CYCLE - 3421 Annonces

Monday 31 October 2022

Quantité : 6M meter/y

Our footwear films are ideal for use in harsh conditions and during strenuous exercise. S Series Footwear Film Provides Excellent Performance in Various Fields No matter what you are doing, our footwear film will keep you in the most comfortable state, so that you feel more free and protected...

Sunday 30 October 2022

Prix : 1000-6000USD

Model: YEV-300 YEV-600 YEV-1000 YEV-2000 YEV-3000 Product Performance Force: 300kgf / 600kgf / 1000kgf / 2000kgf / 3000kgf Max acceleration: 100g(without load) Max displacement: 51mm Max speed: 1.6/1.8/2 m per minute Description of High-Frequency Electromagnetic Vibration Test Machine...

Sunday 30 October 2022

Materials of Sunkye MIL DTL 26482 Plug Series Small Circular Connector Shell: aluminum alloy Finish: olive drab cadmium (W), black anodized plating (F), black zinc nickel (K), Nickel(T) Backshells Aluminum alloy Cable glands: Thermoplastic Coupling ring: Aluminum alloy Spring washer...

Sunday 30 October 2022

The high pressure high temperature hthp electrical connectors are designed to support the signal transmission of high voltage rating, and there is no safety risk for operators. In the design of connection system, the very high temperature connectors shall have 360° shielding layer...

Saturday 29 October 2022

Pipe shot blasting machine or steel pipe shot blasting machine is suitable for any diameter and length of steel pipe cleaning, it can remove the oxide, rust, and scale from welded steel pipe, so that the pipe surface shows metallic colors. Pipe outer wall shot blasting machine pipe...

Saturday 29 October 2022

Prix : 5000-30000

Industrial Molding Parts Industrial moulding parts are referred to the plastic parts of industrial precision molded products, we preferred to think of it as non-consumer products. Nowadays, the demand for consumer products is oversupplied, and the demand for industrial products is increasing...

Saturday 29 October 2022

Prix : 5000-30000

Home Appliance Mould Embroidery Machine Frame Mould 4937-2 Plastic frame for a multi-needle embroidery machine. Mould Name: Embroidery Machine Frame Mould Part Material: Pa 66 GF50% Product Description Large Embroidery hoop frame Mould Cavity: 1 Cavity Mould Size: 450*650*410 mm Mould...

Saturday 29 October 2022

Prix : 5000-30000

Plastic Gear Mold Design 49122 Mould Name: Custom Plastic Gear Mould Part Material: PA6 Product Size: 33*16.5mm Product Description: Plastic Motor Gear Mould Cavity: 4 cavities Mould Size: 350*350*332 MM Mould Cavity Steel: 8407 Mould Injection System: 3 plate point gates hot runner...

Saturday 29 October 2022

Prix : 5000-30000

Family Mold Injection Molding 491138 Mould Name: 1+1 Family Mould Part Material: PA6 GF30 Product Size: 78*35.6mm Product Description: Scharnier right & Left Mould Cavity: 1 + 1 Cavity Mould Size: 350*400*498MM Mould Cavity Steel: 8407 Mould Injection System: 3-plate point gate...

Saturday 29 October 2022

Prix : 5000-30000

Double Shot Plastic Injection Mold Products Part function: Jug Cap Part material: PP & POE Cavity: 2+2 cavities Cavity steel: ASSAB 8418 Life Cycle: 1,000,000 shots Lead time: 55 working days after deposit Payment: 40% deposit, 30% after first of trial, 30% before shipping HanKing...

Saturday 29 October 2022

Prix : 5000-30000

Double Injection Mold Parts Part function: Plastic Lid for coffee machine Part Standard according to ISO 11496 Surface: SPI A-2 finish Flammability classification: UL-94 HB Part material: ABS & TPE Shrinkage: 0.55% Cavity steel: ASSAB 8407 Life Cycle: 500,000 shots Payment: 40% deposit...

Saturday 29 October 2022

Rosun water disinfectant powder is an advanced oxidation technology basing on sulfate radical [SO4-], using potassium monopersulfate compound powder (2KHSO5.KHSO4.K2SO4)as its active ingredient. By using high-energy activation technology to produce active oxygen [O] through the...

Friday 28 October 2022

Quantité : 2-4999 - Prix : $4.00

New Original Simcom Wireless Module Multi-mode GSM/GPRS+GPS Chip Datasheet Module [Protocol]：NMEA0183 V4.1 and earlier version, the maximum refresh rate is 10Hz [Certification]：Pending [Package]：Half Hole (SMT) [Introduction]：E108-GN01 is a highly integrated, low-cost, low-power,...

Friday 28 October 2022

Quantité : 1-2000 - Prix : 1-100

SMC Auto Parts Description SMC auto parts made from sheet molding compound (SMC) are typically 25-35% lighter than steel parts and aluminum products of the same strength. The stroke is increased and the fuel consumption is greatly reduced. SMC Auto Parts Manufacturer Waiwaitree is...

Friday 28 October 2022

Quantité : 1-2000 - Prix : 1-100

Cars, buses, trucks, transport and special vehicles • Weight: Parts made from sheet molding compound (automotive smc) are typically 25-35% lighter than steel parts and aluminum products of the same strength. The stroke is increased and the fuel consumption is greatly reduced. • Stable shape...

Thursday 27 October 2022

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts...

Thursday 27 October 2022

With more than 20 years of experience in clean room injection molding, as the medical silicone molding company in China, we specialize in various clean room injection molding process techniques including medical device injection molding and medical grade medical silicone molding...

Thursday 27 October 2022

Packson is not totally the same as other medical plastic injection molding companies. Because we are an ISO-certified medical injection molding provider. Packson had got the certification of ISO 13485: 2018 and ISO 9001: 2008. We've been working with healthcare and medical molding...

Thursday 27 October 2022

2k injection molding process is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k plastic injection moulding consists of two different plastic materials and colors. With...

Wednesday 26 October 2022

Laundry always become a problem if you do not own a china portable washing machine for yourself. Laundromat can not guarantee the safety of your clothes and public washer always seems to far from your apartment. Well, now this little comes and do all the magic for you! It's space-efficient...

Tuesday 25 October 2022

Prix : US$20000~25000

Robot + Integrated solutions Forge in-building service ecology, achieve service vicious cycle In-building consumption feedback, share intelligent service dividends Intelligent service Digital management Inter-business collaboration Increased revenue Building service management platform...

Saturday 22 October 2022

Tianhe provides different types of cheap sanitary napkins wholesale with high quality. We have both small short size and large long size, mini or extra large bulk sanitary pads also available by our advanced making machine. As a reputable sanitary napkin pads company, we also supplies...

Saturday 22 October 2022

Prix : 10-30USD

Custom lithium battery packs include Li ion battery packs (or called Lithium ion packs), LiFePo4 battery packs, Lithium polymer battery packs, which are customized lithium ion power packs, lifepo4 power packs, lithium polymer battery cells to reach different requirements of battery pack capacity...

Saturday 22 October 2022

Prix : 10-30USD

PLS LiFePO4 li ion battery packs are assembled with PLS cells, which may have 14500, 18500, 18650, 26650, 32650, and some prismatic high capacity models. These battery packs are common used for backup power supply, renewable power storage, lead-acid battery replacements. We, a lifepo4...

Saturday 22 October 2022

Types of small tube cleaning brushes Tube brush is a very efficient, convenient and cost-effective tool, which is widely used in food, manufacturing and other industries. Tube brush can be easily installed on pneumatic tools, machine tools, bench drills, or can be used directly by hand...

Saturday 22 October 2022

This kind of brush is mainly used on the surface of the workpiece, the internal polishing of the groove. We can provide an aluminum alloy base as required for installation. At the same time, the strip brush can be made in various types of derivative patterns, for example, can be wound...

Thursday 20 October 2022

Quantité : USD3000-20 - Prix : 30-40sets/per month

It is the most widely used thermocouple in the hot runner system, and it is characterized by low price and is suitable for vacuum oxidation in reduction or inert atmosphere, the temperature range is -200～800℃, but the commonly used temperature is only below 500℃ because the oxidation...

Thursday 20 October 2022

Sunrise G1 crystalline solar panel, using 158.75mm best monocrystalline solar panels, product customization includes full black double-sided double-glass, power grade is divided into 325-345w, 390-415w solar panel and 410w bifacial solar panel. The product has the characteristics...

Thursday 20 October 2022

As one of the professional oil filled transformer manufacturers, our oil immersed type transformer is specially developed and designed based on the advanced technology abroad for rough mountainous topography and transportation difficulties to meet the requirement of China oil type...

Wednesday 19 October 2022

20L paint bucket mould and paint pail mould with reliable mould structure. Its advantages include long mould life, fast cycle time and high output. This series of product has various size,from 1L to 25L. 20L PAINT BUCKET MOULD PAINT PAIL MOULD DETAILS Item No.: JO70-1 Product Material...

Wednesday 19 October 2022

Prix : 1＄-100＄

The new energy storage connector sockets conform to international standards. AP designs an easy locking mechanism to ensure a reliable connection. Features of Energy Storage Connector SocketThe new energy connector shells are made from thermoplastic material. It features durable, good dielectric...

Saturday 15 October 2022

Paraffin wax emulsion is a multi-phase emulsion in which materials such as natural wax and synthetic wax are dispersed in water under the action of an emulsifier. The production method is mainly a phase inversion emulsification method. We, being one of wax emulsion suppliers, can...

Friday 14 October 2022

CNC LATHE ADVANTAGES Imported spindle unit specially ordered according to industry needs. V-ribbed belt transmission, more stable. Multiple sealing structures, prolong service life. Φ180 combined bearing, compared with Φ160 bearing combination configured by other manufacturers,...

Wednesday 12 October 2022

The automobile brake pad steel back spot laser welding machine adopts the intermediate frequency controller, which has high control precision, stable output current and saves power compared with the power frequency. The laser spot welder has the function of single/continuous spot welding...

Wednesday 12 October 2022

Founded in 2003, under global Fortune 500 group Midea's Mechotronic Business Unit. We dedicated in providing our customers with efficient, robust, and cost-effective industrial solutions. We believe that "Made In China" will keep bringing more power to the world. What Are The Highlight...

Wednesday 12 October 2022

As a classification of mobile housing products, The prefabricated farm buildings has been widely used in livestock and poultry sheds, barns, grain, animal feed and other agricultural materials storage. Due to the product mainly steel square tube and C section steel purlin as the skeleton...

Thursday 29 September 2022

The ballast tank is a complex structure, the tank is dark and wet, and the working conditions are bad. The steel must be shot blasted to ISO Sa 2.5 and immediately painted with a suitable shop primer. Sandblasting is the most ideal method for the second time derusting of ballast tanks...

Thursday 29 September 2022

Due to the intelligent development of automobiles, the application range of PCB pick and place machine in the automotive field is becoming more and more extensive. The popularity of new energy vehicles, the invention of driverless cars enable PCB automotive more and more effective...

Thursday 29 September 2022

Quantité : 5000 units - Prix : 8-2 million

"RQ-120-B Electric Pulse Automatic CNC EDM notches" is a precise instrument specially developed by Nanjing BKN Automation System Co., Ltd. for making inspection sample bars. It can be processed by controlled electric sparking method. It can be used to make longitudinal and transverse...

Thursday 29 September 2022

Overview of 24V, 8~48AH Battery Pack for Two Two-wheeler Battery Key Parameters Item Value Nominal Voltage: 25.6V Capacity： 8Ah~48Ah Maximum Charge Voltage: ~28.8V Maximum Charge Current: ~25A Charge Ambient Temperature Range: 0~45'C Maximum Discharge Current: ~50A...

Thursday 29 September 2022

Overview of 12~48V, 100AH~1000AH Battery Pack for Aerial Work Platform Key Parameters Item Value Nominal Voltage: 12V Capacity： 100Ah Maximum Charge Voltage: ~14V Maximum Charge Current: ~50A Charge Ambient Temperature Range: 0~45'C Maximum Discharge Current: ~200A...

Thursday 29 September 2022

Lithium ion battery for e cycle is designed as high power, high energy, long life batteries, which are fully automatically produced by KIJO's latest technology, reliable assembly technology and intelligent formation technology. As one of the leading electric bicycle battery suppliers ...

Thursday 29 September 2022

Electric Trike Lithium Battery Features: Long cruising range Super power Stable and reliable Super cold resistant Long cycle life Specification of DG Series Tricycle Battery Model Nominal Voltage Capacity Dimension Weight Terminal (V) (C5) (with acid) (Ah) Length Width...

Thursday 29 September 2022

Specification of 9.6 lithium ion battery Battery Model Rate Voltage（V） Rate Capacity（AH/10Hr) Dimension(mm) Weight（KG） Length Width Height KJ 9.6V7.2Ah 9.6 7.2 158 28 70 0.7 As a deep cycle lithium battery factory, we can offer kinds of energy storage battery for sale...

Thursday 29 September 2022

Specification of 36 volt lithium ion battery for bikes Battery Model Rate Voltage（V） Rate Capacity（AH/10Hr) Dimension(mm) Weight（KG） Length Width Height KJ-R002 36V10AH 36 10 360 86 130 3 KJ-R003 36V10AH 36 10 340 80 112 3 KJ-R004 36V10AH 36 10 405 72 88...

Saturday 24 September 2022

Laser hair removal treatment is based on the theory of selective photothermal action. Hair follicles and hair shafts are rich in melanin, and lasers can precisely and selectively target melanin for hair removal. After the melanin absorbs the energy of the laser, the temperature rises sharply...

Friday 23 September 2022

Diode laser hair removal machine treatment is to damage the hair follicles by laser means, and then permanently clean the hair. Its working principle is to take the pigment in the hair follicles and absorb a certain wavelength of laser light to form heat. Burning hair follicles is...

Thursday 22 September 2022

Prix : 0.8-3.7usd/pcs

New Year is a major holiday all over the world, and everyone will go on a shopping spree for New Year gifts. Most the people will visit each other during the festival, have different parties with friends and family, also to exchange each other New Year's gifts. Choose Our New Years...

Thursday 22 September 2022

Lathe machine introduction: Sealion Machine Tool supplies both vertical and horizontal lathe. We keep a high-level quality standard of our lathe machines for sale. Types of cnc lathes include high precision Chinese CNC lathe machine type or conventional type, and we have a precision...

Wednesday 21 September 2022

Prix : 5000-50000USD

Features of Automatic Tube Welding Machine CNC Automatic Butt Welding Machine is suitable for HDPE/PP and fittings of gas pipeline. The heating plate is automatically separated from the pipe at the end of the heating cycle. Automatic ejection for heating plate by hydraulic cylinder...

Wednesday 21 September 2022

Industrial Li-ion Module (LFP) The TRLiF Series of the 48-volt lithium battery pack has an extended long life with excellent consistency ensured by a fully automated production line. Combining LFP technology with standard 19" cabinets, which is highly suited for telecommunication...

Wednesday 21 September 2022

Industrial LFP Battery Pack (LFP) The TRLiF series are specially designed for the replacement of the most popular lead-acid accumulator cell models with LFP cells, which are widely used for UPS and energy storage systems, also suitable for Electric vehicles, E-bike, E-rickshaw e.g...

Wednesday 21 September 2022

Transfer your cargo safe and quick. We provide powerful and durable support for material handling equipment. TYPES OF TRACTION BATTERIES FOR SALE Tianneng traction battery cell provides powerful lead-acid traction batteries for material handling equipment, like forklifts, riders, stacks...

Wednesday 21 September 2022

TNX High Rate AGM Battery The TNX Series are specially designed for various data centers as high rate UPS batteries. The series of reserve power high rate battery can be applied in all kinds of UPS systems, high-rate current and emergency power systems and so on. The discharge output...

Tuesday 20 September 2022

Prix : 10-30USD

Breast Pump Instructions Benefits of breast feeding for babies Studies have shown that breast milk contains many substances not found in formula milk powder, which can protect your baby from many diseases and infections, such as ear infection, diarrhea, pneumonia, wheezing and bron- chiolitis...

Tuesday 20 September 2022

In summer, girls who love beauty will wear cool short skirts one after another, but they all want to show smooth and flawless legs, so they often choose to laser full body hair removal. So many beauty-loving girls turned their attention to laser hair removal medical beauty projects...

Saturday 17 September 2022

Quantité : 30 sets of - Prix : $1,000-$10,000

With the fast growth in the electronic industry, the demand for injection molding electronics is much higher. The injection molding electronics can be intricate or simple. Intricate injection molding electronics can be economical because they combine many parts into one piece which...

Saturday 17 September 2022

A dental impression is a mold removed from a tooth to diagnose and treat dental conditions. They are also used in forensic science. Impressions are also known as dental or dental casts. Usually, impressions are made in the dentist's office, although dentists may also travel to the...

Friday 16 September 2022

Colet Coffee Machine Review CLT Q006 is the first model one-touch cappuccino all in one coffee machine developed and manufactured by Colet factory, it is developed based on Colet's 2nd generation automatic coffee machine system in 2013. CLT Q006 coffee machine brews espresso, lungos...

Saturday 10 September 2022

TY203 series servo hydraulic press and CNC china hydraulic machine are independently developed and designed by Ningbo Tianyu Machinery Equipment Co., Ltd. with independent intellectual property rights. The servo hydraulic press fit machine adopts the imported touch screen for data...

Saturday 10 September 2022

This is a high-end CNC drilling machine for panel furniture, which has the advantages of high processing efficiency and a high degree of automation. The china servo press can realize six-side position processing and front and back groove processing at a time. TY10 series electric...

Saturday 10 September 2022

TY502 is the equipment independently developed by Tianyu Machinery Equipment Co., Ltd. It can detect whether the interference between components is fully in line with the design to prevent the products with unqualified fit clearance from entering into the next process. CNC hydraulic...

Saturday 10 September 2022

Why remove hair? Everyone wants their skin to be clean and fair, but some women have thick body hair and dare not wear skirts, especially in summer, when people show their bodies. Because of the thick hair on their bodies, it has a great impact on their overall image and is easy to give to them...

Saturday 10 September 2022

Quantité : 1 - Prix : 1 000,00 €

lng plant process After compression, the feed gas is processed by dehydration and heavy hydrocarbon separation units. Please see the attached PFD. Process description is detailed as follows: Feed gas compress unit After measuring, the feed gas flows into the compress unit, and boosts...

Saturday 10 September 2022

China solar pv battery storage can provide you with guaranteed energy to prevent power outages when photovoltaics cannot generate electricity. When the photovoltaic generates excess electricity, it is stored in the battery. Especially suitable for home installations and electric...

Saturday 10 September 2022

We offer a complete selection of sealed lead acid battery for solar system. SLA batteries are used in a wide variety of applications, including UPS battery backups, generators, golf carts, and more. These batteries are rechargeable, completely sealed, and maintenance-free; no need...

Saturday 10 September 2022

Prix : 100000-500000

A modular trailer is normally used for transporting heavy loads over 80t. It is generally applicable to the medium and long-distance highway transportation of overweight and ODC cargo (over length, over width, over height, overweight) in construction, mining, metallurgy, chemical industry...

Saturday 10 September 2022

Quantité : 10000

2023 World Battery Industry Expo (WBE) Formerly Asia Battery Sourcing Fair (GBF ASIA) Date: August 8th-9th (9: 00-17: 00); August 10th (9: 00-13: 00) Venue: China Import & Export Fair Complex, Guangzhou Website: en.battery-expo.com China Produced 324GWh of Lithium Batteries in 2021...

Friday 09 September 2022

Prix : 100USD

The smart spike guard, Techwin intelligent lightning surge protection device (smart spd), adopts the technology of Internet of things big data, integrate lightning protection devices and lightning protection monitoring modules to form a new lightning protection monitoring system,...

Friday 02 September 2022

E3 Lipo(2-3s) Balance Charger The absolute cheapest charger Balance automatically Reverse polarity protection Explanation of LED Status Drone Charger E3 Product DescriptionSpecification If you are looking for the absolute cheapest 2s lipo balance battery charger that still works...

Friday 02 September 2022

Rigid flex printed circuit boards, flex board and pcb rigid board connect after lamination and other processes, according to relevant technology requirements, the formed board has both FPC and PCB characteristics. Rigid flexible printed circuit board can be used in medical, aerospace...

Friday 02 September 2022

Huihe Circuits has extensive experience in manufacturing customized subway pcb for customers in the railway, rail transit and automotive industries.Understand the importance of high performance, high reliability and high robustness of products required by the transportation industry...

Thursday 01 September 2022

Quantité : 10 million - Prix : 1-100 yuan / piece

TWS EARPHONE COIN CELL Structure Design Structure with high security and efficient use of space makes the coin cell battery storage capacity higher than domestic peer corporations. Material Selection Advanced materials technology platform satisfies the requirements of 3~5C fast charge and 4...

Thursday 01 September 2022

Quantité : 10 million - Prix : 1-100 yuan / piece

STANDARD BATTERY MODULES FOR BASE STATION A standard battery module for the base station includes a plurality of unit cells; A first barrier located between adjacent ones of the unit cells; A second barrier located between adjacent ones of the unit cells and spaced from the first barrier...

Thursday 01 September 2022

Quantité : 10 million - Prix : 1-100 yuan / piece

HOUSEHOLD ENERGY STORAGE SYSTEM The maximum operating power is 3kw/5kw. These are several types of household energy storage systems with different rated energy, that is The 5.8WKh and 23 WKh. This battery-based energy storage system is mainly used with solar panels outside which...

Thursday 01 September 2022

Quantité : 10 million - Prix : 1-100 yuan / piece

LONG-SHELF-LIFE LFP POWER BATTERY FOR CONTAINERIZED ESS Cycle Life: The capacity retention rate≥80%@4500cycles, ≥70%@7000cycles. PARAMETERS OF LONG-SHELF-LIFE LFP 21700 BATTERY FOR CONTAINERIZED ESS Models: GSP42173135-150Ah——Mass production GSP54173202F-202Ah ——Trial production...

Thursday 01 September 2022

Quantité : 10 million - Prix : 1-100 yuan / piece

UPS ENERGY STORAGE SYSTEM The Application scenario of the communication base station backup power supply is the outdoor communication base station and the IDC machine room. In the aspect of communication base station, there are many different products, like 48100, 4810 and 4875...

Thursday 01 September 2022

Quantité : 30 sets of - Prix : $1,000-$10,000

2k injection molding is a manufacturing process that refers to molding two materials or colors into one plastic part. This technology combines two materials or two colors into one ending plastic part by using a 2K automotive plastic injection moulding machine. The selection of the...

Saturday 27 August 2022

Features of Metal Seated Gate Valve The stem is permanently sealed by three independent seals, and if the seal wears out after long use, the gland bolts only need to be tightened; Stem spherical stop-thrust, low friction resistance, so that the valve is light to open and close, low...

Saturday 27 August 2022

Festures of manual central heating balancing valve Straight flow structure, low fluid resistance; Handwheel display the number of opening cycles for easy debugging; Valve inlet and outlet have self - sealing test port; Valve disc self-balancing design, open and close is not affected...

Thursday 25 August 2022

Quantité : 500000 Pie - Prix : US $1 - 3,000 / Set

Categories: Butterfly Valve, Butterfly Valve By Form, Triple Offset Butterfly Valve Tag: What is a Valve Description The triple offset butterfly valve working or triple eccentric valve features a stem that is offset on both the X and Y axis of the butterfly valve center-line. This...

Thursday 25 August 2022

Quick evacuation in a low vacuum level range, reduce cost and shorten the working cycle It can produce large vacuum flow, and handle all porous workpieces fast and safely Easy installation and easy operation Reduce product noise greatly FEATURES COMBINED TYPE MULTISTAGE VACUUM GENERATOR...

Thursday 25 August 2022

AEVC Series Short action cycle Small size, lightweight, especially suitable for high-speed working Could be fixed with a suction cup and connector directly Reduce noise greatly PACKAGING(Carton) For Vacuum Generator with Fast Blow-off ForMETA SHEET(Thick Metal Plate) For Vacuum Generator...

Wednesday 24 August 2022

As a plastic injection moulding factory in China, Jeward Mould's packing mould category includes paint pail for chemistry and oil industry, lubricating oil bucket and many kinds of butter or cookie buckets for food packaging. As an excellent bucket mold maker, we also offer disposable...

Saturday 20 August 2022

Solar PV System Online Electricity Monitor Highlight Display the entire energy flow of your solar PV system Monitor the energy producing, consuming and selling back to grid Electricity bill & system income report by day, week, month, year and billing cycle Total Saving Report...

Friday 19 August 2022

Centrifugal concentrator is a kind of equipment for gravity separation of ore particles in a centrifugal force field, which is one of the high-efficiency gravity separation equipment. Our company mainly produces horizontal centrifuge and vertical centrifuge. Centrifuge Types Vertical...

Thursday 18 August 2022

Building decoration materials, also known as building finishing materials, refer to the materials laid or painted on the surface of buildings to decorate and beautify the environment. Building decoration materials are the important material basis of building decoration engineering...

Wednesday 17 August 2022

Quantité : 1 set - Prix : 5000USD-30000USD

Two Shot Tool Construction Part two shot tool construction saves the injection machine quantity and plant area, lower the labor cost and minimize the part handling, although mould cost is high but later process cost is lower, not on... Two Shot Plastic Injection Molding Parts How...

Wednesday 17 August 2022

Quantité : 1 set - Prix : 5000USD-30000USD

Sewing Machine Frame Mould Large plastic frame plastic injection sewing molds, suited for oversize embroidery projects. Mould Name: Embroidery Machine Frame Mould Part Material: Pa 66 GF50% Product Description Large Embroidery hoop inner frame Mould Cavity: 1 Cavity Mould Size: 400*600*380...

Wednesday 17 August 2022

Quantité : 1 set - Prix : 5000USD-30000USD

Injection Plastic Mold Injection plastic mold is another name for plastic injection mold. This is just how people in various places call injection molds differently. The injection plastic mold can be made as single cavity plastic mold or multi cavities injection mold according to...

Wednesday 17 August 2022

Quantité : 1 set - Prix : 5000USD-30000USD

Mould Name: Precision Automotive Plastics Mould Part Material: PA66 G30 Product Description: BODY plastic Mould Cavity: Cavities Mold Mould Cavity Steel: 2344ESR Mould Injection System: hot runner Mould Ejection System: ejector pin Mould Cycle Time: 26's Mould Life Cycle: 1,000,000 Lead Time...

Wednesday 17 August 2022

Prix : 100USD

Model: YEV-300 YEV-600 YEV-1000 YEV-2000 YEV-3000 Product Performance Force: 300kgf / 600kgf / 1000kgf / 2000kgf / 3000kgf Max acceleration: 100g(without load) Max displacement: 51mm Max speed: 1.6/1.8/2 m per minute Description of High-Frequency Electromagnetic Vibration Electromagnetic...

Tuesday 16 August 2022

Quantité : 100 - Prix : 100-10000

NEW ENERGY BATTERY PERFORMANCE TEST The new energy battery testing services provide one-stop testing and certification services for manufacturers and traders in the battery quality test, check car battery life. Battery testing services can provide testing and certification services...

Tuesday 16 August 2022

Quantité : 100 - Prix : 100-10000

Mechanical shock is the mechanical stress that a product often encounters during its life cycle. The impact on the product mainly depends on the product's instantaneous response to the shock. The shock response is affected by the magnitude and duration of the shock, as well as the...

Saturday 13 August 2022

Toshiba front load T03 Washer equips with Anti-Bacteria Gasket can effectively inhibit bacteria growth and protect your health. Besides, THE GREATWAVES™ brings great color protecting performance and significant energy saving. The innovative integrated control panel is unique and easy to operate...

Saturday 13 August 2022

Toshiba T01 Washer equipped with the GREATWAVES™ and real INVERTER™ leads to the best color protecting and energy saving. Knob is designed based on ergonomics, most suitable for smooth rotation. Classic black door and white body look simple but shiny. Large LED screen shows all the...

Saturday 13 August 2022

What is a freestanding washing machine？ The Midea Lunar Series has an integrated Health Guard system. Health Guard focuses on Steam Care as a top priority program to eliminate bacteria inside fabrics with hot steam to achieve 99.99% sterilization. The drum is cleaned automatically...

Saturday 13 August 2022

MF200 with Lunar Dial and Health Guard technology gives the consumer not only convenient operation experience but also health guarantee. The Turbo Wash helps to speed up the washing cycle, saving up to 40% of wash time whilst maintaining the same great performance. With the Midea Lunar Series...

Saturday 13 August 2022

Midea MF100 is specially designed with a ultra-silm figure, which is only 400mm in depth and perfectly fits espcailly limited space. Multiple washing options have been set to fulfill your requirements under different scenarios. Hygiene 90℃ wash removes hazardous substance while cold...

Friday 12 August 2022

Quantité : 50000-8000 - Prix : 8-15USD

GCYFXTY air blown fiber optic cable is a loose tube made of a high modulus material with a 250µm single-mode or multi-mode fiber. The tube is filled with a non-toxic and harmless waterproof compound, and the loose tube is twisted with a non-metallic reinforcing element. Then extruded...

Friday 12 August 2022

Rosun chlorine powder for sale is an advanced oxidation technology basing on sulfate radical [SO4-], using potassium monopersulfate compound powder(2KHSO5.KHSO4.K2SO4)as its active ingredient. By using high-energy activation technology to produce active oxygen [O] through the chain...

Friday 12 August 2022

Rosun water disinfectant powder is an advanced oxidation technology basing on sulfate radical [SO4-], using potassium monopersulfate compound powder (2KHSO5.KHSO4.K2SO4)as its active ingredient. By using high-energy activation technology to produce active oxygen [O] through the chain...

Friday 12 August 2022

Quantité : 1000

Soxi is one of the top industrial chiller manufacturers in China. Industrial water chiller system plays an important part in the plastic moulding process, injecting frozen water into the flow channel inside the mold, cooling the mold through heat exchange, maintaining the temperature...

Thursday 11 August 2022

Thermal vision, see and analyze the temperature. AT31F/61F adopts a high-performance VOx detector with high resolution and high sensitivity. Combined with the Matrix Ⅲ patented image algorithm, it provides clearer images and more temperature details. Its patented intelligent temperature...

Tuesday 09 August 2022

Quantité : 15~20PCS/Y - Prix : 200-10000000dollars

GKSA series electric actuator is integrated linear actuator, it uses eletronic component instead of mechanical components with modular structure. Frequency conversion integrated actuators built-in frequency converter, so as to achieve reasonable use of energy. Standard Design of GKSA-Series...

Tuesday 09 August 2022

Prix : 100000-5000000

Hiconics's HEC-T home energy storage battery split phase model has following features: Systematic design, in-depth optimization and seamless connection with Hiconics Hybrid inverter; Better stability: Safest type of LifePO battery, an adoption of high-performance processors, international...

Tuesday 09 August 2022

Prix : 100000-5000000

Hiconics's HEC-S 5000D is an Intelligent all-in-one home energy storage system (with LFP battery), especially for Europe. Our HEC-S 5000D model has the following strengths: Safety- CATL LFP Battery, IP65; Simple- Plug and play, 30 min quick installation; Interconnection- Global cloud...

Tuesday 09 August 2022

Prix : 100 000,00 €

Hiconics's HEC-S 3680D is hybrid inverter with solar battery charging system (with LFP battery), especially for the UK. Safety: CATL LFP Battery, IP65; Simple: Plug and play, one person 30 min quick installation; Interconnection: Global Cloud service platform & Mobile APP. Technical...

Tuesday 09 August 2022

Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, this method of making the casting products is so-called sand casting. There are several different kinds of sand applying to industrial...

Friday 05 August 2022

Quantité : 300K units - Prix : 133-250USD

This stainless steel dish washing machine with a width of 60 centimeters and a stainless steel tub. You can put up to 16 place settings in the dishwasher. It is touch control, and you can delay the cycle up to 24 hours to run the stainless steel dishwasher at a later time. With the...

Friday 05 August 2022

Specifications General Frequency Range 320-475MHz; 806-870MHz Dimensions(H×W×D) mm 123.5 × 55.5 × 32.5 Weight 265g (with standard battery and 6.5cm antenna) Operating Voltage 3.85V Battery 3800mAh Li-Polymer battery Battery Life (TMO 5/5/90 duty cycle) >22 hours ...

Friday 05 August 2022

Mobile cranes are usually faced with challenges from diversified working conditions, from high-speed travel on highway to heavy load on rough terrains. The Ortec mobile crane tyre range is engineered with great comfort, durability and most important safety. Ortec provides three tread...

Friday 05 August 2022

The Ortec construction tire range includes a variety of construction machinery tyres for backhoe loaders, telehandlers, compact loaders, graders and compactors, which are widely used in rough terrains in civil projects, road projects, etc. As the work conditions of construction equipment...

Friday 05 August 2022

The wheel bulldozers shares similar tire ranges with wheel loaders. But as a higher percentage of wheel bulldozers are used in mining and quarrying, especially at the loading site and the dumping site, the tires are challenged with higher risks of puncture, cutting on tread and sidewall...

Friday 05 August 2022

As equipment like backhoe loaders and compactor loaders are built to be versatile and be suitable for different working conditions, Ortec developed this NRL4 backhoe loader tires pattern. The special tread design makes backhoe tires suitable for different applications in construction...

Friday 05 August 2022

As articulated dump trucks are usually used in material hauling over rough terrain especially great inclines and slippery conditions, the ADT tires are required to deliver good traction, build less heat, withstand big load, apart from the features like good resistance to wear or cut...

Wednesday 03 August 2022

Plants rely on the energy of light for photosynthesis to grow, blossom, and bear fruit. However, due to the ever-changing climate change and light change in nature, plants can not fully absorb the photosynthetic nutrients they need in different growth periods, which brings disadvantages...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

The same type of material of different colors is usually used for two-color injection overmolding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product, the performance...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

The runner filling balance must be considered when designing the multi cavity plastic mold in order to ensure the best effect of filling balance, the multi cavity mold will be multiple of 4 to design the mold generally, such as 4. 8. 16. 32. 64. 128 points, etc. ; Most of the multi-cavity...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

USM will offer suggestions according to product requirments, quantity, material cost and so on to chose the hot runner in order to help customers to save cost. Hot runners are divided into open hot nozzles, pin-point hot nozzles, valve hot nozzles, etc. our engineer will chose the...

Tuesday 02 August 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Medical TPE Mold Design is the source of a high-quality mold, one good mold design will be half success, USM uses the world's leading software to analyze products and make DFM reports and mold flow analysis to eliminate the appearance of defective and defective products from the source...

Tuesday 02 August 2022

Silicone rubber injection molding has more than a half-century history since the late 1970s. There are two molding ways of silicone rubber injection molding process: Liquid Silicone Rubber Injection Molding (LSR) and Solid Silicone Rubber Molding. There are thousands of applications...

Tuesday 02 August 2022

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts. Multi...

Tuesday 02 August 2022

With more than 20 years of experience in clean room injection molding, as the medical silicone molding company in China, we specialize in various clean room injection molding process techniques including medical silicone injection molding and medical grade silicone injection molding...

Tuesday 02 August 2022

Packson is not totally the same as other medical molding companies. Because we are an ISO-certified medical molding provider. Packson had got the certification of ISO 13485: 2018 and ISO 9001: 2008. We've been working with healthcare and medical companies like BD, Wondfo since 2008...

Tuesday 02 August 2022

2k injection molding is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years mold...

Tuesday 02 August 2022

Quantité : 9000 - Prix : USD10-USD1000000

The cooling tower drift eliminator is designed to reduce a large number of small water droplets drift in the hot and humid air discharged from the cooling tower. The function of the drift eliminator in the cooling tower is to avoid water mist pollution and icing on the surrounding environment...

Tuesday 02 August 2022

Quantité : 9000 - Prix : USD10-USD1000000

Closed circuit cooling tower (also known as an evaporative air cooler or closed cooling tower) is the tubular heat exchanger placed in the tower, through the circulation of air, spray water and circulating water heat exchange to ensure the cooling effect. AUVC not only provides...

Thursday 28 July 2022

AOC is a cabling technology that accepts the same electrical inputs as a direct attach cable, but uses optical fiber "between the connectors". AOC uses electrical-to-optical conversion on the cable ends to improve speed and distance performance of the cable without sacrificing compatibility...

Thursday 28 July 2022

There are many kinds of metals and composites that come as Abrex 500 sheets and are utilized in assembling processes. The best decision of material for a creation generally relies upon its last application. Significant variables to be considered incorporate formability, weldability...

Wednesday 27 July 2022

A screw is a kind of latch that is strung into another part, like a plate. A s30400 bolt requires a nut to frame a gathering. We know all about the expression stray pieces, yet no one at any point utilizes the expression nuts and screws. There are relatively few fastener in an infusion...

Friday 22 July 2022

Quantité : 10000 Piec - Prix : 150USD-10000USD

Overview of PDC Hole Opener PDC drill bit opener is designed for the enlargement of pilot holes and large hole applications. They are also used for road and river crossing applications. The hole opener is made of AISI 4145H fully heat-treated alloy steel. All products have carbide...

Thursday 21 July 2022

KHD Valves Automation Pvt Ltd is a top leading well known manufacturer of high-quality Ball Valves Manufacturer in Mumbai, India.We are a leading manufacturer of Single Piece Design Ball Valves in Mumbai and the nearby. We are a manufacturer of High-quality Two Way Ball Valves in Mumbai...

Wednesday 20 July 2022

General Purpose GEL Battery The TNG storage gel battery integrates patent nano gel electrolyte with up-to-date AGM structure. This type of lead-acid cell offers over 12 years of design life with very high deep cycling capability. Thus, this gel deep cycle battery series is highly...

Wednesday 20 July 2022

General Deep Cycle battery Whenever you want to drive something around, put these small sealed lead-acid batteries on! With a number of national patent technologies and extended cycle life, the TNE series is highly suitable for deep cycle applications such as electrical bicycles/tricycles...

Wednesday 20 July 2022

Deep Cycle Premium Battery Enjoy a much longer mileage. Designed by Tianneng Power, one of the professional motive power battery manufacturers in China, our TNEP series is highly durable to deep cycle application with longer distance. Take time to go further with your electric vehicles...

Wednesday 20 July 2022

Lead Carbon (Pb-C) Battery The TNC series of wind energy batteries adopt the newest lead-carbon technology which adds carbon material into the negative electrode to slow down the sulfation. The carbon enhanced lead acid battery provides not only high energy density but also high power...

Wednesday 20 July 2022

E-moped Li-ion Pack (NCM) The TMLiN Series use materials such as Li(NiCoMn)O2 and LiMn2O4, which have high specific energy, long cycle life, good safety, and excellent high and low-temperature performance. These rechargeable lithium battery packs are light and easy to carry, have...

Tuesday 19 July 2022

This cnc vertical turning machine tool takes the common 14-26 inch Kaba wheel hub rough and fine turning as the main processing object and has the advantages of high efficiency, uniform grain, stable performance, and so on. FEATURES OF VERTICAL TURNING CENTER SPECIAL FOR WHEEL HUB...

Tuesday 19 July 2022

single station Suitable for various heavy cutting and high precision machining fields TYPES OF HORIZONTAL MACHINING CENTER FOR SALE HORIZONTAL MACHINING CENTER ADVANTAGES The new horizontal machining center is generally used for processing box parts. The overall structure of the horizontal...

Friday 15 July 2022

Prix : 10-30USD

Contact us to buy 24v rechargeable lithium ion battery. Rechargeable 24v lithium ion batteries for sale. 24 Lithium Ion Battery Specification of 24v lithium ion deep cycle battery Now the price of 24v lithium ion batteries for sale is affordable, if you have needs, please contact us...

Friday 15 July 2022

Prix : 10-30USD

10.8v Lithium Ion Battery Specification of 10.8V Lithium ion Battery Battery Model Rate Voltage（V） Rate Capacity（AH/10Hr) Dimension(mm) Weight（KG） Length Width Height KJ 10.8V40Ah 10.8 40 195 130 156 4 As a gel battery factory, we have types of gel deep cycle battery for sale...

Friday 15 July 2022

Prix : 10-30USD

KIJO is engaged in manufacturing different types of rechargeable batteries in China: Energy rechargeable storage battery, reserve power battery, motive power battery and lithium battery. The lithium ion battery is compatible with any application powered by lead acid, gel or AGM battery...

Friday 15 July 2022

Dedicated for round tubes and fully automatic in bundle loading, feeding and cutting. Overview of Round Tube Laser Cutting Machine With the rapid development of laser technology, round tube laser cutting machine has become the preferred equipment for the pipe processing industry....

Friday 15 July 2022

Overview of Heavy Duty Tube Laser Cutting Machine Large tube laser cutting uses a focused high-power-density laser beam to irradiate the workpiece, so that the irradiated material quickly melts, vaporizes, ablates, or reaches the ignition point while blowing away the molten material...

Friday 15 July 2022

HDPE extrusion machine production line adopts the most advanced technology of Europe, It is a new research achievement of energy-saving production line, which is suitable for high-speed extrusion of HDPE, PP, and other polyolefin pipe. compared with cornmon production line, the...

Friday 15 July 2022

JWELL Extrusion Machinery Co., Ltd is one of the leading hdpe blow molding machine manufacturersand blow molding machine suppliers in China. The HDPE blow molding machine, also called HDPE blow moulding machine, is mainly used for processing unsupported parisons. The advantages of...

Friday 15 July 2022

The new energy connector plugs / connector socket plug conform to global quality standard.Its design includes a complete latching system that ensures clear electronic and mechanical connections and allows the selection of the ideal connector for the specific application. Features...

Thursday 14 July 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

The aluminium frames around the solar panel is an important but often ignored component of a solar panel. Aluminium profile solar panel frame and mounting bracket are normally used to seal and fix solar battery components. As one of the important industrial alu solar profile produced by Otalum...

Thursday 14 July 2022

Wholesale Strand Woven Bamboo Flooring HQC Bamboo fossilized strand woven solid bamboo is commonly known as the bamboo board (also called, carbonized strand woven bamboo flooring), which is a kind of eco-friendly flooring. The product made of natural carbonized strand woven bamboo...