, and so on. It is widely used in hospitals, banks, shopping centers, city hall, etc, it can be used for government affairs guidance...

Samedi 30 juillet 2022

About of Label Feeder Machine Tronstol SMT Label Feeder For Tronstol A1 Pick and Place Machine The easiest and cheapest way of marking a product automatically is the application of a label with a label feeder. The feeder can be integrated in the automatic pick and place machine and...

Jeudi 28 juillet 2022

AOC is a cabling technology that accepts the same electrical inputs as a direct attach cable, but uses optical fiber "between the connectors". AOC uses electrical-to-optical conversion on the cable ends to improve speed and distance performance of the cable without sacrificing compatibility...

Jeudi 28 juillet 2022

QSFP+ Direct Attach Cables are compliant with the SFF-8436 specifications. 40g harness cable is compliant with the SFF-8431, SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable length (up to 7m). Specifications...

Jeudi 28 juillet 2022

T&S Communication TSQSS-8540G-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 40 Gigabit Ethernet Applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data...

Jeudi 28 juillet 2022

T&S Communication TSQS-8540G-xxxC is a four-channel, pluggable, and parallel fiber-optic QSFP+SR4 for 40-gigabit ethernet and it is compliant with the QSFP MSA, 40G Ethernet IEEE 802.3ba 40GBASE-SR4, and InfiniBand SDR/DDR/QDR standards. As a high-performance module for short-range...

Jeudi 28 juillet 2022

T&S Communication TSSP-8525G-xxxC is a single-Channel, Pluggable, Fiber-Optic SPF28 for 25 Gigabit Ethernet and Infiniband EDR Applications. It is a high-performance module for short-range data communication and interconnect applications that operate at 25.78125 Gbps up to 70...

Jeudi 28 juillet 2022

Functions Grandway provides high precise power meter. FHP1 Series Optical Power Meter are designed for performing the power value test. It can meet the basic demand with low budget in the fiber testing. With the smaller weight, it is easier to take in field. Features Integrated with...

Jeudi 28 juillet 2022

Functions The FHS2 Series laser source offers excellent stability and portability for accurate fiber optic testing. Dual-wavelength, triple wavelength and quad wavelength laser sources are available. If user tests a fiber with both FHS2 series laser source and FHP2 series power meter...

Jeudi 28 juillet 2022

Functions The FHS1 Series laser source offers excellent stability and portability for accurate fiber optic testing. The output power is stable -5dBm and support CW/270/1k/2kHz modulated output mode. Features Both single mode and multi mode laser are available Single output interface...

Mercredi 27 juillet 2022

MEISU's Mechanical Optical Switch is driven by a relay to control the prism to turn, thus switch the path. With several channels such as 1x2 optical switch, 1x4 optical switch,2x2 optical switch, this optical switch is normally used for OLP (Optical Fiber Line Protection) system....

Mercredi 27 juillet 2022

One dimensional linear fiber array is made by placing M / MM / PM fibers on a V-grooved substrate at specified spacing ( pitch ). As for these V groove optical fiber arrays, or the so-called optical v groove fiber array, they are normally fixed into the grooves with epoxy and pressed...

Mercredi 27 juillet 2022

In some optical application, lens, reflector and other micro-optics components are normally needed to be assembled on optical fibers' end face. We can also process the fiber tip into a kind of lens. At present, MEISU has the first-class optical fiber lens processing technology, and...

Mercredi 27 juillet 2022

High temperature resistant connector uses special fiber with high temperature survivable coating and special epoxy, which makes it resistant for 260°C and reflowable as well. HT(260℃）Connector Feature Fiber Type: SM, MM, PM, Transmitting energy fiber Connector Type: FC/UPC, FC/APC...)

Mercredi 27 juillet 2022

High temperature (1000℃) Fiber Optic Collimator & Focuser normally consists of a HT fiber such as gold-coated fiber, HT epoxy and optical lens. As for the characteristics of MEISU's high power fiber collimator and focuser, it is 1000℃ resistable and extremely suitable for high...

Mercredi 27 juillet 2022

MEISU's High Power Optical Switch is driven by a relay to control the prism to turn, thus switch the path. This kind of high power switch is realized by specializing the fiber and the prism to make it stand higher optical power. How It Works Different from regular optical switches...

Mardi 26 juillet 2022

Quantité : 30000 pcs - Prix : 4.2-10

SAPPHIRE INGOTS/RODS Sapphire ingots are typically used as raw materials for further processing. These sapphire rods and sapphire ingots are uniformly shaped, usually as cylinders. The most sapphire optics crystal grows in A-axis, and the most widely used sapphire substrate in the...

Mardi 26 juillet 2022

Quantité : 30000 pcs - Prix : 4.2-10

R-PLANE (1-102) SAPPHIRE WAFERS R plane sapphire wafers are preferred for the hetero-epitaxial deposition of silicon used in microelectronic IC applications. R plane is the non-polar plane of sapphire. So the different positions of R-plane in custom sapphire optics devices, the mechanical...

Mercredi 13 juillet 2022

Quantité : 8000pcs/mo - Prix : 50usd-8000usd

Telecentric illumination is of great significance to the image processing system. Providing stable and reproducible illumination conditions, the telecentric illuminator produced by Canrill can help the image processing tools, such as our machine vision double telecentric lens, to...

Mardi 12 juillet 2022

LED Ceiling Light A full family series, 2nd generation hit products. High quality LED chip among adjustable led ceiling light with Ra90+ for vivid color appearance . All adjustable flush mount ceiling light optics designed by Aero for ideal lighting. Precise adjustment within adjustable...

Mardi 12 juillet 2022

LED Ceiling Light A full family series, 2nd generation hit products. High quality LED chip in lights fixed to ceiling with Ra90+ for vivid color appearance. All optics designed by Aero for ideal lighting. Precise adjustment among led fixed ceiling lights with fantastic interactive...

Samedi 09 juillet 2022

Right angle prism is the 90 degree prism. a. Standard Prism b. Various Material c. Differnet Coating d. Good Price Specification of Right Angle Prism Material BK7 Grade A Optical Glass or UV Fused Silica Dimension Tolerance +0.0, -0.2 mm Clear Aperture >80% Surface Quality...

Samedi 09 juillet 2022

We specialize in solutions that can be used in a variety of installations. Our projection lenses are used in planetariums, simulation, amusement, home theaters, houses of worship, museums, and more. If you have a custom projector lens request, please contact TC optics guys. a. Fisheye...

Samedi 09 juillet 2022

Silicon has a low 2.329 g/cm3 density which is half the density of Germanium, making it ideal for weight-sensitive applications, such as silicon window. Silicon's price is much better compared with Germanium. Many military brand companies choose TC Optics Silicon lenses or windows...

Samedi 09 juillet 2022

Typically, the three-dimensional form is that of a paraboloid, but there are also parabolic mirrors for sale which are curved in only one direction and therefore focus light only in that direction (similar to cylindrical lenses). Our company as one of parabolic mirror suppliers provides...

Samedi 09 juillet 2022

TCOPTICS, a professional optical mirrors supplier China, offers a wide range of custom optical mirrors types. Broadband dielectric mirrors offer near-total reflection over a wide spectral range and are very durable, whereas metallic mirror coatings have high reflectivity over the...

Samedi 09 juillet 2022

As a professional cylindrical lens supplier, we produce different types of cylindrical lens, such as concave/convex cylindrical lens, astigmatism cylindrical lens, and especially widely used to anamorphic compression of LD (laser diode) output beam. You are welcomed to consult the...

Samedi 02 juillet 2022

RYYT 452 series is the market and technology leader in the field of metal decorating press. RYYT 452 series provides a high-performance metal printing solution and excellent print quality. It is an automatic metal offset printing machine with low make-ready times and is easy to operate...

Jeudi 30 juin 2022

Prix : 1000-6000USD

XB8200 X-Ray Lithium Battery Inspection Series XB8200 is mainly used for automatic online detection of positive and negative alignment during the production of square polymer soft pack batteries. The battery x ray inspection system is based on the fully automatic optical detection...

Mardi 21 juin 2022

Quantité : 50,000-80, - Prix : 8-15 USD

Fiber optic cross connect cabinet is a kind of transfer equipment that provides fiber optic cable terminations and patch cords for the backbone and distribution layer fiber optic cables. After the adss fiber optic cable is introduced into the cross connect cabinet, after fixing, terminating...

Mardi 21 juin 2022

Quantité : 50,000-80, - Prix : 8-15 USD

Dirty connectors cause a major percentage of fiber optic network failures; the simplest prevention is to clean the connectors. TUOLIMA Fiber Optic Cleaning Pen is a good helper in cleaning the connector. Specification of fiber cleaning pen Color blue Availability for LC/MU connectors (1...)

Mardi 21 juin 2022

Quantité : 50,000-80, - Prix : 8-15 USD

Optical cable is a communication line in which a certain number of optical fibers form a cable core, and are covered with sheathes to realize optical signal transmission. Fiber optic cable's primary features are large capacity for information transmission, strong adaptability in any environment...

Mardi 21 juin 2022

Quantité : 50,000-80, - Prix : 8-15 USD

The quick SC / APC connector incorporates a new disposable wedge tool system, eliminating the need for specialized expansion tools. SC/ APC optical fast connector, also called SC/APC ftth fast connector, can make your life more convenient. Welcome to order. Details of C Type Fast...

Mardi 21 juin 2022

Quantité : 50,000-80, - Prix : 8-15 USD

The stainless steel banding can guarantee extended service life; and attaching under significant mechanical loads. Minimal breaking load is also different depends on the grade of steel. TUOLIMA's steel cable straps are available in different sizes to assist your strapping needs of...

Mardi 21 juin 2022

Quantité : 50,000-80, - Prix : 8-15 USD

It's a 1550nm 32 port fiber outdoor optical amplifier(EDFA) with 23dbm output power. All installation accessory such as AC or DC power supply, SNMP or switch can be included based on customer requirements. The body of EDFA transmitter is made of cold rolled steel to protect the inside...

Mardi 21 juin 2022

Quantité : 50,000-80, - Prix : 8-15 USD

The quick SC / APC fast connector incorporates a new disposable wedge tool system, eliminating the need for specialized expansion tools. SC/ APC fiber quick connector, also called SC/APC fast connector, can make your life more convenient. Welcome to order. Details of A Type Fast Connector...

Samedi 18 juin 2022

Base Station Duplexer Duplexer is an important RF component in the frequency division duplex wireless communication system. It is composed of a receiving filter and a transmitting filter to realize the functions of receiving and transmitting antenna. Base Station RF Filter Features...

Samedi 18 juin 2022

Remote Radio Unit, rru 4g is a signal transmitting and covering equipment in the distributed base station system. It is connected with the baseband unit of the base station through optical fiber and realizes the wireless coverage of the mobile network by the RRU. Features of 4G RRU...

Samedi 18 juin 2022

4G Portable RRU Base station RRU is a signal transmitting and covering equipment in the distributed base station system. It is connected with the baseband unit of the base station through optical fiber and realizes the wireless coverage of the mobile network by the RRU. As a professional...

Samedi 18 juin 2022

GrenTech 40G QSFP+ SR4 compliant with SFF-8436 and IEEE 802.3ba with a 4 channel VCSEL array and a 4 PIN array, the rate of a single channel is 10Gbps. It is an MPO connector and it can transmit up to 400m over OM3 cable. This module has the characteristics of low power consumption...

Samedi 18 juin 2022

GrenTech 40G QSFP+ LR4 compliant with IEEE 802.3ba and SFF-8436. It uses 4 channels CWDM solution with a LC connector, and it can transmit up to 10km over single-mode fiber. It has advantage of low power consumption and stable performance, and it widely uses in 40G Ethernet and data centres...

Mardi 14 juin 2022

Wholesale Outdoor Lighting Established in 2002, as a professional outside lamp and exterior light fitting manufacturer, our company provides many types of outdoor light fixtures for customers. Outdoor lamps and light fixtures supplied by us cover a wide range, including spotlight...

Samedi 11 juin 2022

For a long time, Primus It has been working to solve the bottleneck problem of network bandwidth optical modules through continuous technological innovation, adheres to concentrate superior forces constantly improve the industrial layout, and enhance the company's core competitiveness...

Samedi 11 juin 2022

FTTH Wholesale Primus lT is one of professional ftth manufacturers and ftth suppliers in China, committing to the research and development of PON technology and provides the best solution in ftth to ethernet/lan converter. Primus lT can cooperate in the development according to the...

Samedi 11 juin 2022

Primus It provides 25G DAC and AOC, which are widely used in 5G fronthaul, data center and other scenarios. All products adopt a fully optimized structural design, and strive to control the consistency and stability of the product, and support customer customization. Specifications...

Samedi 11 juin 2022

Ophthalmic Surgical Devices Ophthalmology, the full name of ophthalmology, is the study of diseases that occur in the visual system, including the eyeball and its associated tissues. Ophthalmology studies vitreous and retinal diseases, optometry, glaucoma and optic neuropathy, cataract...

Mercredi 01 juin 2022

Quantité : 100-100000 - Prix : 18,84 €

Cet arbre artificiel dispose de 90 lumières LED lumineuses avec sept modes de clignotement différents, facilement commutables avec la télécommande incluse et 3 intensités lumineuses peuvent être choisies. De plus, ces LED ont trois modes de luminosité. Les fibres optiques fonctionnent...

Mercredi 01 juin 2022

Surface mounted FBG temperature compensation strain sensor MST-01 is mainly used for optical strain measurement on the surface of various structures such as bridge steel box girder, shock absorber damper, metal anchorage and other metal structural parts. The sensor has built-in temperature...

Mercredi 01 juin 2022

Surface mounted FBG strain sensor MS-02 is mainly used to monitor the stress and deformation of various structural surfaces. The sensor is packaged with high-performance stainless steel material, and is installed on the surface of the monitored object by gluing or spot welding without...

Mercredi 01 juin 2022

Embedded FBG temperature compensation fiber optic strain sensor EST-01 is mainly used for internal fiber optic strain measurement of concrete, reinforced concrete or plastic materials such as foundations, pile foundations, bridges, tunnels, linings, etc, so as to facilitate long-term...

Mercredi 01 juin 2022

Embedded FBG strain sensor ES-01 is specially used for the internal strain measurement of concrete, reinforced concrete or plastic materials, so as to observe the change of internal stress of the structure for a long time, conduct state analysis, and achieve the purpose of warning...

Mercredi 01 juin 2022

Fiber Bragg gratings are very sensitive to stress and temperature. No matter whether the FBG is subjected to stress or the ambient temperature changes, it is reflected in the fiber grating that the grating pitch has changed, that is, the fiber grating sensor has corresponding strain...

Mercredi 01 juin 2022

FBG fiber optic pressure transducer PT-01 is used for accurate measurement of fluid pressure such as liquid and gas, it is based on an industrial-grade design and uses a unique pressure elastic element as a sensing substrate, the sensor has built-in temperature compensation FBG, so...

Mardi 31 mai 2022

Sapphire ingots are typically used as raw materials for further processing. These sapphire rods and sapphire ingots are uniformly shaped, usually as cylinders. The most sapphire crystal grows in A-axis, and the most widely used sapphire substrate in the LED market is its C-plane (0001)...

Mardi 31 mai 2022

SF6 Gas Density Relay The sf6 relay gas density meter with pointer and scale installed on the SF6 circuit breaker is called the density meter; SF6 density relay or density pressure switch without pointer and scale. Some gas density gauge also has electric contact, which doubles as density relay...

Jeudi 26 mai 2022

CRYSCORE can offer Epi-Ready grade sapphire wafer with a very low surface roughness in complete orientation options. C plane sapphire wafers are being extensively used for epitaxial growth of III-V and II-VI compounds, such as gallium nitride (GaN), aluminum nitride (AlN), for bright...

Jeudi 26 mai 2022

Sapphire has a wide transmission range, spanning the three wavelength bands of ultraviolet, visible light and infrared and has high thermal shock resistance, high hardness and wear resistance. Almost no substance except the diamond can produce scratches on its surface, and its chemical...

Jeudi 26 mai 2022

Due to the less mismatched lattice and stable chemical and physical properties, sapphire(Al2O3) wafer is the popular substrates for III-V nitrides, superconductor and magnetic epi-film. They are widely used in GaN and thin-film epitaxial growth, silicon on sapphire, LED market and...

Vendredi 20 mai 2022

A dielectric mirror, also known as a Bragg mirror, is a type of mirror composed of multiple thin layers of dielectric material, typically deposited on a substrate of glass or some other optical material. By careful choice of the type and thickness of the dielectric layers, one can...

Jeudi 19 mai 2022

Many working environments and machines will be used in low light or dark conditions. So we will recommend illuminated membrane switches with internal lighting for backlighting in film. Choose EL film as the light guide plate, fiber optics, and the newer light guide film (LGF) structure...

Mercredi 18 mai 2022

MEISU's hermetic sealing fiber array is realized by gold-coating the fiber cladding before inserting them into a metal (KOVAR) tube. Gap between fibers and tube is fully filled with sodering tin. The metal (KOVAR) tube of MEISU's hermetic sealing fiber is gold-coated as well to prevent...

Mercredi 18 mai 2022

Optical protection switch is an ideal component for OADM, OXC, system monitoring and protection. With the compact package, fiber optical switches can be easily integrated into a high density optical communication system. Designed by professional engineers, MEISU's fiber optic cable/network...

Mercredi 18 mai 2022

Complementary to single mode fiber bundle, 2-D tapered fiber optic cable bundle uses flat-bottom groove and lid to stack multiple fibers tightly together in a rectangular or circle arrangement. Features of Fiber Bundle Arbitrary pattern Customer determined core pitch Pitch accuracy...

Mercredi 18 mai 2022

MEISU's fiber optic 90 degree bend Fiber Arrays are fabricated with ultra small V-Groove substrate and special fibers of small bending radius. The compact dimensions with height less than 8mm makes it suitable for passive packaging in the board and ideal for connection on high speed...

Mercredi 18 mai 2022

Two-dimensional M * N fiber array is a kind of fiber component that has many fibers arranged orderly and accurately in two-dimensional form, with arbitrary fiber core pitch. The pitch accuracy of 2D fiber array can be as small as 1um. 2D Fiber Array Features Arbitrary pattern Customer...

Mercredi 18 mai 2022

Traditional optical fiber collimator is the basic component of optical fiber communication device. However, with the development trend of integration and miniaturization, fiber optical switch, optical cross connection such as N * M equipment, and wavelength selection switch are...

Mercredi 18 mai 2022

MEISU specializes in precise custom fiber array sub-assemblies and PM fiber optical devices and assemblies for different areas like integrated optics, sensoring, healthcare, spectroscopy, etc. With a team have more than 20 years of experience in R&D and production of optical components...

Mercredi 18 mai 2022

Fiber Optic System Components Unlike copper wire-based transmission where the transmission entirely depends on electrical signals passing through the cable, fiber optic communication is the type of communication is used to transmit voice, video, telemetry, and data over long distances...

Mercredi 18 mai 2022

Fiber optic splice cabinet and Joint Enclosure Box is a fiber management product typically used with outdoor fiber optical cables and underground optical fiber splice closure . Fiber joint box provides space and protection for the fiber optic cable splicing and joint. Fiber optic...

Mercredi 18 mai 2022

Fiber pigtail optical is a cable that only one end is terminated with connectors. The other end can be melted with optical fiber for a permanent connection. Copperled is one of fiber optic pigtail manufacturers, fiber optic pigtail suppliers, which would like to classify them from 2 aspects...

Mercredi 18 mai 2022

Fiber Optic Patch Panel Fiber patch panel types is applied in distributing the single-mode and multimode fibers to realize the connection, allocation, and scheduling between the weak trunk and level system. Often times, two ports stand together on a panel are prepared to connect...

Mercredi 18 mai 2022

A fiber-optic patch cord is a fiber-optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch, or other telecommunication equipment. From the connector type, mainly include FC, SC, ST, LC, MU, E2000, MPO/MTP...

Mercredi 18 mai 2022

What Are the Types of Fiber Connectors Optical fiber connectors are used to join optical fibers where a connect/disconnect capability is required. Optical fiber connectors are used in telephone exchanges, for customer premises wiring, and in outside plant, applications to connect...

Mercredi 18 mai 2022

SF6 Gas Density Relay The sf6 relay gas density meter with pointer and scale installed on the SF6 circuit breaker is called the density meter; SF6 density relay or density pressure switch without pointer and scale. Some gas density gauge also has electric contact, which doubles as density relay...

Mercredi 18 mai 2022

Prix : 10-30USD

Jimdoa-E108 Portable Rechargeable Nail Drill, Optics Plating Process, Touch-Sensitive Control and LCD Screen: The touch-sensitive buttons are integrated with the body of the efile nail drill, and the LCD screen shows the current speed and rotational direction of the handpiece, making...

Vendredi 13 mai 2022

Prix : 100USD

Parameters of Arrayed Waveguide Grating AWG Multiplexer Storage Temperature -40 ~ +85℃ Operation Temperature -40 ~ +85℃ Operation Humidity 0 ~ 90 %RH Storage Humidity 0 ~ 90 %RH As a leading fiber optic products supplier in China, we have been growing steadily with our...

Vendredi 13 mai 2022

Prix : 100USD

Extension connector for cable chaining. Flange, Jam-Nut, or In-Line type receptacle assemblies. Low insertion loss and added loss. Height of attenuation. IP67 water, dustproof and corrosion-resistant. The material in the jumper cable is all-weather and UV-resistant. RoHS and REACH...

Vendredi 13 mai 2022

Prix : 100USD

A distinctive, robust cabinet solution that supports and protects rack-mount servers, storage and network equipment in multi-tenant and enterprise data centers, computer rooms and network facilities. As one of 42u rack manufacturers, we have types of 42u rack size in mm for sale,...

Vendredi 13 mai 2022

Prix : 100USD

40G ethernet switch data center The Realise 40G QSFP+ to 4x 10G SFP+ breakout Active Optical Cables (AOCs) offer IT professionals a cost-effective interconnect solution for merging 40G QSFP+ and 10G SFP+ enabled host adapters, switches, and servers. For typical applications, users...

Mercredi 11 mai 2022

3onedata's media converters provide reliable and stable conversion of Ethernet data to fiber optic signals. With industrial-grade design and strong EMC function, good media converter can withstand harsh environments. Features Data Security High isolation protection and data confidentiality...

Mercredi 11 mai 2022

T&S Communication TSPA-85192-xxxC is a Pluggable SFP for 10 Gigabit Ethernet, compliant with the SFF-8431. This transceiver is a high-performance module for short-range data communication and interconnect applications. The length up to 150 m using OM2 MMF or 300 m using OM3 MMF...

Vendredi 06 mai 2022

Orienson is dedicated to helping our customers leverage the power and speed of optical fiber communications. Our high-quality products meet the increasing demands from customers. For more than 10 years, we have provided stamping parts for optical fiber connectors and other fiber optic...

Mercredi 27 avril 2022

Functions FCAA-100 cable&antenna analyzer can test return loss and VSWR of load' frequency. Also can get return loss, VSWR of DTF(distance to fault) and cable loss. Users can be easy to know the oneection of cable&antenna system is reliable whether or not. FCAA-100 series...

Mercredi 27 avril 2022

Datacom tester including 2M Transmission Analyzer, TV Signal Tester, Cable & Antenna Analyzer, 1G(1000M) Ethernet Tester, 10G Ethernet Tester, etc. Why Choose Grandway Datacom Network Transmission Tester The datacom testing analysis instrument provided by Grandway meets the requirements...

Mercredi 27 avril 2022

Functions FXGT 200 has two 10/100/1000Mbps electrical interfaces, two 100/1000M SFP optical interfaces and two 10Gbps SFP+. It can generate and analyze the test traffic streams, and provide the result. FXGT-200 provides install, maintain service and activate new profession service...

Mercredi 27 avril 2022

With more than 20 years of experience in the field of optical detection, Grandway has independently developed and produced various common optical testing instruments. like(OTDR, fusion splicer, PON tester, power meter, laser source, etc). Optic Fiber Network Testing Equipment Expert...

Mercredi 27 avril 2022

Grandway provides abundant fiber optic ftth tool kit with he most complete construction fiber optic tool at the most reasonable price. Grandway Telecom Tech provides fttx products, fiber tool box, ftth tool kit, fiber tool kit and etc. Contact us to know more. Localisation : " 6F...

Mercredi 27 avril 2022

Functions Fiber breakpoint / length / loss testingFiber breakpoint / length / loss testingFiber breakpoint / length / loss testingFiber breakpoint / length 7inch TFT-LCD Screen size(touch screen optional) 24~45dB Dynamic range 3.6~8m Attenuation dead zone 0.8~1.2 Event dead zone 80000...

Jeudi 21 avril 2022

Wholesale Outdoor Lighting Established in 2002, as one of professional wholesale outdoor lighting suppliers, our outdoor lamp company provides many types of outdoor light fixtures for customers. Outdoor lamps and light fixtures supplied by us cover a wide range, including spotlight...

Jeudi 21 avril 2022

Prix : 10-30USD

Penta Prisms are used to define right angles in optical systems. Penta Prisms, which provide right handed images, feature a ray deviation of 90°. Penta Prisms are five-sided prisms and unaffected by slight movements. Edmund Optics offers a variety of Penta Prisms for optimal performance...

Jeudi 21 avril 2022

Prix : 10-30USD

Dove prisms are used as reflective prism inverting the image. Dove prism is shaped from a truncated right-angle prism. Normally, dove prisms are used in the parallel optical path based on critical angle principle to meet total internal reflection with limited FOV. A beam of light...

Jeudi 21 avril 2022

Prix : 10-30USD

Corner Cube Retroreflectors Corner cube is total reflecting prism formed by 3 perpendicular surfaces, where the incident light angle does not influence the final emerging light angle but reflected by 180°, it offers excellent parallelism between the incident and exit beams. Hyperion...

Jeudi 21 avril 2022

Prix : 10-30USD

Hyperion Optics are specialist of providing custom prisms, meanwhile, we are also capable of precision cube prism and optical glass prism bonding of custom design. From simple bi-prism bonding to multiple elements cementing, we provide detailed testing report regarding key specs such as angles...

Jeudi 21 avril 2022

Prix : 10-30USD

Light Prism for Sale Hyperion Optics supplies a range of prisms to meet UV-Visible-NIR applications, with high surface quality and tight tolerance angles. Our materials selection ranges from flint/crown glasses, fused silica, ZnSe, CaF2 etc. Cemented Prism Cube Hyperion Optics are...

Mardi 19 avril 2022

Optical splitter is a part of passive components (also called optical passive components) in the process of optical transmission. Like coaxial cable transmission systems, optical network systems also need to couple, branch, and distribute optical signals, which requires optical It...

Mardi 19 avril 2022

1 4 fiber optic splitter is a part of passive components (also called optical passive components) in the process of optical transmission. Like coaxial cable transmission systems, optical network systems also need to couple, branch, and distribute optical signals, which requires optical...

Mardi 19 avril 2022

Optical splitter is a part of passive components (also called optical passive components) in the process of optical transmission. Like coaxial cable transmission systems, optical network systems also need to couple, branch, and distribute optical signals, which requires optical It...

Mardi 19 avril 2022

Optical splitter is a part of passive components (also called optical passive components) in the process of optical transmission. Like coaxial cable transmission systems, optical network systems also need to couple, branch, and distribute optical signals, which requires optical realized...

Mardi 19 avril 2022

The 1 2 fiber optic splitter is a part of passive components (also called optical passive components) in the process of optical transmission. Like coaxial cable transmission systems, optical network systems also need to couple, branch, and distribute optical signals, which requires...

Mardi 19 avril 2022

Optical splitter is a part of passive components (also called optical passive components) in the process of optical transmission. Like coaxial cable transmission systems, optical network systems also need to couple, branch, and distribute optical signals, which requires optical It...

Mardi 19 avril 2022

The drop cable pigtail is a fiber optic cable terminated with a factory installed connector at one end, leaving the other end terminated. Therefore, the connector side can be connected to the equipment and the other side can be fused with fiber optic cables. Fiber optic patch cords...

Samedi 16 avril 2022

HX electronic technology process specializes in manufacturing PCBAs using fully automated, we have the 6 SMT lines equip Fuji XPF SMT machine for surface mount (SMT) and 2 through-hole technology (THT) lines. HX electronic technology is uniquely positioned to take on large mass, medium...

Mardi 12 avril 2022

Symmetrical mode: That is, the uplink and downlink rates are both 10G. The asymmetric mode can be considered as a transitional form of the symmetric mode. In the early stage where the upstream bandwidth demand is less and the cost is more sensitive, the asymmetric mode can be used...

Mardi 12 avril 2022

Primus IT 1.25G optical module may be provided to support the maximum rate of 1.25Gbps. Using FP or DBF laser, it can be compatible with multiple brand switches, commercial-grade and industrial-grade are optional. Specifications of 1.25G sfp Features of 1.25 g SFP Transceiver Supports up to 1...

Samedi 09 avril 2022

The wattage of the solar panel composed of 48 polycrystalline cells is 180w, 185w, 190w, 195w, 200w, 210w, and 220w. It is most often used for military and civilian life in remote areas without electricity, such as plateaus, islands, pastoral areas, border posts, etc. electricity...

Samedi 09 avril 2022

While floating through the molten tin, the combination of gravity and surface tension results in smooth and flat surfaces on both sides. a) Smooth and flat surface and good vision. b) Excellent optical performance. c) Stable chemical properties. d) Resistant to acid, alkaline, and corrosion...

Samedi 09 avril 2022

Elliptical flat mirror provide a circular aperture and profile when aligned at 45° to an incoming beam, making them especially useful and efficient in periscope applications. Newport's elliptical secondary mirror provide a good combination of performance and value for general purpose...

Samedi 09 avril 2022

Dielectric mirror provides neutral color and very high refelection and is very firm. a. Neutral Color b. Very Stables c. High Reflection d. Large Dimension Specification of Dielectric Mirrors Material BK7 Grade A Optical Glass Dimension Tolerance ±0.2 mm Clear Aperture ...

Samedi 09 avril 2022

The ir dichroic mirror , augmented by colour filters that perfected their colour-selective action, directed a blue image to the first tube, a green image to the second, and a red image to the surface. Specification of Dichroic Mirror Material BK7 or Fused Silica Design Wavelength 546...

Samedi 09 avril 2022

Optical dichroic filter are perceived by humans to be highly saturated in color. Such filters are popular in architectural and theatrical applications. Dichroic reflectors known as cold mirrors are commonly used behind a light source to reflect visible light forward while allowing...

Samedi 09 avril 2022

Our company produces different types of cylindrical optical lenses, such as concave/convex cylindrical lens china, astigmatism cylindrical lens, and especially widely used to anamorphic compression of LD (laser diode) output beam. You are welcome to consult the cylindrical lens price...

Vendredi 08 avril 2022

Quantité : 8000pcs/mo - Prix : 50usd-8000usd

Telecentricity Definition A telecentric imaging lens is a kind of lens that the chief rays are parallel to the optical axis. There are three kinds of telecentric lens, that is the object-space telecentric lens, image-space telecentric lens, and the bi-telecentric lens. Telecentric...

Vendredi 08 avril 2022

Quantité : 8000pcs/mo - Prix : 50usd-8000usd

Telecentric illuminator is of great significance to the image processing system. Providing stable and reproducible illumination conditions, the telecentric illuminator produced by Canrill can help the image processing tools, such as our machine vision telecentric lens, to better...

Vendredi 08 avril 2022

The 2.5D&3D system has the function of conventional 2D galvanometer, and a zoom module is added on the basis of the conventional galvanometer, which solves the problem that the traditional laser scanning galvanometer can only realize plane scanning and small range scanning, and...