FPGA - 80 Annonces

Jeudi 25 avril 2024

Prix : 100USD

M4K08 1. Adopt plug-in structure, with the number of input channels and output channels optional. 2. With optional HDMI, DVI, VGA, SDI and other interfaces, support full seamless output. 3. When the HDMI signal is output, it supports a variety of common resolutions such as 800*600~4K@30Hz...

Jeudi 25 avril 2024

Prix : 100USD

1. Adopt plug-in structure, with the number of input channels and output channels optional. 2. With optional HDMI, DVI, VGA, SDI and other interfaces, support full seamless output. 3. When the HDMI signal is output, it supports a variety of common resolutions such as 800*600~4K@30Hz...

Jeudi 25 avril 2024

Prix : 100USD

1. Adopt plug-in structure, with the number of input channels and output channels optional. 2. With optional HDMI, DVI, VGA, SDI and other interfaces, support full seamless output. 3. When the HDMI signal is output, it supports a variety of common resolutions such as 800*600~4K@30Hz...

Jeudi 11 avril 2024

Scan Heads UltraScan products cover a comprehensive range of models, suitable for customers with high cost performance requirements and substitute imported similar products. The coating film selection of galvanometer mirror scanner is rich, UV, green, fiber, CO2 and other coating options...

Jeudi 11 avril 2024

Polygon Scanner Different from galvanometer control technology, polygon laser scanner has rotary mirror which adopts advanced bearing and spindle design, rotating speed up to 50,000 RPM, scanning rate over 100 KHz, scanning speed up to 512 m/s (1600 lines/s) and makes ultra-fast and...

Jeudi 14 mars 2024

Prodigy Player Pro Prodigy Player Pro is a rapid prototyping software that works with the FPGA-based prototyping platforms from S2C. Prodigy Player Pro plays three roles in speeding your development process - it configures the prototype, runs remote system management and provides...

Jeudi 14 mars 2024

Multi-Debug Module Pro The S2C Prodigy Multi-Debug Module is an innovative debug solution for FPGA prototyping. The S2C multi-debug has the ability to run deep-trace debugging on multiple FPGAs simultaneously. Multi-FPGA Debugging can trace up-to 32K signals per FPGA in 8 groups of...

Jeudi 14 mars 2024

Virtex UltraScale Series S2C's Prodigy Virtex UltraScale VU440 Logic Systems are engineered to leverage the capabilities of the Xilinx Virtex Ultrascale VU440 FPGA. These systems are highly adaptable and suitable for various technical applications, including high-speed networking...

Jeudi 14 mars 2024

Prodigy S7-13P Logic System The Prodigy S7-13P Logic System, featuring Xilinx's cutting-edge Virtex UltraScale+ VU13P FPGA (also known as XCVU13P FPGA), is an advanced prototyping platform that offers enhanced capacity and performance. With its innovative design, the Prodigy S7-13P...

Jeudi 14 mars 2024

Prodigy S7-9P Logic System – Prototyping with VU9P FPGA Prodigy S7-9P Logic System The Prodigy S7-9P Logic System by S2C is an entry-level multi-FPGA prototyping solution that utilizes the advanced Xilinx VU9P FPGA (also known as XCVU9P / XCVU9P Xilinx FPGA) from the Virtex UltraScale+ series...

Jeudi 14 mars 2024

Prodigy S7-19P Logic System The Prodigy S7-19P Logic Systems utilize Xilinx's highest capacity FPGA hardware, the Virtex UltraScale+ VU19P FPGA, (also known as XCVU19P FPGA) making them ideal for ASIC/SoC applications that demand high logic capacity, interconnect, and bandwidth....

Mercredi 07 février 2024

Quantité : 65000 - Prix : 500—15000(USD)

Scan Heads UltraScan products cover a comprehensive range of models, suitable for customers with high cost performance requirements and substitute imported similar products. The coating film selection of galvanometer mirror scanner is rich, UV, green, fiber, CO2 and other coating options...

Mercredi 07 février 2024

Quantité : 65000 - Prix : 500—15000(USD)

Polygon Scanner Different from laser galvanometer control technology, polygon laser scanner has rotary mirror which adopts advanced bearing and spindle design, rotating speed up to 50,000 RPM, scanning rate over 100 KHz, scanning speed up to 512 m/s (1600 lines/s) and makes ultra-fast...

Jeudi 07 décembre 2023

Prix : 500—15000(USD)

The ordinary laser drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processing. Besides the standard straight hole and the taper hole processing, the 5-axis laser micro machining system can also process the inverted cone hole...

Vendredi 24 novembre 2023

All versions of the Prodigy S7 Logic Systems can be used standalone or over multiple systems. The Prodigy Logic System are supported by the industry's broadest set of advanced FPGA solutions in S2C's Prodigy Complete Prototyping Solutions including: Prodigy ProtoBridge™ for linking...

Vendredi 24 novembre 2023

With its latest stratix 10m FPGA technology, the S2C Prodigy intel fpga stratix 10 GX 10M FPGA module is compatible with 90+ Prodigy daughter card libraries, with a maximum capacity of up to 318 M ASIC gates in one FPGA. S2C's Stratix 10M Prodigy Logic System enables users to take...

Vendredi 24 novembre 2023

S2C's altera arria 10 Prodigy Logic System, built on the intel arria fpga, is an affordable solution for a variety of design sizes and applications. The Single arria 10 board Prodigy Logic System is perfect for both prototyping small- to medium-sized SoCs and high-performance computing...

Vendredi 24 novembre 2023

S2C's FPGA Prototyping system has been in the market since 2004 and has since been widely adopted by many leading SoC/ASIC design companies. The Prodigy Logic Module series are specially designed with low profile and affordability in mind. The Prodigy Logic Modules are based on Xilinx's VU...

Vendredi 24 novembre 2023

Prototype Ready IP S2C offers the largest library of off-the-shelf interfaces and accessories for FPGA prototyping, referred to as Prototype Ready IP, also known as daughter boards. These fpga daughter boards are ready-to-use interfaces and accessories that seamlessly integrate with...

Vendredi 24 novembre 2023

Prodigy™ Complete Prototyping Solutions The Prodigy family by S2C is a comprehensive solution for IC designers focusing on FPGA and ASIC prototyping. The Prodigy Complete FPGA based prototyping Solutions by S2C is meticulously engineered to address the requirements of IC designers...

Vendredi 03 novembre 2023

Guangdong AVCiT Technology Holding Co., Ltd(Stock name: AVCiT Technology, Stock Code: 001229) provides Integrated IP Based KVM Solutions and Distributed & Fiber KVM Matrix System for Command & Control Room, with revolutionary technologies which greatly add more value to your...

Vendredi 03 novembre 2023

Guangdong AVCiT Technology Holding Co., Ltd(Stock name: AVCiT Technology, Stock Code: 001229) provides Integrated IP Based KVM Solutions and Distributed & Fiber KVM Matrix System for Command & Control Room, with revolutionary technologies which greatly add more value to your...

Vendredi 03 novembre 2023

Guangdong AVCiT Technology Holding Co., Ltd(Stock name: AVCiT Technology, Stock Code: 001229) provides Integrated IP Based KVM Solutions and Distributed & Fiber KVM Matrix System for Command & Control Room, with revolutionary technologies which greatly add more value to your...

Vendredi 03 novembre 2023

Guangdong AVCiT Technology Holding Co., Ltd(Stock name: AVCiT Technology, Stock Code: 001229) provides Integrated IP Based KVM Solutions and Distributed & Fiber KVM Matrix System for Command & Control Room, with revolutionary technologies which greatly add more value to your...

Vendredi 03 novembre 2023

Guangdong AVCiT Technology Holding Co., Ltd(Stock name: AVCiT Technology, Stock Code: 001229) provides Integrated IP Based KVM Solutions and Distributed & Fiber KVM Matrix System for Command & Control Room, with revolutionary technologies which greatly add more value to your...

Mardi 29 août 2023

Quantité : 65000 - Prix : 500—15000(USD)

UltraScan products cover a comprehensive range of models, suitable for customers with high cost performance requirements and substitute imported similar products. The coating film selection of galvanometer mirror scanner is rich, UV, green, fiber, CO2 and other coating options....

Mardi 29 août 2023

Quantité : 65000 - Prix : 500—15000(USD)

Different from galvanometer control technology, polygon laser scanner has rotary mirror which adopts advanced bearing and spindle design, rotating speed up to 50,000 RPM, scanning rate over 100 KHz, scanning speed up to 512 m/s (1600 lines/s) and makes ultra-fast and ultra-cutting-edge...

Mercredi 23 août 2023

Prodigy Player Pro Prodigy Player Pro is a tool that works with the FPGA-based prototyping platforms from S2C. Prodigy Player Pro plays three roles in speeding your development process - it configures the prototype, runs remote system management and provides set up for multi-FPGA debugging...

Mercredi 23 août 2023

Multi-Debug Module Pro The S2C Prodigy Multi-Debug Module is an innovative debug solution for FPGA prototyping. The S2C multi-debug has the ability to run deep-trace debugging on multiple FPGAs simultaneously. Multi-FPGA Debugging can trace up-to 32K signals per FPGA in 8 groups...

Mercredi 23 août 2023

Prodigy S7-9P Logic System The Prodigy S7-9P Logic System by S2C is an entry-level multi-FPGA prototyping solution that utilizes the advanced xilinx virtex ultrascale+ vu9p fpgas (also known as XCVU9P FPGA) from the Virtex UltraScale+ series. Abundant DSP slices and memory resources...