Chine (Rép. pop) Divers
Divers

K11 Flexible Waterproof Coating

Quantité : 500kg

In recent years, with the improvement of people's living standard, the living conditions of the requirements is also rising, which highlights the growing importance of waterproof family. The new concept of "health for Verizon waterproof, care homes", is committed to the comprehensive protection of water security for most of families Home Furnishing, exclude the difficulty and anxiety. Ruisen waterproof coating is a two component, acrylic polymer modified cement based waterproof coating, the simple operation, excellent performance, has the very good waterproof effect.

Introduction of K11 Flexible Waterproof Coating:

Ruisen general type waterproof coating has the advantages of simple operation, chemical reaction mixture is formed on the surface of materials, waterproof coating, and can penetrate the formation of crystal water through internal repression, achieve double waterproof effect. This product conforms to JC 1066-2008"architectural waterproof coating limit of harmful substances"requirements.

The Features of K11 Flexible Waterproof Coating:

1. New environment-friendly products, non-toxic harmless, nonpolluting;

2. Cold construction, only the stirring can be used;

3. The construction can be in damp base (but not water), and the bond;

4. Able to withstand high hydrostatic pressure, water face, negative surface is effective waterproof;

5. Good wear resistance, strong adhesion, can be directly in the dry solid plastering waterproof membrane, stickup ceramic tile etc.;

6. Good permeability, coating material can penetrate the pores of cement-based materials, blocking the water channel, waterproof effect is reliable.

Scope of Application:

1. The family decoration engineering such as kitchen, bathroom, Balcony: roof waterproof, Puttie wallpaper, wood floor surface moisture, mildew, ground moisture proof;

2. The basement, walls, water supply and drainage pipeline, swimming pool, drinking water, the water tank.

Construction Technology of K11 Flexible Transparent Waterproof Coating:

The base surface treatment

1. The construction of the base surface should be smooth, firm, clean, no water, no leakage;

2. For the larger holes and cracks is greater than 0.1mm should be the first to use repair mortar repair;

3. With water wet surface to saturation, construction can be no clear water surface.

Method of Use:

1. Open the packaging barrels, the raw material bag is taken out; the slurry into the container, stirs lowly add powder, stir into the subtle mixture; stir and let stand for 5 minutes to make slurry curing, and then stir a moment can be construction (slurry after adjustment shall be within 1 hours after appropriate);

2. The use of construction roller or brush, brush waterproof layer is generally at least two-layer, second layer brushing direction should be perpendicular to the first layer, to achieve the best effect of the coverage gap is big, suggest enhanced by glass fiber grid cloth;

3. The second layer coating should be 2~3 hours in the first layer of dry, the specific time depending on the environment conditions on site adjustment;

4. Each layer of brush thickness control in less than 1mm, to facilitate maintenance and curing; total thickness of the two layer is about 1.5mm, the dosage of 1.8~2kg per square meter;

5. Waterproof layer construction and maintenance after 1~2 days, the waterproof layer should be fully cured before the next procedure construction.

Localisation : HeAn District, Industrial Area, Zhangping, Fujian, China, 364400 zhangping,
Personne à contacter : Zang Iven, 0597 3271526

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
K11 Flexible Waterproof Coating

Rechercher dans la catégorie : Divers
Rechercher dans la catégorie :
waterproof, coating, flexible
Maroc 81000 Alimentaire
photo non disponible

Samedi 16 février 2013

Quantité : sur comand - Prix : à négocier

Notre unité de traitement des produits de la mer destinés à la congélation se trouve au sous-sol de notre établissement, déjà agréée pour le traitement du poisson frais, situé dans la zone extra portuaire de tantan port, au maroc. - Superficie totale de 630 m2. - Approvisionnement...

FRIGO BOUCHTA

  • 81000 - TANTAN PORT
  • 00212627520977
France 59590 Pro / B2B
Robinet à soupape - Corps Acier à soufflet Inox

Mercredi 14 septembre 2016

Quantité : 5000 - Prix : 100,00 €

Corps Acier A216 WCB & GS-C25 & 1.0619 & GP240GH - Clapet Inox 420 - Siège Inox 420 - Soufflet Inox 321 - Presse étoupe Graphite Tige et volant montants tournants - Chapeau et presse étoupe boulonnés - A brides RF PN16/ PN25/40 - Commande par volant fonte - Peinture...

ETM Armaturen

  • 59590 - Henri Durre
  • 86 577 67953935
France 529000 Biens d'équipement
2-Wire Flat Cool White LED Rope Light

Samedi 19 juillet 2014

Cool White LED with color temperature 7000K to 7500K implies a mild blue tint in the white glow. Cool White is preferred in many applications because the light they output makes items illuminated appear crisper. Cool White is often preferred in bathrooms and other task areas. Note...

Real Green lighting Company

  • Bonny Chan
  • 529000 - Jiangmen City
  • +15 6 02 20 39 93