Chine (Rép. pop) Divers
Divers

Fuel Injectors

Prix : US$1.00

Auto fuel injector, is a part that injects fuel into the engine cylinder. It also is a simple solenoid valve. When the solenoid coil is energized, the suction force is generated, the needle valve is sucked up, the nozzle hole is opened, and the fuel is ejected at a high speed through the annular gap between the needle and the nozzle hole at the head of the needle valve, forming mist and is conducive to full combustion.

The car fuel injector itself is a normally closed valve, that is when no control signal is input, the valve is always closed. While the normally open valve is when there is no input control signal, the valve is always open, and a valve needle moves up and down to control the valve opening and closing. When the engine ECU sends a fuel injection command, its voltage signal will cause the current to flow through the coil in the car injector to generate a magnetic field to suck up the valve needle, so that the valve can be opened and the fuel can be ejected from the fuel injection hole.

The biggest advantage of fuel injectors produced and sold by MAPMS is that the fuel supply control is very precise so that the automobile fuel system can have the correct air-fuel ratio in any state, which not only keeps the engine running smoothly, but also the exhaust gas can meet the specification of environmental regulations.

Fuel Injectors Features

Strong self-cleaning ability, the nozzle holes are not easy to deposit carbon and block.

High performance of injection characteristics with good injection angle and good atomization effect.

Easy to clean.

What Are the Symptoms of a Bad Fuel Injectors?

Engine Jitter

When the fuel injector is damaged and the fuel injection is not smooth, the engine will have symptoms such as running jitter during the working process.

Power Drop and Fuel Consumption Increase

Once fuel injector is damaged, the fuel injection amount and fuel injection pressure cannot be guaranteed, which will cause the symptoms of vehicle power drop and fuel consumption increase.

Increased Exhaust Emission Pollution

The failure of fuel injector will inevitably affect the mixing and combustion of combustible gas mixtures, which will result in an increase in vehicle exhaust emissions.

Difficulty Starting or Even Stalling

If the fuel injector is seriously damaged, the vehicle will have difficulty in starting, or even suddenly stall during driving.

The Engine Lacks Cylinders

If the fuel injectors of individual cylinders are seriously damaged, the engine is very likely to have cylinder shortages, which will cause the engine to shake violently.

Black Smoke from Car Exhaust

As the damage of the fuel injector, the atomization of fuel and the mixing with air cannot be guaranteed, so the combustible mixture cannot be completely burned, resulting in black smoke from the vehicle.

For more information about car fuel injection system, please feel free to contact us!

If you need any kinds of car auto spares, please contact us, as one of the most professional car spares suppliers, MAPMS is willing to offer you high quality products.

Localisation : Room 1505, F15, Bldg T2, 2 Yichuang St, Huangpu 510555, Guangzhou, China, 510555 Guangzhou,
Personne à contacter : MAPMS MAPMS, +86 139 2617 0287

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Fuel Injectors

Rechercher dans la catégorie : Divers
Rechercher dans la catégorie :
fuel, injectors
France 59590 Pro / B2B
Vanne à passage direct

Mercredi 14 septembre 2016

Quantité : 5000 - Prix : 50,00 €

Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)

ETM Armaturen

  • 59590 - Henri Durre
  • 86 577 67953935
France 59590 Pro / B2B
Y FILTRE

Mercredi 14 septembre 2016

Quantité : 5000 - Prix : 50,00 €

Y FILTRE Corps Acier A216 WCB & GS-C25 & 1.0619 & GP240GH - Cartouche inox 304 démontable - Joint Graphite Bouchon de purge acier Montage horizontal ou vertical avec fluide descendant Respecter le sens de passage indiqué sur le corps par une flèche Connection: DIN...

ETM Armaturen

  • 59590 - Henri Durre
  • 86 577 67953935
Chine (Rép. pop) 201206 Biens d'équipement
Continuous vacuum induction melting furnace

Mercredi 22 avril 2015

Main technical data of of Continuous vacuum induction melting furnace Model Capacity (Kg) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF voltage (V) IF frequency (HZ) Cooling water consumption (m3/h) Cooling Water Pressure...

Shanghai SIMUWU Vacuum Techbology Co., Ltd