Glass Coating Machinery
The whole process of glass spraying by glass coating machine is divided into six parts: pretreatment, preheating, soot blowing purification, spraying, drying, and "three wastes" treatment.
1. Pre-processing glass coating machinery: the main purpose of this process is to enhance the adhesion of the workpiece, which is mainly composed of pre-stripping, main stripping, and table adjustment. It is necessary to remember to keep the indoor temperature stable during uv coating line and vacuum coating machine operation.
2. Preheat treatment: its function is also to enhance the adhesion of the workpiece, mainly to make the spraying room reach a certain temperature.
3. Glass bottle soot blowing purification equipment: this step is mainly to ensure the cleanliness of the construction environment, if it is a standard dust-free workshop, this link can be skipped. This is because if dust is left on the glass, the surface of the sprayed workpiece will feel like sand and the surface is not smooth enough.
4. Spraying equipment: if people spray by hand, there are high technical requirements for workers, but now most manufacturers use robots to spray, although machines are much more reliable than manual spraying, but don't forget if there are any omissions that need to be repaired. Inquiry vacuum coater for sale!
5. Paint drying: before the drying operation, the paint has a leveling stage, so the distance between the drying room and the spraying room should be appropriate, and it would be better to control it at about 6-8 meters. In addition, attention should be paid to the temperature and time of baking when drying.
- The treatment of "three wastes": at present, industrial production pays attention to low-carbon environmental protection, especially the wastewater, waste gas, and waste residue after glass processing must be treated properly. The wanton discharge will not only pollute the environment but also violate the law!
Personne à contacter : uvcoating kisinhom, 0512 5513 2371
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de Glass Coating Machinery Rechercher dans la catégorie : Pro / B2B Rechercher dans la catégorie : glass, coating, machinery |
Samedi 15 novembre 2014
Nous vendons sauf vente entre temps la machine suivante : * Roland R 304 HOB-E+LV - Année 1999 53x74 - 4 couleurs + Groupe Vernis avec "Chambre à Racle Tresu" et Cylindre Anilox - Pompe d'alimentation en Vernis. Pupitre RCI 2 - CCI Roland avec ColorPilot Grapho Metronic - CPL...
ACS DIFFUSION s.a.s.
- acsdiffusionsa
- 42952 - Saint-Etienne
- 0033 (0)4 77 92 77 88
- 06 10 63 37 83
Mercredi 15 juillet 2015
PE Stretch Films Stretch film is a commonly used name for multi-layer (3 to 5 Layered) elastic polyethylene film which it's main raw material is Linear low density polyethylene (LLDPE). Stretch film is used primarily for packing and protection of products, ranging from loads bundled...
Atlas Pars
- 1954966313 - Tehran
- +982126150173
- +989126882335
Mercredi 15 avril 2015
Quantité : Inquiry - Prix : USD 0.25-0.5/Watt
Dimensions : 156mm x 156mm ± 0.5mm. Thickness (Si): 180μm ± 20μm / 200μm ± 20μm. Front : Silver bus bars Silicon nitride anti-reflection coating. Back : Silver bus bars Full-surface aluminum BSF. Localisation : 5F,No.2.Sec.4.JhongyangRd,TuchengCity.Ta ipei County 236,Taiwan R.O...
Taiwan
- 23678 - New Taiwan City
- +886 2 22691686