Precautions Before Operating The Bottle-Top Dispenser
Please read following instructions carefully before the operation in case of any danger or degraded performance of bottle-top dispenser.
Operation procedures
1. Insert both inlet and outlet and then tighten screws;
2. Remove cap and place it under outlet pipe;
3. Turn knob to intended scale marking;
4. Lift piston to a certain height and press it down; repeat this operation until all air bubbles are discharged;
5. If step 4 fails, check whether pipette and other valves are properly mounted;
6. Lift piston to the highest position of travel, and then press it down to the lowest position of travel;
7. After use, press piston down to the lowest position of travel and then lock the bottle-top dispenser.
Precautions
1. Insert inlet and outlet gently to prevent any damage;
2. Tighten valves properly before use to prevent splashing during piston movement;
3. Make piston move slowly at a constant space during dispensing;
4. Stop operation immediately in the case of any failure to prevent further damage to dispenser;
5. Recover cap of outlet pipeline after use to prevent residual liquid dropping down;
6. Turn the knob to 0 after use for safety consideration;
7. Use dispenser within the allowable working temperature range.
Personne à contacter : Bruce Lu, +86 29 89284429
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
|
Cette page concerne les importateurs et exportateurs de Precautions Before Operating The Bottle-Top Dispenser Rechercher dans la catégorie : Divers Rechercher dans la catégorie : operating, precautions, dispenser, before, bottle |
Tuesday 17 March 2026
Quantité : 1000 - Prix : 5,00 €
♦ Functions * 1-channel temperature monitor * 2-channel fan speed control * 6-level fan speed control (manual) * Fan speed storage function * Auto fan speed control → 40°C: Low 50°C: Middle 60°C: High * Immediate visual indication of Fan/HDD operation * Displays system...
Tengda Electronics Limited
- simeongao
- 518102 - hongkong
- +85 2 21 10 18 65
Tuesday 17 March 2026
♦ Functions * 2-channel temperature monitor * 1-channel fan speed control * Run time function * Fan fault alarm * Temperature fault alarm * Fan speed storage function * Auto fan speed control → 40°C: Low 50°C: Middle 60°C: High * Immediate visual indication of Fan/HDD...
Tengda Electronics Limited
- simeongao
- 518102 - hongkong
- +85 2 21 10 18 65
Tuesday 08 September 2015
Module parameters HD-960P-38*38mm 1.3megapxel low-illumination HD web camera Network Camera - Sensor type 1/4 inch、1.3megapixel , CMOS low-illumination width dynamic sensor - Minimum illumination Color: 1 Lux/F1.2, black and white: 0.02Lux/F1.2 - Electronic shutter 1/5 second ~ 1/50...
ZT Technology Group Ltd.
- ellazhan
- 852 - Fo Tan
- +85 2 26 75 75 58
Paiement sécurisé





