Hong Kong Pro / B2B
Pro / B2B

Wheel Brake Cylinder

The wheel master cylinder is a component in drum brake systems that converts hydraulic pressure into mechanical force to engage the brake shoes against the brake drum. It plays a vital role in slowing down or stopping the vehicle by creating friction between the brake shoes and the drum, resulting in effective braking performance.

Types of Wheel Brake Cylinder

QWC001 Wheel Brake Cylinder

Components of a Wheel Brake Cylinder

Cylinder Body:

The cylinder body is the main housing of the cylinder wheel brake. It is typically made of cast iron or aluminum and contains the other components. The hydraulic fluid enters the cylinder body through the inlet port and exerts pressure on the piston.

Piston:

The piston is a movable component inside the cylinder body. When hydraulic pressure is applied, the piston is forced outward, pushing the brake shoes against the drum. The piston is usually fitted with seals to prevent hydraulic fluid leaks and ensure effective pressure buildup.

Seals and Boots:

Seals and boots play a critical role in maintaining the integrity of the hydraulic system. They prevent hydraulic fluid leaks and contaminants from entering the cylinder. The primary seal is located around the piston and helps maintain pressure. The boots, also known as dust boots, protect the seals and piston from debris and moisture.

Return Spring:

The return spring is connected to the piston and assists in retracting the piston when hydraulic pressure is released. After the brakes are applied and pressure is released, the return spring pulls the piston back into its initial position, allowing the brake shoes to release from the drum. This action prevents unnecessary friction and wear.

These components work together to ensure that the wheel brake cylinder functions properly, allowing for efficient braking and reliable operation of the drum brake system. Proper maintenance and periodic inspection of these components are essential for safe braking performance.

Signs for Replacing New Wheel Brake Cylinders

Recognizing when to replace wheel brake cylinders is crucial for maintaining a vehicle's braking system. Here are four signs that indicate it's time to replace your wheel brake cylinders:

Spongy Brake Pedal:

If you notice a spongy or soft feeling when pressing the brake pedal, it could indicate a brake fluid leak from a failing wheel brake cylinder. Air may be entering the system due to the leak, causing a decrease in braking effectiveness. A firm and responsive brake pedal is essential for safe braking.

Brake Fluid Leaks:

Visible brake fluid leaks around the wheel brake cylinders are a clear indicator of a problem. Leaking brake fluid can corrode components, lead to a loss of hydraulic pressure, and compromise overall braking performance. Check for wet or oily spots near the brake cylinders and brake shoes.

Uneven Brake Shoe Wear:

Uneven wear on the brake shoes can suggest a malfunctioning wheel brake cylinder. If one wheel brake cylinder is not functioning correctly, it can cause the brake shoe on that side to wear unevenly compared to the other side. Inspect the brake shoes during regular maintenance to identify any discrepancies.

Reduced Braking Performance:

If you notice that your vehicle takes longer to stop or the brakes feel weak, it could be due to failing wheel brake cylinders. Inefficient cylinders can result in inadequate brake shoe contact with the drum, leading to decreased braking power. Reduced braking performance is a serious safety concern that requires immediate attention.

If you experience any of these signs, it's recommended to have your vehicle inspected by a qualified mechanic. Replacing worn or faulty wheel brake cylinders promptly helps ensure your vehicle's braking system operates effectively, promoting safety on the road.

As one of brake wheel cylinder suppliers, we can offer sorts of related products for sale, anything you need, please contact us.

Localisation : Gaylord Commercial Building 114-118 Lockhart RD HK, 999077 Lockhart RD,
Personne à contacter : com Qllino, 86 571 82789568

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Wheel Brake Cylinder

Rechercher dans la catégorie : Pro / B2B
Rechercher dans la catégorie :
wheel, cylinder, brake
Chine (Rép. pop) 250000 Biens d'équipement
Testeur d'étanchéité de chaleur

Jeudi 16 mai 2024

Quantité : 999 sets - Prix : negotiated

Testeur d'étanchéité de chaleur estprofessionnellement conçu pour la mesureprécise du temps, de température et depression d'étanchéité. Testeur d'étanchéité dechaleur est pour la détermination de laheatsealability d'une surface, ou couche demastic de films, stratifiés, composites...

Cell Instruments Co., Ltd

  • 250000 - Jinan
  • 86 531 88977152
Chine (Rép. pop) 451200 Biens d'équipement
2015 Energy Saving Two-stage Vacuum Brick Making Machine with Low Price

Mardi 04 août 2015

Prix : FOB Price: USD100000

Quick Details Model: JKY75/75-4.0 Packaging & Delivery Packaging Detail: Nude Packing or Wrapping by Plastic Firm Delivery Detail: Within 25 days after prepayment Specifications Brick Making Machine for Clay Brick Production Line Product Description 1) Reasonable structure...

China Gongyi Yuanhang (Group) Machinery Equipment Co.,Ltd

  • 451200 - Gongyi
  • +86 371 85669181
  • +15 5 03 71 83 90
Chine (Rép. pop) 714000 Biens d'équipement
photo non disponible

Dimanche 28 septembre 2014

- Specifications - 1.Great Rigidity and Strength 2.Excellent Flexibility Force 3.ISO9001, various sizes 4.Anti-corrossion TID Tech offers one of the most comprehensive range of Duct Rodders available anywhere in the world - from the smallest Φmm 4.5 to Φ16mm Duct Rodders...

TID technology development Co.,Ltd

  • tidpower
  • 714000 - Shaanxi
  • +86 913 2112960